MT Auto power brake assembly

[tom7254]

Need automatic power brake assembly (pedal) for a 1966 K20, or other year if it works. Tom

[1960chevypanel]

Same pedal for manual and power as far as I know. The pedal pad is different, says Power Brake.

[tom7254]

Is the pedal pad wider or same width. If same would I just have to remove clutch pedal arm and pad?

[1960chevypanel]

Same width. Not like in some vehicles where the brake pedal is wider on automatics. I would pull out the whole pedal assembly and put it on a bench, from there it's fairly easy to see how to eliminate the clutch pedal.

[tom7254]

Thanks for the info. Tom

[1960chevypanel]

No sweat.

[pimpston65]

Originally Posted by tom7254

Thanks for the info. Tom

Did you need the “power brake” pedal? Cuz I have a few extra repops

[tom7254]

I’ll probably remove clutch pedal and use existing brake pedal. If I go the other route I’ll contact you. Tom

[pimpston65]

Originally Posted by tom7254

I’ll probably remove clutch pedal and use existing brake pedal. If I go the other route I’ll contact you. Tom

ok

[dbchevy65]

Originally Posted by pimpston65

Did you need the “power brake” pedal? Cuz I have a few extra repops

Hi I’m interested in a few of your power brake pads. I pm you. Thanks

[GMCNUT]

Originally Posted by 1960chevypanel

Same pedal for manual and power as far as I know. The pedal pad is different, says Power Brake.

Tom, the difference is a welded on metal piece intended to make the pedal sit lower to the floor - hence the name "low pedal" power brakes. So, the arms are and are not the same. Are in that they are cast the same as one another, but the PB one gets modified after that casting to be a PB arm. Hope that makes sense.

[1960chevypanel]

Originally Posted by tom7254

I’ll probably remove clutch pedal and use existing brake pedal. If I go the other route I’ll contact you. Tom

I think Pimpston was just offering you the pad here, not the whole pedal. If you want a pad that says Power Brake on it.

[pimpston65]

Originally Posted by 1960chevypanel

I think Pimpston was just offering you the pad here, not the whole pedal. If you want a pad that says Power Brake on it.

yes that is correct, just the pad. thanks for the catch 1960chevypanel. but if the whole assembly is needed i have an extra one.

[pimpston65]

Originally Posted by dbchevy65

Hi I’m interested in a few of your power brake pads. I pm you. Thanks

did you want the pad or the whole assembly?

[tom7254]

How much for whole assembly.

[pimpston65]

Originally Posted by tom7254

How much for whole assembly.

let me go pull it to make sure all is there, free just cover shipping once i have it in my hands.

[tom7254]

Ok

[pimpston65]

Originally Posted by tom7254

Ok

the setup is from a manual with the clutch pedal removed, i thought is came as an auto.

[tom7254]

Thanks for looking.