New Member

[mongocanfly]

Welcome....should make a sweet ride...
I would look for a good set of axles and drivetrain from a square body truck...I'd try to stay away from the fulltime 4x4 yrs....what engine and trans are you planning?...also your chosen tire size and axle ratios will need considered

Originally Posted by mongocanfly

Welcome....should make a sweet ride...
I would look for a good set of axles and drivetrain from a square body truck...I'd try to stay away from the fulltime 4x4 yrs....what engine and trans are you planning?...also your chosen tire size and axle ratios will need considered

Not sure on BB/SB yet.... Will have to see what pops up. Going old school motor (ie no LS swap). I will be using a 700r4 coupled to a NP205. Axles will depend on what I find. I'm thinking I will have to narrow what ever I come up with. Early 70's would be nice so I can use the old school bolt on hubs.

Here is a 3/4 ton 44 I narrowed a few years back using stock shafts from different axles. It was for a 48 Ford F3 I converted