69 shortbed emergency brake cable routing

[LockDoc]

Originally Posted by Hatzman

Does anyone have a photo of how the cable is routed and sits under the hood of a 1970 C10 Shortbed?

Thank you

The upper clamp bolts to the inner fender panel and the lower clamp bolts to the frame. Small rubber gromet where the cable goes through the firewall.

LockDoc

[Hatzman]

Thank you LockDoc,

You don't by chance have an actual photo of the way it rests under the hod, do you? Also, what do the clamps look like? I have a bag full of them and not sure what goes where at this point.

Originally Posted by LockDoc

The upper clamp bolts to the inner fender panel and the lower clamp bolts to the frame. Small rubber gromet where the cable goes through the firewall.

LockDoc

[FirstOwner69]

Here are pictures of my '69 long bed. I'd expect the cowl to frame portion would be the same as a short bed.

[Hatzman]

Thank you Jim!

Does the e-brake line go between the inner fender and the two brake lines going up to the master cylinder? Or around the brake lines?

Originally Posted by FirstOwner69

Here are pictures of my '69 long bed. I'd expect the cowl to frame portion would be the same as a short bed.

[FirstOwner69]

Originally Posted by Hatzman

Thank you Jim!

Does the e-brake line go between the inner fender and the two brake lines going up to the master cylinder? Or around the brake lines?

It's rearward of the brake lines. You can also see that in the second pic of my previous post. The cable goes rearward behind the top shock mount. The brake lines run down the frame in front of the shock mount.