CA Wanted truck rally trim rings - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**a1vintage69** · 05-22-2020, 10:37 AM

I am looking to buy a nice set of rally wheel trim rings. they can be truck or car but have to be 15". I will take one or a whole set of four. Here is a picture of Corvette 3" rings on my Blazer.

**1970 CST Short Wide** · 05-22-2020, 06:55 PM

I have a pair of 2” 15s. There re pops from China. You can have them for shipping cost if you want them

**a1vintage69** · 05-22-2020, 08:16 PM

Thank you for the generous offer for the 2". a set of the 2-1/2's would be ok but I really want wider ones.a1

**Ironhorse** · 05-22-2020, 08:37 PM

How "nice" are you looking for? I have some original 15'' GM brushed finish stainless steel 3'' trim rings in the stash. Not sure if I have a full set or a pair or...? Let me know how nice and how many you need. I can look tomorrow.

**a1vintage69** · 05-22-2020, 08:45 PM

Quote:

Originally Posted by Ironhorse

How "nice" are you looking for? I have some original 15'' GM brushed finish stainless steel 3'' trim rings in the stash. Not sure if I have a full set or a pair or...? Let me know how nice and how many you need. I can look tomorrow.

I would consider driver condition. just not big dings and road or curb rash. thanks,a1

**Ironhorse** · 05-23-2020, 08:11 AM

Pics of the last three trim rings I have. Two are polished stainless and one is brushed finish stainless. Nice 10' driver quality with some minor scuffing or dings. Side by side pair are polished, lower trim ring brushed finish. No big dents and hard curbed edges. Hard to show condition with stainless and chrome. All I have right now, $10 each plus shipping.

**a1vintage69** · 05-23-2020, 08:18 AM

thanks Ironhorse, I am headed out to look at some today locally .

**Ironhorse** · 05-23-2020, 08:23 AM

Not a problem, let me know if have an interest.

John H. · 05-23-2020, 09:50 AM

You may look into these. I asked and they do have a stem slot. They look to have the GM style holders.

https://www.ebay.com/itm/15-NOS-CHEV...112133686435ui

**1970 CST Short Wide** · 05-23-2020, 04:53 PM

Quote:

Originally Posted by a1vintage69

Thank you for the generous offer for the 2". a set of the 2-1/2's would be ok but I really want wider ones.a1

No problem I’ll put them back on the shelf. I have the wider ones on my truck

**Ironhorse** · 05-25-2020, 06:51 PM

a1, any interest in the 3'' rings I have? Not show but nice driver 10 footers and original GM.

**a1vintage69** · 05-25-2020, 06:56 PM

Quote:

Originally Posted by Ironhorse

a1, any interest in the 3'' rings I have? Not show but nice driver 10 footers and original GM.

Can you do $50 shipped?

**Ironhorse** · 05-25-2020, 07:28 PM

Quote:

Originally Posted by a1vintage69

Can you do $50 shipped?

I can do $50 shipped for all three if you can do a money order as I don't have Paypal. LMK if that works for you and I will PM my mailing info.

**Ironhorse** · 05-25-2020, 09:09 PM

Trim rings SOLD to a1vintage69. PM sent with payment info. Thanks,

**CarlsLQ9SS** · 05-25-2020, 09:43 PM

Did you find all 4?

**a1vintage69** · 05-25-2020, 09:54 PM

Quote:

Originally Posted by CarlsLQ9SS

Did you find all 4?

I still need a matching set of 4. or two like the ones ironhorse posted.

**CarlsLQ9SS** · 05-25-2020, 09:58 PM

Quote:

Originally Posted by a1vintage69

I still need a matching set of 4. or two like the ones ironhorse posted.

I have some extras but not sure on the condition. I will check them tomorrow and let you know. Do you still have the deluxe radio knobs?

**a1vintage69** · 05-25-2020, 10:05 PM

Quote:

Originally Posted by CarlsLQ9SS

I have some extras but not sure on the condition. I will check them tomorrow and let you know. Do you still have the deluxe radio knobs?

Yes,68-72 deluxe radio knobs

**CarlsLQ9SS** · 05-25-2020, 10:17 PM

Quote:

Originally Posted by a1vintage69

Yes,68-72 deluxe radio knobs

If I have some decent ones we may get on some kind of trade. I dont know what they or worth though

**CarlsLQ9SS** · 05-26-2020, 04:58 PM

Pics

**CarlsLQ9SS** · 05-26-2020, 05:01 PM

Few more

**a1vintage69** · 05-26-2020, 07:58 PM

Carl, those are good for a driver rig. how much do you want? send me a pm. thanks, a1

**CarlsLQ9SS** · 05-26-2020, 09:01 PM

Sent you a PM, the two best ones are pictured. The third isn't any good

**CarlsLQ9SS** · 05-27-2020, 02:13 PM

Tracking number.

05-22-2020, 10:37 AM	#1
a1vintage69 Senior Member Join Date: Apr 2015 Location: Redding, Ca. Posts: 4,031	Wanted truck rally trim rings I am looking to buy a nice set of rally wheel trim rings. they can be truck or car but have to be 15". I will take one or a whole set of four. Here is a picture of Corvette 3" rings on my Blazer. Attached Images

05-22-2020, 06:55 PM	#2
1970 CST Short Wide Senior Moment Join Date: Mar 2002 Location: Pittsburg Ca Posts: 4,215	Re: Wanted truck rally trim rings I have a pair of 2” 15s. There re pops from China. You can have them for shipping cost if you want them Attached Images __________________ 1970 CST LS 1 6 speed Ford 9 inch Detroit Tru Track, Dakota Didgital, Vintage Air, QA1 Coil Overs Front & Rear Lots of FUN 2013 GMC PU, Oldest Son 71 GMC LWB. QA1 Suspension, Angry SB. Youngest Son 2017 Toyota SUV Daughters car 2018 Traverse , Wife’s Ride Pittsburg Ca 94565

05-22-2020, 08:16 PM	#3
a1vintage69 Senior Member Join Date: Apr 2015 Location: Redding, Ca. Posts: 4,031	Re: Wanted truck rally trim rings Thank you for the generous offer for the 2". a set of the 2-1/2's would be ok but I really want wider ones.a1

05-22-2020, 08:37 PM	#4
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	Re: Wanted truck rally trim rings How "nice" are you looking for? I have some original 15'' GM brushed finish stainless steel 3'' trim rings in the stash. Not sure if I have a full set or a pair or...? Let me know how nice and how many you need. I can look tomorrow. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-23-2020, 08:11 AM	#6
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	Re: Wanted truck rally trim rings Pics of the last three trim rings I have. Two are polished stainless and one is brushed finish stainless. Nice 10' driver quality with some minor scuffing or dings. Side by side pair are polished, lower trim ring brushed finish. No big dents and hard curbed edges. Hard to show condition with stainless and chrome. All I have right now, $10 each plus shipping. Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-23-2020, 08:18 AM	#7
a1vintage69 Senior Member Join Date: Apr 2015 Location: Redding, Ca. Posts: 4,031	Re: Wanted truck rally trim rings thanks Ironhorse, I am headed out to look at some today locally .

05-23-2020, 08:23 AM	#8
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	Re: Wanted truck rally trim rings Not a problem, let me know if have an interest. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-23-2020, 09:50 AM	#9
John H. Registered User Join Date: Oct 2007 Location: Sammamish, WA Posts: 2,115	Re: Wanted truck rally trim rings You may look into these. I asked and they do have a stem slot. They look to have the GM style holders. https://www.ebay.com/itm/15-NOS-CHEV...112133686435ui

05-25-2020, 06:51 PM	#11
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	Re: Wanted truck rally trim rings a1, any interest in the 3'' rings I have? Not show but nice driver 10 footers and original GM. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-25-2020, 09:09 PM	#14
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,339	Re: Wanted truck rally trim rings Trim rings SOLD to a1vintage69. PM sent with payment info. Thanks, __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

05-25-2020, 09:43 PM	#15
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,172	Re: Wanted truck rally trim rings Did you find all 4?

05-26-2020, 04:58 PM	#20
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,172	Re: Wanted truck rally trim rings Pics Attached Images

05-26-2020, 05:01 PM	#21
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,172	Re: Wanted truck rally trim rings Few more Attached Images

05-26-2020, 07:58 PM	#22
a1vintage69 Senior Member Join Date: Apr 2015 Location: Redding, Ca. Posts: 4,031	Re: Wanted truck rally trim rings Carl, those are good for a driver rig. how much do you want? send me a pm. thanks, a1

05-26-2020, 09:01 PM	#23
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,172	Re: Wanted truck rally trim rings Sent you a PM, the two best ones are pictured. The third isn't any good



Register or Log In To remove these advertisements.

05-27-2020, 02:13 PM	#24
CarlsLQ9SS Senior Member Join Date: Aug 2018 Location: London, Ky Posts: 1,172	Re: Wanted truck rally trim rings Tracking number. Attached Images

Register or Log In To remove these advertisements.