1960 GMC 1000 Motor Swap - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 06-11-2020, 09:28 PM

There are no aftermarket engine mounts available for the '60-'62 frames. The factory side mounts for a small block are extremely rare. What does work are the engine mount brackets for the '67-'72 with a small block. Those will work with a 1/4" thick spacer on top of the frame. There are no aftermarket trans crossmembers either for the '60-'62 frames. I am currently working on reproducing the factory auto trans crossmembers for the '60-'62 short wheelbase frames, but I don't think it will work with a 700R4 unless you move the engine forward to compensate for the difference between a PG/TH350 and the 700R4.

06-11-2020, 09:28 PM	#4
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,255	Re: 1960 GMC 1000 Motor Swap There are no aftermarket engine mounts available for the '60-'62 frames. The factory side mounts for a small block are extremely rare. What does work are the engine mount brackets for the '67-'72 with a small block. Those will work with a 1/4" thick spacer on top of the frame. There are no aftermarket trans crossmembers either for the '60-'62 frames. I am currently working on reproducing the factory auto trans crossmembers for the '60-'62 short wheelbase frames, but I don't think it will work with a 700R4 unless you move the engine forward to compensate for the difference between a PG/TH350 and the 700R4. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.