What do stock master cylinder brake lines look like

[JPBrecheisen]

Originally Posted by drumyn61

This is my balance bar but does the main cable attach to a bracket somewhere between the handle and the balance bar?

Main cable attaches to frame in 2 locations.

1. Rear most flange of left forward can mount.
2. Top of t-case cross member.

Hard to get pictures but hopefully these provide enough detail.

[drumyn61]

Originally Posted by JPBrecheisen

Main cable attaches to frame in 2 locations.

1. Rear most flange of left forward can mount.
2. Top of t-case cross member.

Hard to get pictures but hopefully these provide enough detail.

You are such a big help, thank you.

Do you have a picture of 4x4 shifter boots?

[JPBrecheisen]

Originally Posted by drumyn61

You are such a big help, thank you.

Do you have a picture of 4x4 shifter boots?

Mine are not stock.

I use the 67 amd later design for the transmissions and am still working on fitting a permanent solution for the t-case.

Sorry, not much help on that one.