|
Register or Log In To remove these advertisements. |
|
|
|
|||||||
 |
|
|
Thread Tools | Display Modes |
|
|
12-31-2021, 10:59 AM
|
#1 |
|
Registered User
 
Join Date: Dec 2014
Location: Loveland, CO
Posts: 179
|
Re: Measurement PLEASE. K10 cab bushing height
Also, I haven’t measured floor to mounts or cab brace yet. My bolts may be loose which may cause these measurements to be slightly off.
Roger
__________________
1971 K10 short bed step side, 5.3/th350/205, 3.73 gears |
|
|
|
12-31-2021, 12:27 PM
|
#2 |
|
Registered User
Join Date: Mar 2016
Location: hickory, ky
Posts: 1,353
|
Re: Measurement PLEASE. K10 cab bushing height
Thank you sir. My cab mounts are in the correct place so no further measurements required. I assume that after replacing your bushings with these, you are happy with cab to bed alignment. Otherwise, you would be like me searching for the right height. I will cut spacers to that height and slip them in to see if I do in fact have a problem. Seeing the 2 5/8 measurement on the back gives me hope.
__________________
:My build thread http://67-72chevytrucks.com/vboard/s...d.php?t=807535 1972 K10 swb/1968 Camaro 350/4spd 1955 210 2 dr sedan/1998 RCSB Z71/1977 Jeep CJ5 |
|
|
|
|
12-31-2021, 12:30 PM
|
#3 |
|
Registered User
Join Date: Dec 2014
Location: Loveland, CO
Posts: 179
|
Re: Measurement PLEASE. K10 cab bushing height
Yes sir, cab sits nice and no movement when I work on it. I may tighten down a turn or two still. Glad I could help.
__________________
1971 K10 short bed step side, 5.3/th350/205, 3.73 gears |
|
|
|
|
| Bookmarks |
|
|
Hybrid Mode
