Frame question

[purple gas]

Can you not put lighter suspension parts ( 1/2 ton or 3/4 ton front crossmemeber & springs and smaller leaves on the back )on to get a better ride?

[C-cab23]

Originally Posted by purple gas

Can you not put lighter suspension parts ( 1/2 ton or 3/4 ton front crossmemeber & springs and smaller leaves on the back )on to get a better ride?

I am not sure but I don't think the lighter duty parts will fit. I think the 1 ton frame is taller.

[kwmech]

The 1 ton frames are entirely different in the rear. Leaf spring spacing is different along with the width of the frame, and you are correct the frame beams are taller. What wheel base is the 1 ton?

[C-cab23]

Originally Posted by kwmech

The 1 ton frames are entirely different in the rear. Leaf spring spacing is different along with the width of the frame, and you are correct the frame beams are taller. What wheel base is the 1 ton?

It has a 133" wheelbase

[kwmech]

Lot of work to lengthen a frame only 6''. You'll then have to drill different mounting holes in the bed to the frame as they will be in a different place (width wise)

[kwmech]

Originally Posted by C-cab23

I am not sure but I don't think the lighter duty parts will fit. I think the 1 ton frame is taller.

You can accomplish this, being as it would be easier than stretching a different frame and swapping everything over. OR just find a different truck altogether and sell this one to somebody that needs an older 1 ton

[jumpsoffrock]

Originally Posted by kwmech

OR just find a different truck altogether and sell this one to somebody that needs an older 1 ton

I also say you just find another truck. I got very lucky and found my 1-ton pickup after only a month, but had to trailer it 400 miles home. My point is some people like these HD pickups.
These 1 ton pickups supposedly aren't rare, but I don't exactly see them growing on trees; save this truck for someone who needs it or save it for another time for yourself.

......then again who's to say the next person to own the truck won't just lay down the cash and promptly say, "yep I'm gonna cut 'er up and make 'er one of them shortened slammed restomods...."

[kwmech]

Originally Posted by jumpsoffrock

I also say you just find another truck. I got very lucky and found my 1-ton pickup after only a month, but had to trailer it 400 miles home. My point is some people like these HD pickups.
These 1 ton pickups supposedly aren't rare, but I don't exactly see them growing on trees; save this truck for someone who needs it or save it for another time for yourself.

......then again who's to say the next person to own the truck won't just lay down the cash and promptly say, "yep I'm gonna cut 'er up and make 'er one of them shortened slammed restomods...."

Why the attitude?? I know where there is a 1/2 ton truck stripped out for about 200.00

[jumpsoffrock]

Originally Posted by kwmech

Why the attitude?? I know where there is a 1/2 ton truck stripped out for about 200.00

We're starting to rant off topic here, but most of that statement was half hearted sarcasm. In reality there are still plenty of these trucks left for everyone, plenty left to be plundered if so desired.

[kwmech]

No, you started the rant. I was giving him an option then you stepped in with nothing. Take it somewhere else.

Adding to a frame is A LOT of work if done the right way. I've done it several times.