1971 K10 Stepside - Getting a Roller Roadworthy

[pjmoreland]

I disassembled the front hubs today with the intention of replacing the bearings and seals. Unfortunately, one of the hubs needs to be replaced because at some point a bearing spun in it and wore a groove. I have a lead on a replacement.

I did go ahead with installation of the axle shafts, spindles and dust shields. I also installed new axle vent hoses and vent caps. Filled the differentials with fluid. Also worked on a large crease in the passenger side front fender and adjusted the hood so that it latches now.