1971 K10 Stepside - Getting a Roller Roadworthy

['68OrangeSunshine]

Pat, Was your '71 K/10 Stepside originally an Air Force truck? The darker metallic blue suggests that to me. But internet colors get distorted.

[pjmoreland]

Originally Posted by '68OrangeSunshine

Pat, Was your '71 K/10 Stepside originally an Air Force truck? The darker metallic blue suggests that to me. But internet colors get distorted.

Unfortunately I know next to nothing about the history of this truck. The original paint was dark olive, and now it's covered in gray primer. One bed fender and the interior are still green.

['68OrangeSunshine]

Originally Posted by pjmoreland

Unfortunately I know next to nothing about the history of this truck. The original paint was dark olive, and now it's covered in gray primer. One bed fender and the interior are still green.

Quick reply! I was about to edit, since I backtracked and pulled up the SPID. Whie the OEM color was Olive, the SPID looks commercial, as Gov't trucks had a government property placque rivited inside the Glove Box and often no SPID.
And the Air Force never ''borrows'' trucks from the Army.
[Only the Marine Corps has a 'tradition' of assimilating vehicles from other branches -- usually when they ain't looking.]

[pjmoreland]

Originally Posted by '68OrangeSunshine

Quick reply! I was about to edit, since I backtracked and pulled up the SPID. Whie the OEM color was Olive, the SPID looks commercial, as Gov't trucks had a government property placque rivited inside the Glove Box and often no SPID.
And the Air Force never ''borrows'' trucks from the Army.
[Only the Marine Corps has a 'tradition' of assimilating vehicles from other branches -- usually when they ain't looking.]

Interesting stuff. I've seen a few retired military 67-72 trucks for sale on eBay. Mime is definitely commercial.

[pjmoreland]

I disassembled the front hubs today with the intention of replacing the bearings and seals. Unfortunately, one of the hubs needs to be replaced because at some point a bearing spun in it and wore a groove. I have a lead on a replacement.

I did go ahead with installation of the axle shafts, spindles and dust shields. I also installed new axle vent hoses and vent caps. Filled the differentials with fluid. Also worked on a large crease in the passenger side front fender and adjusted the hood so that it latches now.

[pjmoreland]

Here's the hub that got damaged by a spun bearing.

[pjmoreland]

More photos