1971 K10 Stepside - Getting a Roller Roadworthy

[pjmoreland]

Reconditioned the tail light housings today. Both mounting studs were broken on one of them. So I replaced them with screws and jam nuts. Put some RTV under the nuts to hopefully keep water out. There was a random wire spliced into the black wire on both sides, so I removed them and repaired the wires.

The replacement driver side inner fender I got didn't have the square nut for securing the parking brake cable so I transferred it over from the original inner fender.

I started cleaning up the driver side inner fender with a wire wheel, but it started raining again, so I still need to do the underside.