72 GMC Hump

[PbFut]

Am I misidentifying the hump in my 1972 GMC C25?
I was going to take advantage of the Black Friday sales and order up some parts needed to finish up the fire damage. I started looking for carpet and ACC is not showing an option for a low hump on a 72 GMC. I am 99% sure it's their data base but Rock auto also did not have the low hump option for a 72 GMC. Stock Interiors does show the option on their site for their carpet.
A search seems to show a strong lean to ACC product so I think I will go that direction and order using the Chevy selection.
Can someone confirm this is low hump before I drop a few hundred on the wrong cut?

[LS short box]

Pic of my 68 C10 with a high hump.

[72c20customcamper]

Aren’t all high humps bolted in as apposed to welded . So I would say low hump

[72c20customcamper]

Rockauto has a low hump listed for your truck . They just don’t list the turbo 350 .
https://www.rockauto.com/en/catalog/...,flooring,1264

[CAMAROBOY68SS]

Originally Posted by 72c20customcamper

Aren’t all high humps bolted in as apposed to welded . So I would say low hump

Yeah all high humps are bolted in 67-72. Low Humps are intergrated into the floor pan in 1 piece, its not welded in. Or you could be like me that started with a high hump 4 speed cab and bought a low hump section and reworked it to be a bolt in low hump.

OP has a low hump floor. On ACC select either 3spd manual trans or Auto trans and that is a 2WD, that would be a low hump carpet set.

[PbFut]

Manual trans will have hole in carpet for shifter. Auto 400 is high hump. On the ACC site there is a third option for Chevy and other years, simply Auto for a low hump and no hole as far as I can tell.

[pjmoreland]

I don't think a manual carpet would come with the shifter hole pre-cut in it. They leave that for you to do.

[72c20customcamper]

Originally Posted by PbFut

Manual trans will have hole in carpet for shifter. Auto 400 is high hump. On the ACC site there is a third option for Chevy and other years, simply Auto for a low hump and no hole as far as I can tell.

Nope . I had to cut the hole for the shifter on my 68its just a high hump carpet for either 4 spd or auto . ACC does not have a 350 listed only the 400 with either high or low hump . OP just needs to order the low hump like I posted