3 on tree shift linkage bushings search

[data89]

1969 C10 step side. I'm looking for the shift bushings where they connect down by the transmission. Without removing them to match up to pictures, all my searches on the many parts sites seem to show different. Does anyone have good pictures of the bushings, or part numbers so I can order with confidence?

[54blackhornet]

I bought those from my local gm dealer about ten years ago. I bought a few extras and gave them to a guy on this site. Hopefully someone else has a few extras lying around. When I installed them it made an incredible difference in shifting. Good luck !

[Classic Bowties]

data69, if LockDoc is unable to assist or supply you with the requested parts, we have added both the upper and lower GM NOS shift linkage grommets to our below linked long running steering column parts board f/s thread in post reply #70, we have given you first option/right of refusal on the diagram #2/GM NOS lower control rod to 3 spd. manual transmission shift lever grommets due to having a limited quantity on hand. Have a look and confirm in thread if interested. Mel


GM NOS Upper control rod to column (auto & man.) shift tube grommets, item #1 on below parts diagram.
***If needed, add a matching GM NOS inner steel shift bushing to the above shift tube grommet***

GM NOS Lower control rod to 3 spd. manual trans shift lever grommets, item #2 on below parts diagram


http://67-72chevytrucks.com/vboard/s...=838093&page=3

.

[data89]

Originally Posted by Classic Bowties

data69, if LockDoc is unable to assist or supply you with the requested parts, we have added both the upper and lower GM NOS shift linkage grommets to our below linked long running steering column parts board f/s thread in post reply #70, we have given you first option/right of refusal on the diagram #2/GM NOS lower control rod to 3 spd. manual transmission shift lever grommets due to having a limited quantity on hand. Have a look and confirm in thread if interested. Mel


GM NOS Upper control rod to column (auto & man.) shift tube grommets, item #1 on below parts diagram.
***If needed, add a matching GM NOS inner steel shift bushing to the above shift tube grommet***

GM NOS Lower control rod to 3 spd. manual trans shift lever grommets, item #2 on below parts diagram


http://67-72chevytrucks.com/vboard/s...=838093&page=3

.

Okay, thanks...I'll crawl under and take another look to see if these could be what it takes, (cold in the shop now, but hopefully tomorrow). It was 10 below and takes awhile for the stove to heat it up.

[Orange Crate]

Ha, it is really cold up north there! I'm in Beloit so its much warmer only -9f last night, pretty warm right now at 21f. Almost shorts and a tee shirt weather!

[Classic Bowties]

Here are some pics of the mentioned (above post #3) optional add on GM NOS upper control rod to column shift tube inner steel bushing spacers for the #1/shift tube rubber grommets. Mel
.