Looking for quality replacement mirrors that dont vibrate - The 1947 - Present Chevrolet & GMC Truck Message Board Network

May70 · 01-17-2026, 08:22 PM

Hey folks,

Looking for quality replacement mirrors that aren't going to surface rust or vibrate.

Im looking for a larger mirror aprox 5x7. Not going with the small rounds or the tripod mounts.

Anyone know of some?

Sicklajoie · 01-17-2026, 09:25 PM

I ran something similar to this which still vibrated a lot, but ran a rubber isolated round blind spot mirror inside of it that was very clear.

**basketcase** · 01-17-2026, 10:04 PM

I have a pair of mirror heads just like in the set above that I'm going to use on the stock arms. I'm sure they will vibrate from wind buffeting.

Hidesertchevy · 01-17-2026, 10:55 PM

Check out mike billet mirrors. Very nice mirrors that work!

**basketcase** · 01-18-2026, 01:00 AM

Those are nice. I didn't know anyone even made a custom arm for the 67-69.

toms68cst · 01-18-2026, 02:21 PM

I bought a pair of these from Classic Industries for my base stock arms. They're not stock looking but at least I can see where I've been. They seem like pretty good quality.

CX1147 ea 47-72 TRK OUTR MIR HD STNLSS 2 2 $18.99 $37.98

May70 · 01-18-2026, 07:52 PM

Quote:

Originally Posted by Hidesertchevy

Check out mike billet mirrors. Very nice mirrors that work!

Do you have a pair of his mirrors? Which ones did you go with?

Do you get any vibrating while driving?

HO455 · 01-19-2026, 01:21 AM

I replaced the mirrors the mirrors on my Burban with ones from NAPA. I believe the old ones were from LMC. The PO installed them. One of the benefits of the NAPA replacements is much reduced vibrations. Go to post 831 in the link.

https://67-72chevytrucks.com/vboard/...irrors&page=34

In the first photo shows the old mirror on the left and the NAPA one on the right. The one on the left is a pretty common aftermarket mirror.

I would recommend not using the supplied bolt as it will rust up fairly quick. The other thing is the factory mirrors used a 1/4-20 and the NAPA one uses 5/16-18 bolts.

**WorldsCrappiestTruck** · 01-19-2026, 06:43 AM

They’re a little big but are somewhat period-correct

Search on eBay for “Roberk mirrors”

There are a lot of old vintage styles that come up.

01-17-2026, 08:22 PM	#1
May70 Registered User Join Date: Jan 2019 Location: Hampton Roads VA Posts: 663	Looking for quality replacement mirrors that dont vibrate Hey folks, Looking for quality replacement mirrors that aren't going to surface rust or vibrate. Im looking for a larger mirror aprox 5x7. Not going with the small rounds or the tripod mounts. Anyone know of some? __________________ 70 C20 Build link : Project Montezuma http://67-72chevytrucks.com/vboard/s...d.php?t=794479 How to repair that rusted out 67-72 c10-c30! Please subscribe! https://www.youtube.com/c/MaycoCustomRestorations

01-17-2026, 09:25 PM	#2
Sicklajoie The Niner Join Date: Nov 2010 Location: Broad Brook, CT Posts: 2,589	Re: Looking for quality replacement mirrors that dont vibrate I ran something similar to this which still vibrated a lot, but ran a rubber isolated round blind spot mirror inside of it that was very clear. Attached Images __________________ "A good racer is one whose head is in communication with his balls." - Richie Evans 1970 C/20 - 402/TH400/3.54s - 74K miles 2003 GMC Sierra 2500 - Wheatland Yellow Niner Progression Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=697183 Classic Trucks article: https://www.motortrend.com/features/...et-c20-driven/

01-17-2026, 10:04 PM	#3
basketcase Senior Member Join Date: Oct 2001 Location: Edgerton OH USA Posts: 687	Re: Looking for quality replacement mirrors that dont vibrate I have a pair of mirror heads just like in the set above that I'm going to use on the stock arms. I'm sure they will vibrate from wind buffeting. __________________ '69 swb stepside in progress. '59 Corvette lifetime project

01-17-2026, 10:55 PM	#4
Hidesertchevy Registered User Join Date: Mar 2017 Location: yucca valley Posts: 318	Re: Looking for quality replacement mirrors that dont vibrate Check out mike billet mirrors. Very nice mirrors that work!

01-18-2026, 01:00 AM	#5
basketcase Senior Member Join Date: Oct 2001 Location: Edgerton OH USA Posts: 687	Re: Looking for quality replacement mirrors that dont vibrate Those are nice. I didn't know anyone even made a custom arm for the 67-69. __________________ '69 swb stepside in progress. '59 Corvette lifetime project

01-18-2026, 02:21 PM	#6
toms68cst Registered User Join Date: Jun 2000 Location: Spearfish, SD Posts: 4,331	Re: Looking for quality replacement mirrors that dont vibrate I bought a pair of these from Classic Industries for my base stock arms. They're not stock looking but at least I can see where I've been. They seem like pretty good quality. CX1147 ea 47-72 TRK OUTR MIR HD STNLSS 2 2 $18.99 $37.98 __________________ Unrestored 68 C-10 CST. Original 327. 4-Speed CH465. 50k or so miles. TREASURER, Drum Brake Club.

01-19-2026, 01:21 AM	#8
HO455 Registered User Join Date: Feb 2016 Location: Portland Oregon Posts: 12,410	Re: Looking for quality replacement mirrors that dont vibrate I replaced the mirrors the mirrors on my Burban with ones from NAPA. I believe the old ones were from LMC. The PO installed them. One of the benefits of the NAPA replacements is much reduced vibrations. Go to post 831 in the link. https://67-72chevytrucks.com/vboard/...irrors&page=34 In the first photo shows the old mirror on the left and the NAPA one on the right. The one on the left is a pretty common aftermarket mirror. I would recommend not using the supplied bolt as it will rust up fairly quick. The other thing is the factory mirrors used a 1/4-20 and the NAPA one uses 5/16-18 bolts. Attached Images __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377

01-19-2026, 06:43 AM	#9
WorldsCrappiestTruck Senior Member Join Date: Mar 2022 Location: Hinesburg Vermont Posts: 350	Re: Looking for quality replacement mirrors that dont vibrate They’re a little big but are somewhat period-correct Search on eBay for “Roberk mirrors” There are a lot of old vintage styles that come up. Attached Images



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.