How many 2 wheel drive blazers do we have? - Page 18 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

babyblueoval · 02-06-2012, 08:47 AM

Quote:

Originally Posted by KevsClassics

Here you go.
From Last years CPP Open house

Very nice. Are those new seats in there? No more highbacks? I like it.

RustyBucket · 02-06-2012, 09:30 AM

Thanks Topfuel, all of the ones I've seen are black plastic and too BIG to fit in there. The fill pipe is pretty close to the inside of the quarter panel. The side marker opening is only big enough for my thumb, pointer and diddlin' finger. The bright stainless cap sticking out of the top of the fender on the Jimmy is more appealing every time I gas the Blazer.

PHAT TONY · 02-06-2012, 01:18 PM

I used a weld in custom bike tank filler, screw on billet cap about 2-2 1/2" around.

jeffg1010 · 02-06-2012, 01:26 PM

That is AWESOME! Great job. What did you use for a hinge?

PHAT TONY · 02-06-2012, 03:00 PM

It's just a late '90s fard gas door cut up, I'd guess most anything could be made to work. It did take quite a few hours to get the light to seat just right, it's a total surprise to people who don't know I did this; the light sits perfect when closed.

Topfuelflat · 02-06-2012, 03:02 PM

Quote:

Originally Posted by KevsClassics

Here you go.
From Last years CPP Open house

Wow what an impressive ride, you should be very proud. Any chance of seeing pics of the interior.

greens69 · 02-06-2012, 04:55 PM

Quote:

Originally Posted by KevsClassics

Here you go.
From Last years CPP Open house

I love looking at pictures of your blazer!! very nice!!

**KevsClassics** · 02-07-2012, 01:55 AM

Quote:

Originally Posted by babyblueoval

Very nice. Are those new seats in there? No more highbacks? I like it.

Thanks, Same seats. I just had them cut down. I never liked the high backs.

Quote:

Originally Posted by Topfuelflat

Wow what an impressive ride, you should be very proud. Any chance of seeing pics of the interior.

Thanks, These are the only pics I have of int. I will take better shots soon

Quote:

Originally Posted by greens69

I love looking at pictures of your blazer!! very nice!!

DITTO

denny5625 · 02-07-2012, 11:31 AM

Quote:

Originally Posted by KevsClassics

Thanks, Same seats. I just had them cut down. I never liked the high backs.

Thanks, These are the only pics I have of int. I will take better shots soon

DITTO

Very nice looking ride you have there. I hope mine looks half that good some day.

Topfuelflat · 02-08-2012, 09:56 PM

Quote:

Originally Posted by RustyBucket

The P.O. hid the fuel fill on my Blazer behind the side marker light. I have a '72 Jimmy with a stock filler. Both of 'em are kinda hard to put fuel in, they tend to splash back and shut the nozzle off. It's hard to wiggle the cap out from inside side marker light opening on the Blazer. I've been looking for one of those permanent gas caps that has the place in the center where you poke the nozzle in. It'd be a big improvement to swing the hinged side marker light open and just stick the nozzle in. I haven't found a cap small enough to fit inside the opening yet.

Hopefully this link works http://www.haganauto.com/category_s/43.htm.The filler wasnt as expensive as I remembered, it was only $50.00. I guess this info should probably be on a different thread. I'm taking a trip down to the Sacramento Roadster show next week, are there any California Blazers attending.

PHAT TONY · 02-08-2012, 10:48 PM

Quote:

Originally Posted by KevsClassics

Thanks, Same seats. I just had them cut down. I never liked the high backs.

Thanks, These are the only pics I have of int. I will take better shots soon

DITTO

I love the look of a rear roll pan on a Blazer bum, but I can't bring myself to cut the rear frame to do it!

jeffg1010 · 02-08-2012, 11:02 PM

Quote:

Originally Posted by KevsClassics

Thanks, Same seats. I just had them cut down. I never liked the high backs.

Thanks, These are the only pics I have of int. I will take better shots soon

DITTO

You don't by any chance have a hitch tucked up under that license do you?

I'd like to have a hidden hitch on mine, but I havent seen anyone do it with a rollpan.

Topfuelflat · 02-09-2012, 12:05 AM

Quote:

Originally Posted by KevsClassics

Here you go.
From Last years CPP Open house

Everything about your blazer is top knotch. The interior is super clean. I really like how you made the glove box match the dash panel, I've never seen that before, hope you dont mind if I borrow that idea for mine.

RustyBucket · 02-09-2012, 12:17 AM

Thanks AGAIN Topfuel, sure wish I could achieve this without having to graft another end onto the filler neck... maybe modify one of the caps from the link you provided.
Regarding the roll pan rear, I like 'em both ways. The P.O. installed the roll pan. He'd cut the frame clean with a sawzall and gave me the pieces when I bought it. Guess I could tack 'em back on and buy a bumper...

**KevsClassics** · 02-09-2012, 12:40 AM

Quote:

Originally Posted by denny5625

Very nice looking ride you have there. I hope mine looks half that good some day.

Thank you.

Quote:

Originally Posted by PHAT TONY

I love the look of a rear roll pan on a Blazer bum, but I can't bring myself to cut the rear frame to do it!

I would prefer a bumper. But roll pan was on when I bought it.

Quote:

Originally Posted by jeffg1010

You don't by any chance have a hitch tucked up under that license do you?

I'd like to have a hidden hitch on mine, but I havent seen anyone do it with a rollpan.

It can be done. There was a hidden hitch but I took it off cause I will never tow anything

Quote:

Originally Posted by Topfuelflat

Everything about your blazer is top knotch. The interior is super clean. I really like how you made the glove box match the dash panel, I've never seen that before, hope you dont mind if I borrow that idea for mine.

Thank you very much for the compliment. Glad you like the glove box idea. I don't mind at all. That's what great about this forum we can all share different ideas with each other

JOHNORO · 02-09-2012, 01:38 AM

Quote:

Originally Posted by KevsClassics

Here you go.
From Last years CPP Open house

Quote:

Originally Posted by dialric

I purchased this 1970 2wd blazer from a board member who did an awesome job. I want to clear the air. I am not claiming to have build it. I had it for sale on another site and just got overwelmed with emails and really misspoked myself. AMP is responsible for the build. I hope this will resolve my stupid mistake.

DIALRIC,
I am digging that rail on the bedside of your blazer

Kevin,
as much as an attention whore you know my Blazer is how could I have
missed this Thread ?

**KevsClassics** · 02-09-2012, 02:12 AM

Quote:

Originally Posted by JOHNORO

Kevin,
as much as an attention whore you know my Blazer is how could I have
missed this Thread ?

John where you been?

I can't believe you never posted that beauty on this thread before.

jeffg1010 · 02-09-2012, 10:11 AM

Quote:

Originally Posted by RustyBucket

Guess I could tack 'em back on and buy a bumper...

Nah... keep it that way. I love that Blazer! I like it without the roadster pods too.

RustyBucket · 02-09-2012, 03:15 PM

I've been mad at 'ol "JIMMY FOUR EYES" since my air ratchet smacked me in the mouth while I was putting the new bumper on. My lip healed up... can't stay mad too long. I had a better looking grille and headlight trim. His face scrubbed up pretty good. I think he's a "wannabe" 4wd.--- stock height susp., roll bar, and a spare tire carrier.

LadyBird · 02-09-2012, 09:28 PM

I'm addicted to this thread. Who want's to trade for my '70 stepside?? lol

babyblueoval · 02-09-2012, 09:38 PM

Ok, I've been on this forum for so long I figured I could at least show that I have made some progress. Granted not a whole lot, but some.

Can you say gutted? doors are on cause we didn't have any metal to seld into the door openings. I absolutely could not get the ingition switch out. grrrr

my Redneck lift (or would that be lifts since there's technically more than one?)

4x2 frame sitting next to the former 4x4 frame (it has since been shortened but I don't have that pic available)

PHAT TONY · 02-09-2012, 10:08 PM

Quote:

Originally Posted by RustyBucket

Thanks AGAIN Topfuel, sure wish I could achieve this without having to graft another end onto the filler neck... maybe modify one of the caps from the link you provided.
Regarding the roll pan rear, I like 'em both ways. The P.O. installed the roll pan. He'd cut the frame clean with a sawzall and gave me the pieces when I bought it. Guess I could tack 'em back on and buy a bumper...

Everytime I see a pic of this thing I like it a little more!!

jeffg1010 · 02-09-2012, 10:55 PM

[QUOTE=babyblueoval;5177927]Ok, I've been on this forum for so long I figured I could at least show that I have made some progress. Granted not a whole lot, but some.

Can you say gutted? doors are on cause we didn't have any metal to seld into the door openings. I absolutely could not get the ingition switch out. grrrr

QUOTE]

OK... off topic, but is that an S10 with a late 70's Mustang front end in the background?!?

babyblueoval · 02-09-2012, 10:59 PM

[QUOTE=jeffg1010;5178133OK... off topic, but is that an S10 with a late 70's Mustang front end in the background?!?[/QUOTE]

ROFL.....

I forgot all about that thing being in that pic. YES. Yes, that is in fact an S10 with a Mustang front end. That's at my friends shop. He was doing some work on it but can't remember what. (no, not putting the s10 front end back on) My friend said the guy likes to be different and really likes it. It takes all kinds.

JOHNORO · 02-10-2012, 01:08 AM

Quote:

Originally Posted by way2lo2

I have a 71 and 72, the 71 I think is sold and the 72 is near completion.

This is the Blazer that did it for me...
I remember thinking man someday I would love to have something that nice !

Quote:

Originally Posted by denny5625

Here's mine.

I like the roadster look on yours denny5625

Quote:

Originally Posted by KevsClassics

Here you go.
From Last years CPP Open house

And Kevin when my Blazer grows up it wants to be like yours

02-06-2012, 09:30 AM	#427
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,050	Re: How many 2 wheel drive blazers do we have? Thanks Topfuel, all of the ones I've seen are black plastic and too BIG to fit in there. The fill pipe is pretty close to the inside of the quarter panel. The side marker opening is only big enough for my thumb, pointer and diddlin' finger. The bright stainless cap sticking out of the top of the fender on the Jimmy is more appealing every time I gas the Blazer. __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!

02-06-2012, 01:18 PM	#428
PHAT TONY Registered User Join Date: Aug 2008 Location: Red Deer ab canada Posts: 1,250	Re: How many 2 wheel drive blazers do we have? I used a weld in custom bike tank filler, screw on billet cap about 2-2 1/2" around. Attached Images __________________ 1972 factory 2 Wheel Drive Blazer-Sold 1972 K10 4X4-Sold 1971 Chevrolet Cheyenne/10-Sold 1970 Chevrolet C/10-Sold 1968 GMC 4X4-Project 1968 Chevrolet C/10 Pro Street 1970 GMC 3/4 Ton-Parts 1997 2WD 2DR Yukon-Sweet http://67-72chevytrucks.com/vboard/s...d.php?t=335664

02-06-2012, 01:26 PM	#429
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,677	Re: How many 2 wheel drive blazers do we have? That is AWESOME! Great job. What did you use for a hinge? __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

02-06-2012, 03:00 PM	#430
PHAT TONY Registered User Join Date: Aug 2008 Location: Red Deer ab canada Posts: 1,250	Re: How many 2 wheel drive blazers do we have? It's just a late '90s fard gas door cut up, I'd guess most anything could be made to work. It did take quite a few hours to get the light to seat just right, it's a total surprise to people who don't know I did this; the light sits perfect when closed. __________________ 1972 factory 2 Wheel Drive Blazer-Sold 1972 K10 4X4-Sold 1971 Chevrolet Cheyenne/10-Sold 1970 Chevrolet C/10-Sold 1968 GMC 4X4-Project 1968 Chevrolet C/10 Pro Street 1970 GMC 3/4 Ton-Parts 1997 2WD 2DR Yukon-Sweet http://67-72chevytrucks.com/vboard/s...d.php?t=335664

02-09-2012, 12:17 AM	#439
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,050	Re: How many 2 wheel drive blazers do we have? Thanks AGAIN Topfuel, sure wish I could achieve this without having to graft another end onto the filler neck... maybe modify one of the caps from the link you provided. Regarding the roll pan rear, I like 'em both ways. The P.O. installed the roll pan. He'd cut the frame clean with a sawzall and gave me the pieces when I bought it. Guess I could tack 'em back on and buy a bumper... Attached Images __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!

02-09-2012, 03:15 PM	#444
RustyBucket Registered User Join Date: Jul 2009 Location: Space Coast, Fl. Posts: 1,050	Re: How many 2 wheel drive blazers do we have? I've been mad at 'ol "JIMMY FOUR EYES" since my air ratchet smacked me in the mouth while I was putting the new bumper on. My lip healed up... can't stay mad too long. I had a better looking grille and headlight trim. His face scrubbed up pretty good. I think he's a "wannabe" 4wd.--- stock height susp., roll bar, and a spare tire carrier. Attached Images __________________ Dad always said, "Son, WISH IN ONE HAND, and ......." -------------------------------------- -------------------------------------- Current toy trucks: '71 GMC 1500 SUPER CUSTOM short/step, orig. dk. blue, 350/700r, ps,pb, A/C '72 Blazer 2wd, ochre & white, 454, tremecTKO 500 5spd. ps, pb, A/C, tilt Last 10yrs of hobby vehicles, had a FEW more in the 50yrs. before these: '66 Plymouth Belvedere City of Miami cop car clone. '70 Nova 406"sb, 13.5-1, solid roller, Brodix, p.glide/t.brake, back halved, 9" Ford, spool 4.88, cage,ladder bar/coilover, 10.5 tire....... SOLD!! '67 C10 short/step side mount spare -- SOLD!! '72 Jimmy 2wd, 350/350, ps, pb, fun driver, lots of bondo & a shiny red paint job..... SOLD!! '69 Nova 350, 4spd, A/C, ps, p.b, ...SOLD!!

02-09-2012, 09:28 PM	#445
LadyBird Registered User Join Date: Feb 2011 Location: Denver, Co Posts: 37	Re: How many 2 wheel drive blazers do we have? I'm addicted to this thread. Who want's to trade for my '70 stepside?? lol

02-09-2012, 09:38 PM	#446
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: How many 2 wheel drive blazers do we have? Ok, I've been on this forum for so long I figured I could at least show that I have made some progress. Granted not a whole lot, but some. Can you say gutted? doors are on cause we didn't have any metal to seld into the door openings. I absolutely could not get the ingition switch out. grrrr my Redneck lift (or would that be lifts since there's technically more than one?) 4x2 frame sitting next to the former 4x4 frame (it has since been shortened but I don't have that pic available) __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver

02-09-2012, 10:55 PM	#448
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,677	Re: How many 2 wheel drive blazers do we have? [QUOTE=babyblueoval;5177927]Ok, I've been on this forum for so long I figured I could at least show that I have made some progress. Granted not a whole lot, but some. Can you say gutted? doors are on cause we didn't have any metal to seld into the door openings. I absolutely could not get the ingition switch out. grrrr QUOTE] OK... off topic, but is that an S10 with a late 70's Mustang front end in the background?!? __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

02-09-2012, 10:59 PM	#449
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: How many 2 wheel drive blazers do we have? [QUOTE=jeffg1010;5178133OK... off topic, but is that an S10 with a late 70's Mustang front end in the background?!?[/QUOTE] ROFL..... I forgot all about that thing being in that pic. YES. Yes, that is in fact an S10 with a Mustang front end. That's at my friends shop. He was doing some work on it but can't remember what. (no, not putting the s10 front end back on) My friend said the guy likes to be different and really likes it. It takes all kinds. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.