New exhaust w/6" drop pics - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

powell72 · 02-02-2006, 11:48 PM

If I remember, they're 1/4'' thick. Way more beefy than the originals.

Rollie396 · 02-03-2006, 12:50 AM

1/4"sounds more reasonable.Funny how the pics make it look heavier.

**gregfull** · 02-03-2006, 01:59 PM

Thanks see ten, I think I'm going to invest in one of those crossmembers...Heavy duty...

Oh BTW, very nice truck.

70c10 · 02-11-2006, 10:37 AM

see ten and rodsbyt- Nice jobs!!!!

**Hart_Rod** · 02-11-2006, 10:43 AM

See Ten -- if you get tired of messing with that "ole truck", I'll take it off your hands!

NO LONGER DISTURBED KONCEPTZ · 02-11-2006, 09:34 PM

Truck looks good and the exhaust is nice. I hope you like cleaning that bumper. Cause with the exhaust exiting out the back like that you will get black crap all over it after a while.

see ten · 02-11-2006, 09:44 PM

Quote:

Originally Posted by DISTURBED KONCEPTZ

Truck looks good and the exhaust is nice. I hope you like cleaning that bumper. Cause with the exhaust exiting out the back like that you will get black crap all over it after a while.

It has to come out somewhere my friend. My old exhaust came straight out where these are somewhat angled down. I previously noticed the soot on the tailgate but I haven't really noticed a problem with the angled exit. But hell if I drive it enough to get the back sooty the whole truck probably needs a bath anyway. Thanks for the compliment.

72MARIO · 02-12-2006, 09:09 AM

My exhaust comes out the side in front of the wheels. Heck by the time I get 10 minutes from home the back of the truck already has dust on the gate and bumper. These trucks need to get a bath every other day just like a office employee

jbon64 · 02-12-2006, 10:15 AM

see ten i'm not a big fan of red vehicles , but every time i see your truck i gotta re-think my "no red trucks " way of thinking . thumbs up all the way around my friend

JIMS1972STEPSIDE · 02-12-2006, 10:30 AM

Thanks for the new pics of your "SEE TEN" as I hope my pipe install comes out as nice as yours, BTW do you have headers as I am converting my C-10 to power steering and going from three on the tree to three on the floor before I put in the headers, (clearance problems) and will drop mine 3 inches up front and 5 inches in the rear and was able to pick up some AR 17 inch Torq Thrush II wheels ($600.00 for all four!) for it. Again nice job and a very nice truck!

see ten · 02-12-2006, 11:03 AM

Quote:

Originally Posted by JIMS1972STEPSIDE

Thanks for the new pics of your "SEE TEN" as I hope my pipe install comes out as nice as yours, BTW do you have headers as I am converting my C-10 to power steering and going from three on the tree to three on the floor before I put in the headers, (clearance problems) and will drop mine 3 inches up front and 5 inches in the rear and was able to pick up some AR 17 inch Torq Thrush II wheels ($600.00 for all four!) for it. Again nice job and a very nice truck!

Thanks for the compliment. No headers here my friend, the truck has stock manifolds.

NO LONGER DISTURBED KONCEPTZ · 02-12-2006, 11:20 AM

Quote:

Originally Posted by see ten

It has to come out somewhere my friend. My old exhaust came straight out where these are somewhat angled down. I previously noticed the soot on the tailgate but I haven't really noticed a problem with the angled exit. But hell if I drive it enough to get the back sooty the whole truck probably needs a bath anyway. Thanks for the compliment.

Well I like when it is just dumped before the rear end.

weasel29gm · 02-12-2006, 11:21 AM

Wow both trucks exhausts are great!!!!!!! Good job guys!!!!

FRENCHBLUE72 · 02-12-2006, 01:38 PM

Very nice rides guys almost identical trucks... SEETEN thanks for posting the pics of the crossmember....

**Hart_Rod** · 02-12-2006, 03:34 PM

Has anyone just cut out holes in the original crossmember? Thats what I'm thinking about doing to mine. If you've done it, please post pics.

Rob

72MARIO · 02-13-2006, 08:51 AM

Slammed67 and myself forsure have cut holes thru the existing crossmember. Just make them square if a plasma cutter is not avaible.

02-02-2006, 11:48 PM	#26
powell72 Senior Member Join Date: Jan 2005 Location: Loveland Co. Posts: 3,098	Re: New exhaust w/6" drop pics If I remember, they're 1/4'' thick. Way more beefy than the originals. __________________ Chris 74 Custom Deluxe SWB 350/350/3.73’s 99 2wd Silverado RCSB 5.3/4L60/3.90’s http://www.classictrucks.com/feature...short_bed.html

02-03-2006, 12:50 AM	#27
Rollie396 someday it will be done! Join Date: Sep 2004 Location: Lloydminster,AB. Canada Posts: 1,620	Re: New exhaust w/6" drop pics 1/4"sounds more reasonable.Funny how the pics make it look heavier. __________________ '72 C-10 Proud owner of a million new and used pieces that used to be and will once again be(god willing) a testament to the term "they don't build em like that anymore. '80 LWB 2wd beater '67 GMC long fleet (cab donor) '66 long step (parked till it's turn comes around) '65 short step (parts truck that will donate it's bed and possibly frame to the '66) '06 Grand Prix wife's car (she hardly lets me touch it) my pics

02-03-2006, 01:59 PM	#28
gregfull Registered User Join Date: Jan 2004 Location: Richmond, Texas Posts: 598	Re: New exhaust w/6" drop pics Thanks see ten, I think I'm going to invest in one of those crossmembers...Heavy duty... Oh BTW, very nice truck. __________________ My Suburban Project 72 Suburban 68 SWB 57 Belair 55 Cameo 06 Chevy 1/2 ton crew 09 Suburban

02-11-2006, 10:37 AM	#29
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,856	Re: New exhaust w/6" drop pics see ten and rodsbyt- Nice jobs!!!! __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

02-11-2006, 10:43 AM	#30
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: New exhaust w/6" drop pics See Ten -- if you get tired of messing with that "ole truck", I'll take it off your hands! __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-11-2006, 09:34 PM	#31
NO LONGER DISTURBED KONCEPTZ Registered User Join Date: Aug 2004 Posts: 257	Re: New exhaust w/6" drop pics Truck looks good and the exhaust is nice. I hope you like cleaning that bumper. Cause with the exhaust exiting out the back like that you will get black crap all over it after a while.

02-12-2006, 09:09 AM	#33
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Re: New exhaust w/6" drop pics My exhaust comes out the side in front of the wheels. Heck by the time I get 10 minutes from home the back of the truck already has dust on the gate and bumper. These trucks need to get a bath every other day just like a office employee __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD Last edited by 72MARIO; 02-12-2006 at 09:10 AM.

02-12-2006, 10:15 AM	#34
jbon64 Registered User Join Date: Jan 2006 Location: sidney , illinois Posts: 312	Re: New exhaust w/6" drop pics see ten i'm not a big fan of red vehicles , but every time i see your truck i gotta re-think my "no red trucks " way of thinking . thumbs up all the way around my friend __________________ hey.....smell my finger 64 nova wagon , 63 nova convertible

02-12-2006, 10:30 AM	#35
JIMS1972STEPSIDE Junior Member Join Date: Jan 2006 Location: SPARKS Posts: 62	Re: New exhaust w/6" drop pics Thanks for the new pics of your "SEE TEN" as I hope my pipe install comes out as nice as yours, BTW do you have headers as I am converting my C-10 to power steering and going from three on the tree to three on the floor before I put in the headers, (clearance problems) and will drop mine 3 inches up front and 5 inches in the rear and was able to pick up some AR 17 inch Torq Thrush II wheels ($600.00 for all four!) for it. Again nice job and a very nice truck!

02-12-2006, 11:21 AM	#38
weasel29gm SLOW BUT SURE,BUT CLOSER Join Date: Feb 2002 Location: eleanor wv usa Posts: 3,096	Re: New exhaust w/6" drop pics Wow both trucks exhausts are great!!!!!!! Good job guys!!!! __________________ 69 C-10, OWNED 38YRS... 350 over 30, 350 Turbo, 3:73 Posi P/S, P/B Black with red and black int. ''LOVE THESE OLD ''TRUCKS.......

02-12-2006, 01:38 PM	#39
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: New exhaust w/6" drop pics Very nice rides guys almost identical trucks... SEETEN thanks for posting the pics of the crossmember.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

02-12-2006, 03:34 PM	#40
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: New exhaust w/6" drop pics Has anyone just cut out holes in the original crossmember? Thats what I'm thinking about doing to mine. If you've done it, please post pics. Rob __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

02-13-2006, 08:51 AM	#41
72MARIO Registered User Join Date: Nov 2000 Location: Huntsville Ontario Canada Posts: 4,051	Re: New exhaust w/6" drop pics Slammed67 and myself forsure have cut holes thru the existing crossmember. Just make them square if a plasma cutter is not avaible. __________________ 1968 Suburban numbers matching all original truck now equipped with 6.0/4L80 on Accuair http://67-72chevytrucks.com/vboard/s...d.php?t=625017 1967 C/20 6.0/4L80 Roofing Truck 1990 V2500 Suburban "Plow Truck" 2005 TAHOE DD



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.