FL Un-needed parts - Page 2 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

LUCKTRUCK · 03-08-2010, 08:11 PM

hartrod, sorry I'm gonna pass on the linkage

**Hart_Rod** · 03-08-2010, 08:48 PM

Quote:

Originally Posted by 64GMCHorsepower

Rob, can you give me the measurments on the fans please....

Overall length or the diamter of the fans?

Quote:

Originally Posted by Southern C10

Rob,

Payment sent for grille.

Brian.

Thanks Brian!

Quote:

Originally Posted by LUCKTRUCK

hartrod, sorry I'm gonna pass on the linkage

No worries. Take care.

R/

64GMCHorsepower · 03-08-2010, 11:46 PM

overall length and height please on the fans please....

**Hart_Rod** · 03-08-2010, 11:51 PM

Quote:

Originally Posted by 64GMCHorsepower

overall length and height please on the fans please....

15 1/2" X 31"

I added more parts, nice ac control panel, 4 x 4 engine cradle, small block engine mounts....

Southern C10 · 03-09-2010, 12:26 AM

Rob,

Pics of the AC controls and 72 front fenders. Ill have to email Jason again

**Hart_Rod** · 03-09-2010, 01:16 AM

Quote:

Originally Posted by Southern C10

Rob,

Pics of the AC controls and 72 front fenders. Ill have to email Jason again

Here's some pictures of the a/c and the best pictures I have of the fenders. I can get more tomorrow. Drivers side is near perfect. The passenger side has some screw holes where a small dent was pulled. The only problem with these fenders is that the mounting tab for the inner fenders was cut off.

R/

Southern C10 · 03-09-2010, 05:04 AM

Quote:

Originally Posted by Hart_Rod

Here's some pictures of the a/c and the best pictures I have of the fenders. I can get more tomorrow. Drivers side is near perfect. The passenger side has some screw holes where a small dent was pulled. The only problem with these fenders is that the mounting tab for the inner fenders was cut off.

R/

Thanks Rob. My AC controls are about the same shape and my fenders need the same amount of work. Ill pass on both. Thanks again!!

**Hart_Rod** · 03-09-2010, 11:45 AM

Quote:

Originally Posted by BigRed Beast

Hi, Rob...

Exterior mirrors...I have a '72 Blazer CST. Doors were punched for the smaller, rectangular mirrors. But, I'd be happy with the smaller tripod mirrors too...whatcha got?

Dave

I found a set of CST sport mirrors with all brackets and gaskets.

Quote:

Originally Posted by 64GMCHorsepower

Rob, can you give me the measurments on the fans please....

Dimensions posted

Quote:

Originally Posted by Southern C10

Thanks Rob. My AC controls are about the same shape and my fenders need the same amount of work. Ill pass on both. Thanks again!!

PM sent for possible trade...

64GMCHorsepower · 03-09-2010, 05:43 PM

Thanks for the measurements Rob, the fans won't fit my radiator....

jmedero · 03-09-2010, 08:47 PM

did you get a manicure?.... lol
bump

quentin hill · 03-09-2010, 09:22 PM

do you still have the grill or is it gone?

**Hart_Rod** · 03-10-2010, 10:17 AM

Quote:

Originally Posted by 64GMCHorsepower

Thanks for the measurements Rob, the fans won't fit my radiator....

No worries.

Quote:

Originally Posted by jmedero

did you get a manicure?.... lol
bump

Glad you noticed,

.

Quote:

Originally Posted by quentin hill

do you still have the grill or is it gone?

It's sold. Thanks for asking.

BigRed Beast · 03-10-2010, 10:19 AM

Rob...in for the sport mirrors. Can you get a pic of the glove box so I can confirm the shape it's in? All shipped to 80138...

Thanks.

Dave

**Hart_Rod** · 03-10-2010, 10:22 AM

Quote:

Originally Posted by BigRed Beast

Rob...in for the sport mirrors. Can you get a pic of the glove box so I can confirm the shape it's in? All shipped to 80138...

Thanks.

Dave

Will do. I'll take some more pictures of the mirrors also.

**Hart_Rod** · 03-10-2010, 11:03 AM

Quote:

Originally Posted by BigRed Beast

Rob...in for the sport mirrors. Can you get a pic of the glove box so I can confirm the shape it's in? All shipped to 80138...

Thanks.

Dave

Here's some pictures. The glove gox looks to have been installed at one time and then removed. Not perfect, but not tore up. The drivers mirror cleaned up reall well and is in nice shape. The passengers mirror is pitted on the chrome and has a small crack in the glass on one corner. I took a picture but it's hard to see. Nothing that hurts the function, but it's not pretty. I will go $70 shipped for both. Let me know.

MAK191 · 03-10-2010, 02:27 PM

Rob,
I'm interested in the 69-72 core support. Could you get me some pictures of the rust? Is it GM or aftermarket? Thanks
Mike

**Hart_Rod** · 03-10-2010, 02:38 PM

Its a factory core support. Here are a couple of pictures. I can get more if you need them. What else are you looking for?

faribran · 03-10-2010, 02:55 PM

Rob,
can you post a pic of the 67 fenders... i am coming down your way soon... i may be interested..

**Hart_Rod** · 03-10-2010, 03:09 PM

Quote:

Originally Posted by faribran

Rob,
can you post a pic of the 67 fenders... i am coming down your way soon... i may be interested..

I'll have to take some when I go over to the shop. When are you coming down?

dznucks · 03-10-2010, 03:31 PM

I'll take the a/c controller off your hands.

**Hart_Rod** · 03-11-2010, 11:10 AM

Quote:

Originally Posted by dznucks

I'll take the a/c controller off your hands.

PM sent.

R/

faribran · 03-11-2010, 11:17 AM

Rob,
we are flying out of Valpariso Airport next Tue and Returning the following Saturday(20th).... if we get back early enuff... might be able to come by.... but will be driving a car, (no way to haul)

**Hart_Rod** · 03-11-2010, 11:25 AM

Quote:

Originally Posted by faribran

Rob,
we are flying out of Valpariso Airport next Tue and Returning the following Saturday(20th).... if we get back early enuff... might be able to come by.... but will be driving a car, (no way to haul)

No worries. If you want them, I can keep them until the next time you have a chance to come down.

R/

19stepSide72 · 03-11-2010, 01:07 PM

interested in the glove box too if it gets to me. pm me if so please.

faribran · 03-11-2010, 01:24 PM

thanks sir.... waiting for the pics you post later on...

03-08-2010, 08:11 PM	#26
LUCKTRUCK Registered User Join Date: May 2007 Location: new jersey Posts: 610	Re: Un-needed parts hartrod, sorry I'm gonna pass on the linkage __________________ LUCKTRUCK

03-08-2010, 11:46 PM	#28
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: Un-needed parts overall length and height please on the fans please.... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

03-09-2010, 12:26 AM	#30
Southern C10 Is it done yet? Join Date: Apr 2008 Location: Whispering Pines, NC Posts: 826	Re: Un-needed parts Rob, Pics of the AC controls and 72 front fenders. Ill have to email Jason again __________________ 1972 Chevy SWB New 383 Stroker/350 Turbo Some day i'll paint it John 3:16 MY BUILD THREAD http://67-72chevytrucks.com/vboard/s...d.php?t=398108

03-09-2010, 05:43 PM	#34
64GMCHorsepower Justified! Join Date: Apr 2007 Location: Valencia, Ca Posts: 1,366	Re: Un-needed parts Thanks for the measurements Rob, the fans won't fit my radiator.... __________________ Chad 1964 GMC Fleetside Shortbed....350/700R4 tranny

03-09-2010, 08:47 PM	#35
jmedero Registered User Join Date: Jun 2008 Location: pensacola fl Posts: 3,073	Re: Un-needed parts did you get a manicure?.... lol bump __________________ 68 BB burb build thread Scott's super slam front/rear http://67-72chevytrucks.com/vboard/s...d.php?t=378084

03-09-2010, 09:22 PM	#36
quentin hill Registered User Join Date: Jan 2010 Location: jacksonville Florida Posts: 74	Re: Un-needed parts do you still have the grill or is it gone?

03-10-2010, 10:19 AM	#38
BigRed Beast Registered User Join Date: Aug 2007 Location: Parker, CO Posts: 140	Re: Un-needed parts Rob...in for the sport mirrors. Can you get a pic of the glove box so I can confirm the shape it's in? All shipped to 80138... Thanks. Dave __________________ Big Red Beast 1972 Blazer CST AC/Auto/4x4 "Project" 1997 F 350 CC Powerstroke "The Great White"

03-10-2010, 02:27 PM	#41
MAK191 Registered User Join Date: Nov 2009 Location: FL Posts: 335	Re: Un-needed parts Rob, I'm interested in the 69-72 core support. Could you get me some pictures of the rust? Is it GM or aftermarket? Thanks Mike

03-10-2010, 02:38 PM	#42
Hart_Rod ************* Join Date: Apr 2005 Location: Pensacola, FL Posts: 17,858	Re: Un-needed parts Its a factory core support. Here are a couple of pictures. I can get more if you need them. What else are you looking for? Attached Images __________________ Rob - https://www.instagram.com/hart_rod_c10 As Iron Sharpens Iron, So One Man Sharpens Another. Proverbs 27:17 FOR SALE: DBW pedal bracket - http://67-72chevytrucks.com/vboard/s...d.php?t=651123 FOR SALE: Hood Brackets http://67-72chevytrucks.com/vboard/s...d.php?t=679945 1987 Silverado SWB - 34.5K original miles http://67-72chevytrucks.com/vboard/s...d.php?t=801834 1969 SuperBurb - http://67-72chevytrucks.com/vboard/s...d.php?t=200387 1968 Farm truck - http://67-72chevytrucks.com/vboard/s...d.php?t=358692 1968 SWB - http://67-72chevytrucks.com/vboard/s...d.php?t=551258 1948 Chevy - http://67-72chevytrucks.com/vboard/s...=122164&page=3

03-10-2010, 02:55 PM	#43
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Un-needed parts Rob, can you post a pic of the 67 fenders... i am coming down your way soon... i may be interested.. __________________ "

03-10-2010, 03:31 PM	#45
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Un-needed parts I'll take the a/c controller off your hands. Last edited by dznucks; 03-10-2010 at 03:31 PM.

03-11-2010, 11:17 AM	#47
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Un-needed parts Rob, we are flying out of Valpariso Airport next Tue and Returning the following Saturday(20th).... if we get back early enuff... might be able to come by.... but will be driving a car, (no way to haul) __________________ "

03-11-2010, 01:07 PM	#49
19stepSide72 wanna be 67 Join Date: May 2007 Location: Nor Cal Posts: 696	Re: Un-needed parts interested in the glove box too if it gets to me. pm me if so please.

03-11-2010, 01:24 PM	#50
faribran Registered User Join Date: Jul 2005 Location: AL Posts: 1,828	Re: Un-needed parts thanks sir.... waiting for the pics you post later on... __________________ "



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.