Custom Billet Aluminum Dash Panels - Page 3 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Ryan Hubbard · 03-14-2012, 05:04 PM

Quote:

Originally Posted by effects66

Do you have any of these three hole but with out any of the wording (washer and lights) just the holes for them?

No all of them have the letters.

Ryan Hubbard · 03-14-2012, 05:05 PM

Quote:

Originally Posted by Rat72

Love the classic look but I'm looking for a slightly different guage arrangement, do you have anything like this?
<p>

<p>

Specifically I like the middle gauges closer together and the angled lower guages are pleasing to my eye. I have 5 inch center guages and 2-5/8 lower guages. This setup may not look right with the factory looking rim that surrounds yours but thought I'd see what you have.

Thanks,
Whit

No sorry I only do the original configuration.

tomsprojects · 03-15-2012, 01:36 AM

Thanks for the bezel it will work great for what I want to do with it.
Tomsprojects
Posted via Mobile Device

RWB-713 · 01-24-2013, 01:31 PM

Ryan, I ordered a bezel & GB door from you on Jan 11, 2013. I paid you that day, and you said you would ship out the following monday (Jan 14), I have yet to recieve the pieces, and I haved PM'd you twice asking for an update... no reply...

Anyone else have any problems communicating with Ryan?

Ryan Hubbard · 01-24-2013, 06:37 PM

Quote:

Originally Posted by RWB-713

Ryan, I ordered a bezel & GB door from you on Jan 11, 2013. I paid you that day, and you said you would ship out the following monday (Jan 14), I have yet to recieve the pieces, and I haved PM'd you twice asking for an update... no reply...

Anyone else have any problems communicating with Ryan?

I just got the notice of this post on my email. I have been out of the office on jobs and did not have cell service or email(I work offshore). I just went down to my shipping area and looked for the info on the package. Apparently, your package was ready to go out but somehow got placed with the big shipment we received on the Monday Jan 14. So I am sorry for the mix up and it was my fault. I am personally sending this out myself today.

RWB-713 · 01-24-2013, 07:41 PM

Appreciate the response Ryan. All is well now!

RWB-713 · 01-30-2013, 12:25 AM

Cluster & Door recieved today! Great work! Thanks!

TXPinstriper · 02-15-2013, 11:40 AM

Are these still available I would like to purchase a set.

POPO1984 · 02-16-2013, 07:17 PM

Quote:

Originally Posted by Ryan Hubbard

No sorry I only do the original configuration.

Do you do any bezels with 2 5/8 lower gauges
Posted via Mobile Device

Ryan Hubbard · 02-16-2013, 11:04 PM

Right now I only have three panels on the shelf. I have one that has two 5" holes and one 3 3/8" hole in the middle and four 2 1/16" holes along the bottom. I also have two left that have two 5" holes with one 3 3/8" hole in the middle with no other holes.

I do not make any panels for 2 5/8" holes because they won't work with 5" holes.

Bpilcher72 · 03-17-2014, 02:40 PM

Anybody know if Ryan is still alive and selling products? all the companies out there like CPP and Brothers do not offer the Panels with the 2 1/16 gauges. I am stuck with 5 of the Autometer C2 gauges and need a dash bezel. I am not going to cut my dash....anybody out there got any leads on a bezel with 2 5inch and 4 or 5 of the 2 1/16?

mcmlxix · 03-18-2014, 05:16 AM

Ryan was signed onto the site yesterday... go to his Members Page

http://67-72chevytrucks.com/vboard/member.php?u=34224

Bpilcher72 · 03-18-2014, 09:37 AM

I really appreciate that a lot. I went to his page and I had left a message there a week or two ago. No response yet. Appreciate all the good folks on here!

Bpilcher72 · 05-16-2014, 02:49 PM

Ryan sold me a Dash bezel and I had to spend $150 to get it chromed! I had it copper dipped so it would be super smooth and here are the results.

[IMG]

[/IMG]

[IMG]

[/IMG]

C10_ustacould · 04-21-2015, 02:36 PM

I'd like a dash and glovebox door like these but I'd like a panel that mimicks the original panel almost exactly so I can use this set of gauges from New Vintage...

Name: NVU-73731-01.jpg
Views: 527
Size: 31.8 KB

Name: NVU-73731-01.jpg
Views: 527
Size: 31.8 KB

Anyone have an idea?

**bigmac73** · 12-22-2015, 01:50 PM

Ryan ,
Are you still offering these panels?

Last_Paladin · 04-08-2018, 01:58 PM

I'd love a 7 hole panel... anyone know if Ryan is still making them? I bought a set of Dakota Digital HDX gauges. I want the best bezel.

Bpilcher72 · 03-19-2019, 09:32 AM

I have his email address

mcmlxix · 03-19-2019, 10:08 AM

https://ringbrothers.com/1967-1972-c...uge-bezel.html

Last_Paladin · 03-24-2019, 10:03 AM

Quote:

Originally Posted by mcmlxix

https://ringbrothers.com/1967-1972-c...uge-bezel.html

Thanks for posting that.

Ryan Hubbard · 03-24-2019, 02:00 PM

Just to give you guys an update. Due to an issue with my father, he shut the company down on me in 2017, I no longer have my machine shop or any of the equipment to build the panels.

mcmlxix · 03-24-2019, 04:41 PM

Quote:

Originally Posted by Ryan Hubbard

Just to give you guys an update. Due to an issue with my father, he shut the company down on me in 2017, I no longer have my machine shop or any of the equipment to build the panels.

Sorry to hear that Ryan.

03-15-2012, 01:36 AM	#53
tomsprojects Registered User Join Date: Nov 2011 Location: san diego ca Posts: 234	Re: Custom Billet Aluminum Dash Panels Thanks for the bezel it will work great for what I want to do with it. Tomsprojects Posted via Mobile Device

01-24-2013, 01:31 PM	#54
RWB-713 Registered User Join Date: Oct 2010 Location: Aztec,NM Posts: 178	Re: Custom Billet Aluminum Dash Panels Ryan, I ordered a bezel & GB door from you on Jan 11, 2013. I paid you that day, and you said you would ship out the following monday (Jan 14), I have yet to recieve the pieces, and I haved PM'd you twice asking for an update... no reply... Anyone else have any problems communicating with Ryan? __________________ *" I strive for a level of perfection that I do not possess the skillset to achieve. "* Ariel <> '67 C10 Shorty Stepside * Build On Hold * First Ride <> '81 C10 Long Fleet * Current Project *

01-24-2013, 07:41 PM	#56
RWB-713 Registered User Join Date: Oct 2010 Location: Aztec,NM Posts: 178	Re: Custom Billet Aluminum Dash Panels Appreciate the response Ryan. All is well now! __________________ *" I strive for a level of perfection that I do not possess the skillset to achieve. "* Ariel <> '67 C10 Shorty Stepside * Build On Hold * First Ride <> '81 C10 Long Fleet * Current Project *

01-30-2013, 12:25 AM	#57
RWB-713 Registered User Join Date: Oct 2010 Location: Aztec,NM Posts: 178	Re: Custom Billet Aluminum Dash Panels Cluster & Door recieved today! Great work! Thanks! __________________ *" I strive for a level of perfection that I do not possess the skillset to achieve. "* Ariel <> '67 C10 Shorty Stepside * Build On Hold * First Ride <> '81 C10 Long Fleet * Current Project *

02-15-2013, 11:40 AM	#58
TXPinstriper Registered User Join Date: Jan 2012 Location: Santa Fe, Texas Posts: 352	Re: Custom Billet Aluminum Dash Panels Are these still available I would like to purchase a set. __________________ Stocker to Rocker http://67-72chevytrucks.com/vboard/s...=1#post5148380 "THE GRADUATE" http://67-72chevytrucks.com/vboard/s...08#post5763408 JohnnyC http://instagram.com/texpinstriper/

02-16-2013, 11:04 PM	#60
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Custom Billet Aluminum Dash Panels Right now I only have three panels on the shelf. I have one that has two 5" holes and one 3 3/8" hole in the middle and four 2 1/16" holes along the bottom. I also have two left that have two 5" holes with one 3 3/8" hole in the middle with no other holes. I do not make any panels for 2 5/8" holes because they won't work with 5" holes.

03-17-2014, 02:40 PM	#61
Bpilcher72 Registered User Join Date: Feb 2011 Location: Lindale, GA Posts: 103	Re: Custom Billet Aluminum Dash Panels Anybody know if Ryan is still alive and selling products? all the companies out there like CPP and Brothers do not offer the Panels with the 2 1/16 gauges. I am stuck with 5 of the Autometer C2 gauges and need a dash bezel. I am not going to cut my dash....anybody out there got any leads on a bezel with 2 5inch and 4 or 5 of the 2 1/16?

03-18-2014, 05:16 AM	#62
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Custom Billet Aluminum Dash Panels Ryan was signed onto the site yesterday... go to his Members Page http://67-72chevytrucks.com/vboard/member.php?u=34224 __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE

03-18-2014, 09:37 AM	#63
Bpilcher72 Registered User Join Date: Feb 2011 Location: Lindale, GA Posts: 103	Re: Custom Billet Aluminum Dash Panels I really appreciate that a lot. I went to his page and I had left a message there a week or two ago. No response yet. Appreciate all the good folks on here!

05-16-2014, 02:49 PM	#64
Bpilcher72 Registered User Join Date: Feb 2011 Location: Lindale, GA Posts: 103	Re: Custom Billet Aluminum Dash Panels Ryan sold me a Dash bezel and I had to spend $150 to get it chromed! I had it copper dipped so it would be super smooth and here are the results. [IMG][/IMG] [IMG][/IMG]

04-21-2015, 02:36 PM	#65
C10_ustacould A day late and $1 short... Join Date: Dec 2008 Location: Northwest FL Posts: 3,877	Re: Custom Billet Aluminum Dash Panels I'd like a dash and glovebox door like these but I'd like a panel that mimicks the original panel almost exactly so I can use this set of gauges from New Vintage... Anyone have an idea? __________________ Buck Instagram: C10_ustacould 1963 SWB Fleet Side 528 Desert Beige Milly 1967 SWB Step Side 506 Medium Blue The Old Girl 1968 SWB Fleet Side 503 Light Green Ellie SOLD 1965 SWB Fleet Side 507 Light Blue Prescription Strength SOLD 1971 SWB Fleet Side 521 White Shiro SOLD 1968 SWB Step Side 503 Light Green My Old Farm Truck SOLD

12-22-2015, 01:50 PM	#66
bigmac73 Senior Member Join Date: Mar 2012 Location: Chesapeake, Va Posts: 1,275	Re: Custom Billet Aluminum Dash Panels Ryan , Are you still offering these panels? __________________ Mike 72 C-10 Cheyenne off frame resto and Upgraded to 4 wheel disk, Tilt, Dakota Digital Dash / Rear slider. 421 SBC / TH350 3000RPM Stall Progression Ignition /Holley 750 DP/3:73 gear Eaton Limited Slip unit / 2 1/2 exhaust glasspacks

04-08-2018, 01:58 PM	#67
Last_Paladin Registered User Join Date: Feb 2011 Location: Beverly, MA Posts: 474	Re: Custom Billet Aluminum Dash Panels I'd love a 7 hole panel... anyone know if Ryan is still making them? I bought a set of Dakota Digital HDX gauges. I want the best bezel.

03-19-2019, 09:32 AM	#68
Bpilcher72 Registered User Join Date: Feb 2011 Location: Lindale, GA Posts: 103	Re: Custom Billet Aluminum Dash Panels I have his email address

03-19-2019, 10:08 AM	#69
mcmlxix Collector of Projects Join Date: Apr 2003 Location: Las Vegas Posts: 3,106	Re: Custom Billet Aluminum Dash Panels https://ringbrothers.com/1967-1972-c...uge-bezel.html __________________ Rich 1972 K5 Blazer CST Click HERE D60 BIG BRAKE UPGRADE Click HERE



Register or Log In To remove these advertisements.

03-24-2019, 02:00 PM	#71
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: Custom Billet Aluminum Dash Panels Just to give you guys an update. Due to an issue with my father, he shut the company down on me in 2017, I no longer have my machine shop or any of the equipment to build the panels.

Register or Log In To remove these advertisements.