Crewcab "the rolling resume build" - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

BigJeff426 · 03-12-2013, 09:50 PM

Posted via Mobile Device
Posted via Mobile Device
Posted via Mobile Device

jbclassix · 03-13-2013, 01:58 AM

Been working on the drivers side b-pillar. Even though the idea of using Bear-Claws is being tossed around (for 1-pc glass clearance) I am still fabbing a left striker plate. there is also an extra inner wall going in because there is a structure on the other side that I can't duplicate.

**superflysteiny** · 03-19-2013, 05:54 PM

any more updates

BigJeff426 · 03-19-2013, 09:56 PM

HAPPY BIRTHDAY BRO!!
Posted via Mobile Device

jbclassix · 03-20-2013, 01:03 AM

Quote:

Originally Posted by superflysteiny

any more updates

Coming soon! I need to post pictures of what I have done. It would be a lot easier if I knew how to upload pictures straight from my phone to the thread! I have a droid. Looks like Monday we are getting the full length inner rockers made... and seeing about the outers. I started on the new dash too.

Quote:

Originally Posted by BigJeff426

HAPPY BIRTHDAY BRO!!
Posted via Mobile Device

Thanks Bro!

**Dieselwrencher** · 03-21-2013, 05:23 PM

Happy late Birthday dude!

jbclassix · 03-24-2013, 02:43 AM

Quote:

Originally Posted by Dieselwrencher

Happy late Birthday dude!

Thank you! Did you gift wrap a SBDD for me?

I did a little more with the b-pillar after the kids went to sleep. I have a little more to do behind the strike plate still. The inner support for the hinges is built. It just needs to be welded in, and then I can start on the outer skin for the B-pillar. I need to pull it off so I can take a picture of the inner support.

I have also been messing around trying to get the upper portion of the door frames straight. I finally just cut a relief in what is left of the roof skin on both sides. Now I can pull them out to where I want them to be.

Sorry about the pictures. I just looked at my phone and realized the lens is filthy. Guess that comes with being a mechanic in the desert!

**Dieselwrencher** · 03-24-2013, 08:06 PM

No, sorry. No SBDD for you.

**superflysteiny** · 03-25-2013, 01:55 PM

Very cool cant wait to see it together

jbclassix · 03-26-2013, 12:59 AM

Full length inner rockers ordered. We are going to hotrod the outers.

Probably wont do any work to the cab this week. I have to do a timing belt on the Sequoia.

**67cheby** · 03-26-2013, 05:59 PM

looking good !

blake's first · 04-08-2013, 11:50 PM

Blake is my nephew on kids of my own so I have to blow some cash on him.. I always wanted a four door but it looks like a lot of work maybe someday...

jbclassix · 04-08-2013, 11:56 PM

There is an Uncle! BTW, diggin the Tootsie shirt!

jbclassix · 04-13-2013, 10:34 PM

Back at it today, but with only 3 hours we only got a few things done. It is really nice being able to get both families together.

1. We fixed the air leak on my brothers air compressor (no pictures of that)

2. We troubleshot the AC and blower noise in the funding truck.

3. We removed the front clip from the donor chassis

4. We convertibled the one of the donor cabs.

This is something new. Both of the brake mounting brackets are broken right here. I work on a fleet of Chevy's with the 11.5 AAM and a few Dodges, and I have never seen this before.

Hardesty454 · 04-14-2013, 12:01 AM

Great build. Subscribed!

jbclassix · 04-28-2013, 12:52 PM

Does anyone else get blisters from drilling spot welds! I got the passenger side rear door frame mocked up last night. I didn't take any pictures because I was on a roll. I will have some tonight.

Pife · 04-30-2013, 01:33 AM

I used to get blisters then I got a plasma cutter. faster and less painful.

jbclassix · 04-30-2013, 07:48 AM

Quote:

Originally Posted by Pife

I used to get blisters then I got a plasma cutter. faster and less painful.

I have never used a plasma cutter to cut spot welds... but I also drill a pilot hole to start a plasma cutter in a cut. How do you do that?
Posted via Mobile Device

RatRod68 · 04-30-2013, 08:11 AM

Quote:

Originally Posted by jbclassix

but I also drill a pilot hole to start a plasma cutter in a cut.
Posted via Mobile Device

That sir, is genius

jbclassix · 04-30-2013, 08:36 AM

Quote:

Originally Posted by RatRod68

That sir, is genius

It was just what I was shown the first time I used one. If not you can damage the electrode. I can't take credit for it.
Posted via Mobile Device

RatRod68 · 04-30-2013, 09:03 AM

Quote:

Originally Posted by jbclassix

It was just what I was shown the first time I used one. If not you can damage the electrode. I can't take credit for it.
Posted via Mobile Device

Yea, I have messed up the electrode before. Now Miller has this little cap thing that goes over the tip, and it has the perfect amount of spacing, so all you have to do is drag the gun across the work area and it cuts perfect. I need to get one of those

jbclassix · 04-30-2013, 09:58 AM

This is as far as I got before we left for the kids' surgery. Its just sitting there right now...

I think I just figured out how to post pictures from my phone
Posted via Mobile Device

**Dieselwrencher** · 04-30-2013, 06:46 PM

Nice work! Good luck with the surgeries!

mjensen · 04-30-2013, 09:39 PM

Looking awesome! I can't wait to see this bad boy done :-)

BTW, I use Google Chrome on my Droid, and it works just like the desktop version which makes uploading a breeze

oilyrag80 · 05-01-2013, 04:13 PM

Quote:

Originally Posted by jbclassix

Does anyone else get blisters from drilling spot welds!

Yes! drilling out spot welds are the worst. Think i'm done with most of my spot weld drilling thankfully.

03-12-2013, 09:50 PM	#101
BigJeff426 Registered User Join Date: Oct 2012 Location: lancaster ca Posts: 22	Re: Crewcab "the rolling resume build" Posted via Mobile Device Posted via Mobile Device Posted via Mobile Device

03-13-2013, 01:58 AM	#102
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Crewcab "the rolling resume build" Been working on the drivers side b-pillar. Even though the idea of using Bear-Claws is being tossed around (for 1-pc glass clearance) I am still fabbing a left striker plate. there is also an extra inner wall going in because there is a structure on the other side that I can't duplicate. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

03-19-2013, 05:54 PM	#103
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Crewcab "the rolling resume build" any more updates __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-19-2013, 09:56 PM	#104
BigJeff426 Registered User Join Date: Oct 2012 Location: lancaster ca Posts: 22	Re: Crewcab "the rolling resume build" HAPPY BIRTHDAY BRO!! Posted via Mobile Device

03-21-2013, 05:23 PM	#106
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Crewcab "the rolling resume build" Happy late Birthday dude! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-24-2013, 08:06 PM	#108
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Crewcab "the rolling resume build" No, sorry. No SBDD for you. __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

03-25-2013, 01:55 PM	#109
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Crewcab "the rolling resume build" Very cool cant wait to see it together __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

03-26-2013, 12:59 AM	#110
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Crewcab "the rolling resume build" Full length inner rockers ordered. We are going to hotrod the outers. Probably wont do any work to the cab this week. I have to do a timing belt on the Sequoia. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

03-26-2013, 05:59 PM	#111
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Crewcab "the rolling resume build" looking good ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

04-08-2013, 11:50 PM	#112
blake's first Registered User Join Date: Mar 2013 Location: Herald cal. Posts: 243	Re: Crewcab "the rolling resume build" Blake is my nephew on kids of my own so I have to blow some cash on him.. I always wanted a four door but it looks like a lot of work maybe someday... Attached Images

04-08-2013, 11:56 PM	#113
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Crewcab "the rolling resume build" There is an Uncle! BTW, diggin the Tootsie shirt! __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

04-13-2013, 10:34 PM	#114
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Crewcab "the rolling resume build" Back at it today, but with only 3 hours we only got a few things done. It is really nice being able to get both families together. 1. We fixed the air leak on my brothers air compressor (no pictures of that) 2. We troubleshot the AC and blower noise in the funding truck. 3. We removed the front clip from the donor chassis 4. We convertibled the one of the donor cabs. This is something new. Both of the brake mounting brackets are broken right here. I work on a fleet of Chevy's with the 11.5 AAM and a few Dodges, and I have never seen this before. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

04-14-2013, 12:01 AM	#115
Hardesty454 Registered User Join Date: Feb 2011 Location: Riverbank, Ca Posts: 1,006	Re: Crewcab "the rolling resume build" Great build. Subscribed! __________________ Rob 1971 c10 - ground up in progress Tripp's Speed Shop Build - http://67-72chevytrucks.com/vboard/s...d.php?t=589750

04-28-2013, 12:52 PM	#116
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Crewcab "the rolling resume build" Does anyone else get blisters from drilling spot welds! I got the passenger side rear door frame mocked up last night. I didn't take any pictures because I was on a roll. I will have some tonight. __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

04-30-2013, 01:33 AM	#117
Pife Registered User Join Date: Jan 2012 Location: Saint Louis Posts: 69	Re: Crewcab "the rolling resume build" I used to get blisters then I got a plasma cutter. faster and less painful.



Register or Log In To remove these advertisements.

04-30-2013, 09:58 AM	#122
jbclassix Junk Yartist Join Date: Jul 2009 Location: Greeley, CO Posts: 2,203	Re: Crewcab "the rolling resume build" This is as far as I got before we left for the kids' surgery. Its just sitting there right now... I think I just figured out how to post pictures from my phone Posted via Mobile Device Attached Images __________________ -Jeremy YOU ONLY FAIL IF YOU STOP TRYING 70 Crew Cab Build Link 70 GMC Suburban 4X4 build thread 95 Yukon Daily Driver Rebuilding an NP205

04-30-2013, 06:46 PM	#123
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,142	Re: Crewcab "the rolling resume build" Nice work! Good luck with the surgeries! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

04-30-2013, 09:39 PM	#124
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Crewcab "the rolling resume build" Looking awesome! I can't wait to see this bad boy done :-) BTW, I use Google Chrome on my Droid, and it works just like the desktop version which makes uploading a breeze __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

Register or Log In To remove these advertisements.