Shorty Headers - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1BadSS · 07-25-2004, 04:56 PM

Got a set of brand new shorty headers, no need for them since i'm going with long tubes.

$50

gets you two shorty headers, new reducers to 2.25", and two new 31" glasspacks.

HuggerCST · 07-25-2004, 04:59 PM

Would they happen to have a place for an O2 sensor? If so, I'm interested.

1BadSS · 07-25-2004, 05:07 PM

You can get the reducers for $10 from autozone that have oxygen sensor fittings that will fit on these headers.

Part #10105

HuggerCST · 07-25-2004, 05:09 PM

I'll PM you.

1BadSS · 07-25-2004, 05:10 PM

gotcha

68 chevy truck-TPI · 07-25-2004, 06:52 PM

Quote:

Originally Posted by 1BadSS

You can get the reducers for $10 from autozone that have oxygen sensor fittings that will fit on these headers.

Part #10105

on the autozone web site this part# comes back as:
Painless Performance 12 Circuit Jeep Harness (1974 & earlier)?????
are you sure about that #?

1BadSS · 07-25-2004, 07:05 PM

I got these reducers from autozone, p.n 10005, and on the box p.n 10105 is what you need. Found the part at summits website, enough tho you should be able to order them when you gfo into an autozone store.

BIG-10105 is the summit number

Autozone doesnt even use the same part numbers for the reduces that the company does.

ACES · 07-25-2004, 07:17 PM

Where are you located?

Bamm · 07-25-2004, 09:00 PM

Put me in line for the headers, just in case the guys ahead of me drop out. Have they been run any? Are there any clearance issues with our trucks? Do you have any pics? Are they block huggers? Thanks, .....Jerry

1BadSS · 07-25-2004, 09:10 PM

Quote:

Originally Posted by Bamm 24

Put me in line for the headers, just in case the guys ahead of me drop out. Have they been run any? Are there any clearance issues with our trucks? Do you have any pics? Are they block huggers? Thanks, .....Jerry

They are currently installed on my 69 c10 with a 283. They clear everything just fine, and it looks like room to spare, thats why i'm going to longtube headers. These look like they've never been fired, havent even had the paint on them cooled at all. They look to be pretty close to the block to me, i'd say closer than the longtubes that I own. Here's a picture... its not the best but its what I have for now.

HuggerCST · 07-25-2004, 09:54 PM

Bamm 24- Or whoever is next in line, You're up! My friend (who told me he was looking for some) changed his mind.

Sorry about that 1BaddSS!

Bamm · 07-26-2004, 08:23 AM

I'd like to se a pic of them once you take them off to see how they turn out at the collectors. Where are you located? Thanks, ......Jerry

1BadSS · 07-26-2004, 12:11 PM

Quote:

Originally Posted by Bamm 24

I'd like to se a pic of them once you take them off to see how they turn out at the collectors. Where are you located? Thanks, ......Jerry

Eastern shore of md, and they came out right before the back of the oilpan.

Bamm · 07-26-2004, 01:34 PM

My dad just got back from fishing over there, caught croakers, a few flounder and a couple of blues. I'm just outside of Richmond, Va. Hey once you get them out shoot me a pic and i'll see what shipping's gonna hurt me for, i'll let you know. Thanks, .....Jerry

1BadSS · 07-26-2004, 03:43 PM

Quote:

Originally Posted by Bamm 24

My dad just got back from fishing over there, caught croakers, a few flounder and a couple of blues. I'm just outside of Richmond, Va. Hey once you get them out shoot me a pic and i'll see what shipping's gonna hurt me for, i'll let you know. Thanks, .....Jerry

Alright, will do. I just climbed back out from under the truck, spent a good 6 hours fixing the PO's ****ups.... it was quite fun to say the least

I reckon i'm going to drop my headers in tomorrow so these others will have to come out.

Bamm · 07-26-2004, 03:46 PM

Cool, i'll be looking for some pics.........Jerry

RON WOODGEARD · 07-26-2004, 07:47 PM

You can put me in line also,,

Woodgeard@earthlink.net

1BadSS · 07-26-2004, 08:36 PM

here's a picture of the headers I have for sale, and the longtubes (sorta rusty) that i'm using... I dont quite think they are shorties now...

Bamm · 07-26-2004, 09:04 PM

Yeah, they don't quite look like shorties. I'm looking for some shorty headers, preferably some block huggers angled (45 degree?) or some 3/4 chevelle headers. Thanks anyway, good luck with the sale. Next in line...........Jerry

07-25-2004, 04:59 PM	#2
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Would they happen to have a place for an O2 sensor? If so, I'm interested. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

07-25-2004, 05:07 PM	#3
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	You can get the reducers for $10 from autozone that have oxygen sensor fittings that will fit on these headers. Part #10105 __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

07-25-2004, 05:09 PM	#4
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	I'll PM you. __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

07-25-2004, 05:10 PM	#5
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	gotcha __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

07-25-2004, 07:05 PM	#7
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	I got these reducers from autozone, p.n 10005, and on the box p.n 10105 is what you need. Found the part at summits website, enough tho you should be able to order them when you gfo into an autozone store. BIG-10105 is the summit number Autozone doesnt even use the same part numbers for the reduces that the company does. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

07-25-2004, 04:56 PM	#1
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	Shorty Headers Got a set of brand new shorty headers, no need for them since i'm going with long tubes. $50 gets you two shorty headers, new reducers to 2.25", and two new 31" glasspacks. __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

07-25-2004, 07:17 PM	#8
ACES Life is a gamble Join Date: Oct 2003 Location: Lee's Summit, MO Posts: 796	Where are you located? __________________ 1970 Orange CST C-10 w/350, posi, Longbed The torpid artist seeks inspiration at any cost, by virtue or by vice, by friend or by fiend, by prayer or by wine. -- Ralph Waldo Emerson

07-25-2004, 09:00 PM	#9
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Put me in line for the headers, just in case the guys ahead of me drop out. Have they been run any? Are there any clearance issues with our trucks? Do you have any pics? Are they block huggers? Thanks, .....Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

07-25-2004, 09:54 PM	#11
HuggerCST Registered User Join Date: Jul 2001 Location: North Louisiana Posts: 4,501	Bamm 24- Or whoever is next in line, You're up! My friend (who told me he was looking for some) changed his mind. Sorry about that 1BaddSS! __________________ Wynne 70 CST short fleet Hugger orange & white, 350/350, ps, pb, air, tilt, tach/vac/speedwarning, original buckets, AM/FM, oak bed floor, shoulder belts, 3.5"/5.5" drop, 20" American Racing VN425s. Build thread 53 Chevy shortbed 69 Camaro Click here to subscribe Chevy GMC International Truck Club Louisiana Charter Member http://www.louisianaclassictruckclub.com

07-26-2004, 08:23 AM	#12
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	I'd like to se a pic of them once you take them off to see how they turn out at the collectors. Where are you located? Thanks, ......Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

07-26-2004, 01:34 PM	#14
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	My dad just got back from fishing over there, caught croakers, a few flounder and a couple of blues. I'm just outside of Richmond, Va. Hey once you get them out shoot me a pic and i'll see what shipping's gonna hurt me for, i'll let you know. Thanks, .....Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

07-26-2004, 03:46 PM	#16
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Cool, i'll be looking for some pics.........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS

07-26-2004, 07:47 PM	#17
RON WOODGEARD Resident Young Old Dude ! Join Date: Jul 2001 Location: Nevada Posts: 1,948	You can put me in line also,, Woodgeard@earthlink.net

07-26-2004, 08:36 PM	#18
1BadSS NOT REALLY BANNED! Join Date: Jul 2004 Location: Shawnee, KS Posts: 1,072	here's a picture of the headers I have for sale, and the longtubes (sorta rusty) that i'm using... I dont quite think they are shorties now... Attached Images __________________ 1987 Mustang Coupe - 2.7 Stroker, 78mm turbo, Stainless header, 3" Exh, FMIC, 160lb/hr Injectors, MS3, twin walbro 255's, 34psi. Eating V8's daily. 04 Pontiac GTO 04 Ford Mustang GT 68 C20 LWB stripper truck 73 K5 Cheyenne 76 C20 Sierra Crew SRW 88 K20 Suburban I'm not hammering on metal just to hammer, i'm creating a piece of art.

07-26-2004, 09:04 PM	#19
Bamm Cowboy Fan for Life!!!!!! Join Date: Apr 2002 Location: Amelia, Virginia Posts: 2,921	Yeah, they don't quite look like shorties. I'm looking for some shorty headers, preferably some block huggers angled (45 degree?) or some 3/4 chevelle headers. Thanks anyway, good luck with the sale. Next in line...........Jerry __________________ 1967 ShortBed Fleetside 3/4 Drop 350/700R4 Tilt wheel 18 x 8 Torque Thrust II's Future mods: All new gauges & wood bed My Zip is 23002 I ship UPS, USPS



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.