Blazer Windsheild Frames. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Classic Heartbeat** · 05-15-2006, 01:47 PM

Well I contacted my sheetmetal supplier about manufacturing Blazer windsheild frames and this time they said YES!!!!!!!!!!!!!!!!!!!!! So I will be cutting my parts Blazer's windsheild frame out and sending it in!! It probably will be a year or so before they are done and we will not be getting any exclusivity on the part, but they will be available. Now I just got to figure out where I want to cut it at. WES www.ClassicHeartbeat.com

krue · 05-15-2006, 01:53 PM

Score!!!!!!!!! You're the man!

72 CustomCamper · 05-15-2006, 02:26 PM

Hey Wes, keep going like this and people will be able to build a Blazer tub from scratch...

Chuck

**Yukon Jack** · 05-15-2006, 02:52 PM

That is very cool - you are bringing some great things to us consumers!!!

LUV2XCLR8 · 05-15-2006, 03:18 PM

Quote:

Originally Posted by 72 CustomCamper

Hey Wes, keep going like this and people will be able to build a Blazer tub from scratch...

Chuck

but I am needing a repop tub now

**Classic Heartbeat** · 05-15-2006, 03:21 PM

I was going to take the rear floor sections and have those done as well, but once I removed the rockers the lower sections were completely gone...

WES

JMac11 · 05-15-2006, 03:45 PM

Check evil bay, avoid cutting your??? One on there now.......

**jamie72** · 05-15-2006, 05:00 PM

thanks wes we really appesiate it!!!!!

*Medicanman71* · 05-15-2006, 06:53 PM

Yea, you're the man... i hope i'll never need one, but should it....

72 CustomCamper · 05-15-2006, 08:59 PM

Quote:

Originally Posted by LUV2XCLR8

but I am needing a repop tub now

I'd be nice if they would do a Blazer in a crate just like they are with the 69 Camaro...

Chuck

FRENCHBLUE72 · 05-15-2006, 09:04 PM

Right on wes keep up the good work....

*72CSTC5* · 05-16-2006, 09:59 PM

Cut eh windshield frame just above the curve at the bottom of the windshield. I think the most difficult part would be fabricating around the top of the frame. If you had too, you could still fabricate some of the cowl on your own. Just a thought from some of the ones I have seen on the board that were rusted.

**special-K** · 05-17-2006, 10:03 AM

Yeah,get as much as you can,ol`boy.Great news!I racked one on a rollover and had to go strictly soft top.Another thought.There will be a few more rag top pickups as a result of your effort.

**Classic Heartbeat** · 05-17-2006, 11:08 AM

I like where the one that is on ebay is cut, so thats where I think that I will cut mine.

WES www.ClassicHeartbeat.com

paintpyro · 05-17-2006, 11:16 AM

Quote:

Originally Posted by special-K

Yeah,get as much as you can,ol`boy.Great news!I racked one on a rollover and had to go strictly soft top.Another thought.There will be a few more rag top pickups as a result of your effort.

Well, my truck windshield frame is crap. I don't want a soft top though. Removable hard top, yes.

Excellent job WES!!!

DEFIANT NCC-74205 · 05-18-2006, 05:30 PM

I'm rebuilding my frame complete. No cutting. I got the pillars whole both sides from the yard. Hammer and flat chisel. Boy my arms were sore for a week. Won't have to worry about misalignment and measuring.

Ochre · 05-18-2006, 08:29 PM

I think its definitely a step in the right direction, from what I've seen rust in the ws frame area intimidates even some bodymen and that's what causes a lot of em to get cut up...or worse, descent bodies getting cut up to patch a rustbucket

05-15-2006, 01:47 PM	#1
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Blazer Windsheild Frames. Well I contacted my sheetmetal supplier about manufacturing Blazer windsheild frames and this time they said YES!!!!!!!!!!!!!!!!!!!!! So I will be cutting my parts Blazer's windsheild frame out and sending it in!! It probably will be a year or so before they are done and we will not be getting any exclusivity on the part, but they will be available. Now I just got to figure out where I want to cut it at. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-15-2006, 01:53 PM	#2
krue Designated A-hole! Join Date: Mar 2003 Location: South Mississippi Posts: 36,448	Re: Blazer Windsheild Frames. Score!!!!!!!!! You're the man! __________________ "If it ain't broke, fix it 'til it is!" Being stupid ain't illegal. We're Still Debt Free Except for the House!!! www.daveramsey.com 70 GMC SWB Stepside project "Green Booger" soon to be 6.0l/4l80e 93 S-10 "Poppaw's Truck"

05-15-2006, 02:26 PM	#3
72 CustomCamper huh ??? Join Date: Nov 2002 Location: Fredericksburg,Va. Posts: 3,368	Re: Blazer Windsheild Frames. Hey Wes, keep going like this and people will be able to build a Blazer tub from scratch... Chuck __________________ 90 Blazer Silverado 350w/ 700R4 and 32" Kelly's "I am a bomb technician. If you see me running try to keep up!"

05-15-2006, 02:52 PM	#4
Yukon Jack Post Whore Join Date: Feb 2000 Location: Rose Hill, KS, USA Posts: 12,686	Re: Blazer Windsheild Frames. That is very cool - you are bringing some great things to us consumers!!! __________________ 1970 Blazer with a 400 sbc and 4" lift 1980 Pontiac Trans Am, 455 Oldsmobile 2012 Kawasaki Concours 14

05-15-2006, 03:21 PM	#6
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Blazer Windsheild Frames. I was going to take the rear floor sections and have those done as well, but once I removed the rockers the lower sections were completely gone... WES __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-15-2006, 03:45 PM	#7
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: Blazer Windsheild Frames. Check evil bay, avoid cutting your??? One on there now.......

05-15-2006, 05:00 PM	#8
jamie72 Senior Member Join Date: Apr 2000 Location: madison indiana Posts: 3,836	Re: Blazer Windsheild Frames. thanks wes we really appesiate it!!!!! __________________ jamie72 72 BB cheyenne -- Restoration getting started.. member #807 http://www.myspace.com/whitetailobsession www.antlertalk.com

05-15-2006, 06:53 PM	#9
Medicanman71 Account Suspended Join Date: May 2005 Location: Where the Wild Things Are Posts: 696	Re: Blazer Windsheild Frames. Yea, you're the man... i hope i'll never need one, but should it....

05-15-2006, 09:04 PM	#11
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,606	Re: Blazer Windsheild Frames. Right on wes keep up the good work.... __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-16-2006, 09:59 PM	#12
72CSTC5 Account Suspended Join Date: Nov 2004 Location: Deer Park, Tx. Posts: 2,522	Re: Blazer Windsheild Frames. Cut eh windshield frame just above the curve at the bottom of the windshield. I think the most difficult part would be fabricating around the top of the frame. If you had too, you could still fabricate some of the cowl on your own. Just a thought from some of the ones I have seen on the board that were rusted.

05-17-2006, 10:03 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,851	Re: Blazer Windsheild Frames. Yeah,get as much as you can,ol`boy.Great news!I racked one on a rollover and had to go strictly soft top.Another thought.There will be a few more rag top pickups as a result of your effort. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

05-17-2006, 11:08 AM	#14
Classic Heartbeat Project Junkie! Fishing Poor!! Join Date: Dec 1999 Location: Olympia,Wa. 98512 Posts: 10,766	Re: Blazer Windsheild Frames. I like where the one that is on ebay is cut, so thats where I think that I will cut mine. WES www.ClassicHeartbeat.com __________________ On-line catolog Classic Heartbeat Pickup Parts WEHEPP@comcast.net Call us Toll Free (888) 338-2502 Like Us on Facebook No appointment necessary. 72 BB Chevy Custom Deluxe / Custom Camper 67 I-6 (Soon to be 5.7 LS1) Panel 68 BB Chevy Short Bed 72 6.0 LQ9 Short Bed Chevy 4X4 Olympia's fastest growing truck parts supplier. Olympia's home for Wayward Chevys

05-18-2006, 05:30 PM	#16
DEFIANT NCC-74205 Registered User Join Date: Aug 2005 Location: POCONO MTS PA Posts: 64	Re: Blazer Windsheild Frames. I'm rebuilding my frame complete. No cutting. I got the pillars whole both sides from the yard. Hammer and flat chisel. Boy my arms were sore for a week. Won't have to worry about misalignment and measuring.

05-18-2006, 08:29 PM	#17
Ochre Registered User Join Date: Mar 2005 Location: minnesota Posts: 78	Re: Blazer Windsheild Frames. I think its definitely a step in the right direction, from what I've seen rust in the ws frame area intimidates even some bodymen and that's what causes a lot of em to get cut up...or worse, descent bodies getting cut up to patch a rustbucket



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.