Need help punching out ignition cylinder - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**crossy** · 05-11-2007, 05:42 PM

I know there are plenty of 10 year olds in the city that know how to do this , but with all my parting out I really don't have much experience with punching out the ignition. I NORMALLY avoid trucks with no keys. I need to get the ignition to turn and don't have keys. It's an 80's parts truck. SUPPOSEDLY you just drill a hole in the center and use the ears to turn it???? On TV they use a slide hammer.
somebody give me a step by step please. the truck is in a remote field so any tools will have to be hand tools or battery operated. I have pretty much any tool here. I do have a slide hammer too.
need to get the truck Sunday so need to know ASAP. thanx,crossy

05-11-2007, 05:42 PM	#1
crossy Oh,you can't buy that new Join Date: Apr 2000 Location: Pennsville,N.J. 08070, USA Posts: 2,042	Need help punching out ignition cylinder I know there are plenty of 10 year olds in the city that know how to do this , but with all my parting out I really don't have much experience with punching out the ignition. I NORMALLY avoid trucks with no keys. I need to get the ignition to turn and don't have keys. It's an 80's parts truck. SUPPOSEDLY you just drill a hole in the center and use the ears to turn it???? On TV they use a slide hammer. somebody give me a step by step please. the truck is in a remote field so any tools will have to be hand tools or battery operated. I have pretty much any tool here. I do have a slide hammer too. need to get the truck Sunday so need to know ASAP. thanx,crossy __________________ "been there, done that, ruined the T-shirt". 2007 LBZ GMC Sierra, ECSB 2006 LM7 RCSB Silverado 98 Vortec project. 94,3500,6.5L 4L80 81 SWB GMC POS finally gone 73 Pinto, stock, w/CragarSS's-eww 84,C10 SWB-Yella,stock 86 K10 SWB-Red, hopped up 305,4/S LOTS of Cummins trucks.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.