Speaker Location - The 1947 - Present Chevrolet & GMC Truck Message Board Network

donk7101 · 04-28-2002, 06:27 PM

Does anybody know a decent place to put speakers in a '69 Chevy?

case_bt · 04-28-2002, 06:32 PM

I have 2 3 way 6x9's in small boxes in front of the seat on the passenger and drivers sides no real problems except when my short wife drives it with the seat all the way up.

Mike C · 04-28-2002, 08:15 PM

Boy, is THIS a recurring topic. I have Kicker 4" components with flush tweeters in the door PANELS where replacing the panels will return it to stock. The crossovers are mounted on the kickpanels. I have a Kicker 10" free air sub in an open back "box" under the passengers seat. I use Alpine head units which are pull-outs and I have several I swap between. I also have a Crossfire 100x4 amp powering it up and an Alpine CD changer. IMO, this was the best compromise between sound and practicality (keeping the spare under the bed and tank in the cab) And yes, it sounds AWESOME!

------------------
70 GMC 3/4 ton Sierra Grande 402/TH400
72 Jimmy 4WD 4spd 4" & 35's
64 Corvette Coupe
68 Camaro 'vert TPI & TH700
69 Z/28 355 12.6's @110
72 Datsun 240Z-ol' reliable

cableguy0 · 04-28-2002, 08:47 PM

in the bottom of the doors just in front of the seat

------------------
72 chevy lwb 350 lunati cam ported and polished cast 2.02 heads proform hei edelbrock performer rpm and 750 carb balanced bottom end 9.5:1 compression ps,pb th350 with a tci 2500 stall convertor full man v-body kevlar clutches and bands as well as other goodies

Longhorn Man · 04-28-2002, 09:01 PM

cableguy...that's where mine's goin. If you cut the dash for good tunes, whats another couple of holes gonna hurt?

------------------
'69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man
I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it.
FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite.
If you need a pic posted, E-mail me at longhornmail@yahoo.com
Andy, in Columbus Ohio

WORNBRAKES · 04-29-2002, 04:08 AM

I built a consol to go over the hump. It houses 2 6x9's. I am putting 2 6 1/2 speackers in the doors and thinking about a 8'' sub under the seat. This is all in the works but it is the most practical thing that I could think of.

Edmond · 04-29-2002, 04:18 AM

Maybe we should make an FAQ page

Things like speakers and gastank replacement
are a few of these q's that come by every few weeks

Cya,
Edmond

------------------
1971 Chevy C/20 Longhorn, 350/TH400,
Edelbrock Victor Jr., Holley 750 cfm

1974 Chevy Camaro Z28 (Original)

1987 VW Golf 1.8i

1983 Yamaha XS650 Heritage Special (Wife's bike)
-------------------------
Capelle a/d IJssel,
The Netherlands
http://home.hetnet.nl/~epw-awes/index.html

04-28-2002, 06:27 PM	#1
donk7101 Registered User Join Date: Apr 2002 Location: Winner, SD, 57580 Posts: 1	Speaker Location Does anybody know a decent place to put speakers in a '69 Chevy?

04-28-2002, 08:15 PM	#3
Mike C Registered User Join Date: Dec 1999 Location: Austin, TX, USA Posts: 7,728	Boy, is THIS a recurring topic. I have Kicker 4" components with flush tweeters in the door PANELS where replacing the panels will return it to stock. The crossovers are mounted on the kickpanels. I have a Kicker 10" free air sub in an open back "box" under the passengers seat. I use Alpine head units which are pull-outs and I have several I swap between. I also have a Crossfire 100x4 amp powering it up and an Alpine CD changer. IMO, this was the best compromise between sound and practicality (keeping the spare under the bed and tank in the cab) And yes, it sounds AWESOME! ------------------ 70 GMC 3/4 ton Sierra Grande 402/TH400 72 Jimmy 4WD 4spd 4" & 35's 64 Corvette Coupe 68 Camaro 'vert TPI & TH700 69 Z/28 355 12.6's @110 72 Datsun 240Z-ol' reliable __________________ 44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax

04-28-2002, 08:47 PM	#4
cableguy0 Senior Member Join Date: Apr 2000 Location: Delta,Pa Posts: 14,948	in the bottom of the doors just in front of the seat ------------------ 72 chevy lwb 350 lunati cam ported and polished cast 2.02 heads proform hei edelbrock performer rpm and 750 carb balanced bottom end 9.5:1 compression ps,pb th350 with a tci 2500 stall convertor full man v-body kevlar clutches and bands as well as other goodies __________________ Owner of North Point Car Care in Dundalk Md. We specialize in custom exhaust on both modern and classic vehicles. We are a full service auto shop from classics to modern vehicles. Feel free to contact me with questions. I will give a 10% discount to any board member.

04-29-2002, 04:08 AM	#6
WORNBRAKES Senior Member Join Date: Jul 2001 Location: Hughesville, MD Posts: 1,350	I built a consol to go over the hump. It houses 2 6x9's. I am putting 2 6 1/2 speackers in the doors and thinking about a 8'' sub under the seat. This is all in the works but it is the most practical thing that I could think of. __________________ Mario and Mandy Hughesville, MD 20637 69 C10 305/350 71 K5 Basket case 75 K10 Rescue Parting out 77 MG Midget Parting out 15 6.7L Cummins

04-29-2002, 04:18 AM	#7
Edmond Registered User Join Date: Jan 2000 Location: The Netherlands Posts: 1,063	Maybe we should make an FAQ page Things like speakers and gastank replacement are a few of these q's that come by every few weeks Cya, Edmond ------------------ 1971 Chevy C/20 Longhorn, 350/TH400, Edelbrock Victor Jr., Holley 750 cfm 1974 Chevy Camaro Z28 (Original) 1987 VW Golf 1.8i 1983 Yamaha XS650 Heritage Special (Wife's bike) ------------------------- Capelle a/d IJssel, The Netherlands http://home.hetnet.nl/~epw-awes/index.html __________________ 1971 Chevy C/20 Longhorn, 350/TH400, Edelbrock Performer, IMPCO 425 LPG Carb 1974 Chevy Camaro Z28 (Original) ------------------------- The Netherlands

04-28-2002, 06:32 PM	#2
case_bt Registered User Join Date: Jan 2002 Location: willis tx Posts: 374	I have 2 3 way 6x9's in small boxes in front of the seat on the passenger and drivers sides no real problems except when my short wife drives it with the seat all the way up.

04-28-2002, 09:01 PM	#5
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,690	cableguy...that's where mine's goin. If you cut the dash for good tunes, whats another couple of holes gonna hurt? ------------------ '69 G.M.C. 350/350. Trying to clean up the left over damage from the Dope-Smokin-Old-Man I've been dubbed the Longhorn Freak/Fanatic/Expert, I just hope I can live up to it. FINALLY got the HORNIAC...a '70 one ton Longhorn with a Pontiac 350/350 and lots of 'personality'. Check out The Longhorn Webite. If you need a pic posted, E-mail me at longhornmail@yahoo.com Andy, in Columbus Ohio



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.