Ceramic Coated Hooker Super comp headers SBC - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**way2lo2** · 10-05-2007, 03:56 PM

I have a set of small block chevy Hooker Super Comp ceramic coated headers I will be removing from my Blazer next week. They are a full length collector and don't offer the extra ground clearance I need after installing airride on a 72 Blazer. These are $679 from Summit but the ceramic coating is not perfect but not horrible either so $175+shipping or pick up @ my location in Cleveland Ohio. Pics available way2lo2@aol.com or PM me

70rs/ss · 10-05-2007, 04:53 PM

I may be in, peding picts. PM coming your way.

toomanytoyz · 10-05-2007, 04:56 PM

Mike,

Those will look Good on My New Truck

Rick

70c10 · 10-05-2007, 05:46 PM

How old are they?. The date code is stamped on the inside of the flanges.

**way2lo2** · 10-05-2007, 06:05 PM

Quote:

Originally Posted by 70c10

How old are they?. The date code is stamped on the inside of the flanges.

I'll let you know when I take them off, the new headers will be here Monday, so I should have them changed tuesday or so.
Boris

70c10 · 10-05-2007, 06:07 PM

The date code tells when they were made. Do you remember how long they have been used/installed?

**way2lo2** · 10-05-2007, 06:30 PM

Quote:

Originally Posted by 70c10

The date code tells when they were made. Do you remember how long they have been used/installed?

I've owned the truck about 2 years and the headers were on before then. I've never driven the truck since I got it other then for the first couple days of ownership.
Boris

70c10 · 10-05-2007, 07:41 PM

Thanks Boris

**way2lo2** · 10-08-2007, 05:31 PM

Quote:

Originally Posted by 70c10

The date code tells when they were made. Do you remember how long they have been used/installed?

I think they are from 95 if I'm reading the code right. I got them off today and reducing the price to $125

toomanytoyz · 10-08-2007, 08:40 PM

Put me In Line If Mike (70rs/ss ) is a Pass........

Rick

sandking · 10-08-2007, 08:47 PM

Put me next in line. Couple of questions though:

Do you have pics of the underside of the truck with these installed, do they hang below the frame rails?

What size are the tubes and the collectors?

What is the Summit part number?

70c10 · 10-08-2007, 10:13 PM

These tubes are the big boys! 1 3/4" primaries with 3" collectors. These are a little too big for my specs or I would buy them. Somebody will get a good deal even even if you have to recoat them. Here is the link to Jegs. http://www.jegs.com/webapp/wcs/store...10002_36692_-1

**way2lo2** · 10-08-2007, 10:13 PM

Quote:

Originally Posted by sandking

Put me next in line. Couple of questions though:

Do you have pics of the underside of the truck with these installed, do they hang below the frame rails?

What size are the tubes and the collectors?

What is the Summit part number?

No, I took them off today and didn't take pics but they did hang below the frame. Truck was lowered 4 inches in the front and they weren't a problem but once I installed the airride, the collector flange on the driver's side would touch the ground when it was airred out. The part # is 2840
So far no one has commited to them so they are available.
Boris

sandking · 10-08-2007, 10:44 PM

Would they fit a 4x4? What is the shipping to 92882? Thanks.

70rs/ss · 10-09-2007, 12:59 AM

Pass them onto toomanytoys, I need em like another hole in the head!!

70GMCer · 10-09-2007, 07:43 AM

Put me in line. May be interested pending shipping to 21085

**way2lo2** · 10-09-2007, 08:32 AM

Quote:

Originally Posted by sandking

Would they fit a 4x4? What is the shipping to 92882? Thanks.

$25 will cover costs

**way2lo2** · 10-09-2007, 08:33 AM

Quote:

Originally Posted by 70GMCer

Put me in line. May be interested pending shipping to 21085

$20 since your not too far

toomanytoyz · 10-09-2007, 09:03 AM

Would u Take $125.00 shipped to AZ. 86042, If so, I will Take them?

Thanks, Rick

70GMCer · 10-09-2007, 10:01 AM

Quote:

Originally Posted by way2lo2

$20 since your not too far

Sold, I'll take them for that price of $145.00 shipped......

If so, I'll pay with Paypal. PM me your address.......

71chevytruckguy · 10-15-2007, 05:04 AM

if it gets to me, put me in line. chris.

10-05-2007, 03:56 PM	#1
way2lo2 way2lo2 Join Date: Sep 2004 Location: Cleveland , Ohio Posts: 803	Ceramic Coated Hooker Super comp headers SBC I have a set of small block chevy Hooker Super Comp ceramic coated headers I will be removing from my Blazer next week. They are a full length collector and don't offer the extra ground clearance I need after installing airride on a 72 Blazer. These are $679 from Summit but the ceramic coating is not perfect but not horrible either so $175+shipping or pick up @ my location in Cleveland Ohio. Pics available way2lo2@aol.com or PM me Attached Images Last edited by way2lo2; 10-05-2007 at 05:05 PM.

10-05-2007, 04:53 PM	#2
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Ceramic Coated Hooker Super comp headers SBC I may be in, peding picts. PM coming your way.

10-05-2007, 04:56 PM	#3
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Ceramic Coated Hooker Super comp headers SBC Mike, Those will look Good on My New Truck Rick

10-05-2007, 05:46 PM	#4
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Ceramic Coated Hooker Super comp headers SBC How old are they?. The date code is stamped on the inside of the flanges. __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-05-2007, 06:07 PM	#6
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Ceramic Coated Hooker Super comp headers SBC The date code tells when they were made. Do you remember how long they have been used/installed? __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-05-2007, 07:41 PM	#8
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Ceramic Coated Hooker Super comp headers SBC Thanks Boris __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-08-2007, 08:40 PM	#10
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Ceramic Coated Hooker Super comp headers SBC Put me In Line If Mike (70rs/ss ) is a Pass........ Rick

10-08-2007, 08:47 PM	#11
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: Ceramic Coated Hooker Super comp headers SBC Put me next in line. Couple of questions though: Do you have pics of the underside of the truck with these installed, do they hang below the frame rails? What size are the tubes and the collectors? What is the Summit part number? __________________ . . . . . View my build thread HERE

10-08-2007, 10:13 PM	#12
70c10 67-72 Addict! Join Date: Feb 2002 Location: The TAX State! Posts: 7,857	Re: Ceramic Coated Hooker Super comp headers SBC These tubes are the big boys! 1 3/4" primaries with 3" collectors. These are a little too big for my specs or I would buy them. Somebody will get a good deal even even if you have to recoat them. Here is the link to Jegs. http://www.jegs.com/webapp/wcs/store...10002_36692_-1 __________________ Jim 1970 C/10 Fleetside w/Ghost Flames Lowered 4.5" front and 4" rear (Raked) 355/350 Turbo w/shift kit 10" Redneck Performance Verter w/2500 stall Hooker Super Comps part#2808-1 Performer RPM Air-Gap 12 Bolt w/3:73 gears- Eaton Posi Comp Cams XE262 with 1.6 Crane Energizers, Road Demon 625 and Brodix IK 180 heads

10-08-2007, 10:44 PM	#14
sandking .....I am working on it..... Join Date: Jul 2007 Location: Anaheim Hills, Ca Posts: 960	Re: Ceramic Coated Hooker Super comp headers SBC Would they fit a 4x4? What is the shipping to 92882? Thanks. __________________ . . . . . View my build thread HERE

10-09-2007, 12:59 AM	#15
70rs/ss Registered User Join Date: Dec 2004 Location: Northern AZ Posts: 7,271	Re: Ceramic Coated Hooker Super comp headers SBC Pass them onto toomanytoys, I need em like another hole in the head!!

10-09-2007, 07:43 AM	#16
70GMCer Senior Member Join Date: Apr 2005 Location: Joppa, Maryland Posts: 4,408	Re: Ceramic Coated Hooker Super comp headers SBC Put me in line. May be interested pending shipping to 21085 __________________ 1997 GMC Sierra Ext 1965 Mustang

10-09-2007, 09:03 AM	#19
toomanytoyz Luv the Crewcabs Join Date: Aug 2006 Location: Andrews, In. 46702 Posts: 4,097	Re: Ceramic Coated Hooker Super comp headers SBC Would u Take $125.00 shipped to AZ. 86042, If so, I will Take them? Thanks, Rick

10-15-2007, 05:04 AM	#21
71chevytruckguy Registered User Join Date: Jul 2005 Location: Kernersville, NC Posts: 599	Re: Ceramic Coated Hooker Super comp headers SBC if it gets to me, put me in line. chris. __________________ its a work in progess. 71 c-10 lwb, in the middle of frame off restoration. 69 c-10 swb, drag truck, 406 sbc, balanced, comp 292 cam, ported, polished, gasket matched, and bowl blended pro comp 210cc heads, 2.02/1.60 ferrea valves,1.6 roller rockers, re curved hei with msd 6al box, 2-step rev limter, accel 300+ wires, ported victor jr intake, holley 750 double pumper carb, dynomax 1 5/8 headers, 4 spd munci m-20 with super case and iron midplate, mr. gasket vertigate shifter, 5.38 pro gears with full spool, 33 spline moser axles and c-clip elimators, line-loc, 5 gal fuel cell, holley blue pump. 7.807 @ 88.37mph 1.60 60FT 80 g-20 van, tow rig, cammed 305, th350, 10 bolt 88 jeep wrangler, dd, 258, ax-15 swap, 4.5" lift, 33x12.50's, lockers, 3.55's



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.