Lets see those stereo pics - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1971ChevyTruck · 10-20-2007, 02:11 AM

Anyone have any creative ideas of what to do with the stock radio?? Anyone cut into it and mount a CD player??

**Boog** · 10-20-2007, 07:04 AM

You might get more response down in the Truck Audio forum.

see ten · 10-20-2007, 07:45 AM

It seems like there's a write up where a member built one to control an mp3 player. I thought it would be neat if you could use one to control airbag pressure/height.

Low&Slow83 · 11-28-2007, 09:55 PM

i cut out mine and made a nice hole for an aftermarket CD player. ive done it to my 83 and someone elses 87. not too hard. looks pretty clean too

70' GMC · 11-29-2007, 10:07 PM

cassette stereo and a cassette adaptor and a fairly decent mp3 player with 1GB to 4 will be perfect. thats what I done and got speakers in my glovebox

AceX · 11-30-2007, 03:47 AM

70' GMC · 11-30-2007, 04:12 PM

ace x got any more pics with your stereo???

JAKES 68GMC · 11-30-2007, 05:42 PM

I cut the dash to put a CD player in my truck. Where I cut it out didnt look too good, but with the radio in, it looks fine, you can't even tell I cut the dash.

D-Day · 12-14-2007, 04:16 AM

Some before pics of my bangaround crap system which drove me to madness more than once...

Yes, that is a 70's LP record player speaker. 8 watts of power, baby.

The head unit was done in 2006 before I could upgrade the rest of the system this year.

Radio tuned to a weather frequency using a Kenwood add-on module.

Alpine 70 watt RMS component speakers in Q-Logic kick panels. Alpine 90 watt RMS coaxials in the rear cab corners (crew cab). No pics of these or the amp. Stinger hardware wiring, connections and amp install kit used. Go Stinger, always.

Amp is an Alpine MRP-F550. Great amp, lots of power. I also have Sirius hooked up. I can deafen myself easily if I so choose.

Yes, the carpet is duct taped, because I had to rip it at one point. These pics were taken right after install.

Magnuman · 12-14-2007, 09:30 AM

Which Q Logic Kick Panels are those?

D-Day · 12-14-2007, 11:38 AM

I don't have the paper with me that came with 'em offhand to give you the exact model number, but I bought them from an eBay listing, this being the model and price: http://cgi.ebay.com/ebaymotors/Q-Log...sid=p1638.m118

The model for my truck is a slightly different number if I recall, and if you buy from Q-Logic they're $150+. Being the eBay hawk I am, I took a gamble with the Blazer ones since I figured the cab dimensions would have been identical for those years (my truck is a 1973), and it worked.

My component speakers were 6 1/2" though, and wouldn't fit in there properly like the right set of component speakers would. So I took a piece of garden hose, wrapped it around the inside of the enclosure (yet with a hole cut big enough in the speaker blanks for the speakers to squeak through), and screwed it into that. Worked like a charm, provides a nice cushion/absorbing effect, too.

So if you go the garden hose route, you could fit the 6 1/2" in those with a little craftwork. Since the new 6 1/2" Q-Logic panels cost around $150, and I'm not sure if they've made the bigger ones for all years and makes yet.

D-Day · 12-14-2007, 11:44 AM

Ah ha, I found an alternate picture in which you can see how the garden hose trick is utilized on the right side speaker.

As you can see, since the 6 1/2" wouldn't fit down in there like it's supposed to (because I had bought the wrong component set; should have been smaller), I used the garden hose to sort of lift it up a little bit, so it sits on the outer part of the enclosure ring.

10-20-2007, 02:11 AM	#1
1971ChevyTruck Registered User Join Date: Jan 2005 Location: Illinois Posts: 1,006	Lets see those stereo pics Anyone have any creative ideas of what to do with the stock radio?? Anyone cut into it and mount a CD player??

10-20-2007, 07:04 AM	#2
Boog laying low Join Date: Mar 2001 Location: Searcy, Ark. USA Posts: 13,513	Re: Lets see those stereo pics You might get more response down in the Truck Audio forum. __________________ Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross

10-20-2007, 07:45 AM	#3
see ten WTB this ad Join Date: Sep 2004 Location: Lafayette Georgia Posts: 5,074	Re: Lets see those stereo pics It seems like there's a write up where a member built one to control an mp3 player. I thought it would be neat if you could use one to control airbag pressure/height.

11-28-2007, 09:55 PM	#4
Low&Slow83 Registered User Join Date: Nov 2007 Location: Jacksonville, Florida Posts: 109	Re: Lets see those stereo pics i cut out mine and made a nice hole for an aftermarket CD player. ive done it to my 83 and someone elses 87. not too hard. looks pretty clean too

11-29-2007, 10:07 PM	#5
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: Lets see those stereo pics cassette stereo and a cassette adaptor and a fairly decent mp3 player with 1GB to 4 will be perfect. thats what I done and got speakers in my glovebox __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

11-30-2007, 03:47 AM	#6
AceX >130dB Moderator Join Date: Aug 2006 Location: Sacramento, CA Posts: 2,130	Re: Lets see those stereo pics __________________ Living Life @ 130dB LED Tail Light Conversion; How-to Friend. Father. Brother. RIP El Jay ------------------------------------------------------------------------------------------------------------------------- CLICK HERE and for less than $0.07 a day, you too can help support and build a better forum.

11-30-2007, 04:12 PM	#7
70' GMC HERE.......Somewhere Join Date: Oct 2006 Location: Birmingham AL Posts: 2,488	Re: Lets see those stereo pics ace x got any more pics with your stereo??? __________________ Current rides: 2013 Hyundai elantra gt DD 1995 camaro my first crush lmao Was: 1970 with a 350 4barrel and 288 horses Classics make it possible!

11-30-2007, 05:42 PM	#8
JAKES 68GMC Aluminum slot wheels rule... Join Date: Jan 2006 Location: Maine Posts: 6,211	Re: Lets see those stereo pics I cut the dash to put a CD player in my truck. Where I cut it out didnt look too good, but with the radio in, it looks fine, you can't even tell I cut the dash.

12-14-2007, 04:16 AM	#9
D-Day Live fast, die young Join Date: Sep 2006 Location: Northwest Ohio Posts: 293	Re: Lets see those stereo pics Some before pics of my bangaround crap system which drove me to madness more than once... Yes, that is a 70's LP record player speaker. 8 watts of power, baby. The head unit was done in 2006 before I could upgrade the rest of the system this year. Radio tuned to a weather frequency using a Kenwood add-on module. Alpine 70 watt RMS component speakers in Q-Logic kick panels. Alpine 90 watt RMS coaxials in the rear cab corners (crew cab). No pics of these or the amp. Stinger hardware wiring, connections and amp install kit used. Go Stinger, always. Amp is an Alpine MRP-F550. Great amp, lots of power. I also have Sirius hooked up. I can deafen myself easily if I so choose. Yes, the carpet is duct taped, because I had to rip it at one point. These pics were taken right after install. Last edited by D-Day; 12-14-2007 at 04:19 AM.

12-14-2007, 09:30 AM	#10
Magnuman Registered User Join Date: Nov 2007 Location: San Francisco,CA Posts: 130	Re: Lets see those stereo pics Which Q Logic Kick Panels are those?

12-14-2007, 11:38 AM	#11
D-Day Live fast, die young Join Date: Sep 2006 Location: Northwest Ohio Posts: 293	Re: Lets see those stereo pics I don't have the paper with me that came with 'em offhand to give you the exact model number, but I bought them from an eBay listing, this being the model and price: http://cgi.ebay.com/ebaymotors/Q-Log...sid=p1638.m118 The model for my truck is a slightly different number if I recall, and if you buy from Q-Logic they're $150+. Being the eBay hawk I am, I took a gamble with the Blazer ones since I figured the cab dimensions would have been identical for those years (my truck is a 1973), and it worked. My component speakers were 6 1/2" though, and wouldn't fit in there properly like the right set of component speakers would. So I took a piece of garden hose, wrapped it around the inside of the enclosure (yet with a hole cut big enough in the speaker blanks for the speakers to squeak through), and screwed it into that. Worked like a charm, provides a nice cushion/absorbing effect, too. So if you go the garden hose route, you could fit the 6 1/2" in those with a little craftwork. Since the new 6 1/2" Q-Logic panels cost around $150, and I'm not sure if they've made the bigger ones for all years and makes yet.

12-14-2007, 11:44 AM	#12
D-Day Live fast, die young Join Date: Sep 2006 Location: Northwest Ohio Posts: 293	Re: Lets see those stereo pics Ah ha, I found an alternate picture in which you can see how the garden hose trick is utilized on the right side speaker. As you can see, since the 6 1/2" wouldn't fit down in there like it's supposed to (because I had bought the wrong component set; should have been smaller), I used the garden hose to sort of lift it up a little bit, so it sits on the outer part of the enclosure ring.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.