Project "Olive" 67 stepper... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

c10addict · 04-16-2009, 01:18 PM

Well I don't have pics from the very start of this project but it is still very much of a project so here goes... Before I bought the 64 I was wanting a shop truck/rat and had just about enough parts laying around to build a complete truck.. All I needed was a frame and a title... I went on craigslist and bought a complete truck for $600.00... So the project begins... I wanted to build an Army themed truck.. Olive green with little twists here and there.. The original plan was to throw a big block I have in it but I am now leaning towards a 350/700r4 I have... I got my hands on a Vortech supercharger and want to build the big block around that.... Here are some pics... The pile of junk parts are whats left of the truck I bought for the frame and title... The dash is my creation... I was thinking Army jeeps have the speedo in the middle of the dash so.... KP notch in the rear and I Z'd the frame 3" in the front and am running drop spindles and a 73 up crossmember as well...

c10addict · 04-16-2009, 01:19 PM

I was originally going to run steel 20"s from a ram but would not work with the stepside bed.... Here are more pics..

c10addict · 04-16-2009, 01:25 PM

More pics... Cab is very clean... just surface rust here and there due to being stored in a damp shed.. Long story pi$$ed me off!!! Motor was a strong runner out of a 72 4x4 I bought for parts... It will get torn apart cleaned up and painted.. I decided to go tan with the wheels but am going to run a polished COPO style dog dish.. The pics of it sitting outside were before the Z'd frame.. Lastly F-Bomb was my inspiration for the olive green Army theme... Stay tuned for more!!

72BlckButy · 04-16-2009, 02:36 PM

c10addict.... this is going to be one killer project (no military pun intended).

Best of luck, and I can't wait to see how it turns out.

c10addict · 04-16-2009, 09:04 PM

found a few more pics of the notch and bag set up... plus a few of my 68 when it was a project since I never had a build thread for it...

nuke1 · 04-17-2009, 12:47 AM

i like the idea based around the F-Bomb camaro, but if you likethat car, do not watch the new fast and the furious, i repeat DO NOT, they destroy it in there, i cringed really bad. and cried a little too.

c10addict · 04-17-2009, 01:14 PM

Quote:

Originally Posted by nuke1

i like the idea based around the F-Bomb camaro, but if you likethat car, do not watch the new fast and the furious, i repeat DO NOT, they destroy it in there, i cringed really bad. and cried a little too.

No way man... Its cool... They were all movie cars... The original is still ok... Check this out.. Here is one on e-bay for sale from the movie..

http://cgi.ebay.com/ebaymotors/Chevr...fCarsQ5fTrucks

OARNGESI · 01-13-2010, 09:47 AM

Any progress

c10addict · 01-13-2010, 10:05 AM

Quote:

Originally Posted by OARNGESI

Any progress

None..... Trying to get my 54 GMC done first.... Been a busy winter so far...

OARNGESI · 01-14-2010, 04:23 PM

Is the air bags in the rear the same as they are on your 64

c10addict · 01-14-2010, 05:34 PM

Quote:

Originally Posted by OARNGESI

Is the air bags in the rear the same as they are on your 64

yep.. same set up

stepside83 · 02-04-2010, 01:06 AM

cant wait to see more of this build looks awesome already and i love the armt thaem for as i am in the army reserves

so thanks

franky69c10 · 02-04-2010, 02:02 AM

What size if tires do u have on the steelie and what kind of adaptor r u use'n 2 make those wheels work on ur truck

Ghostwhite · 05-09-2010, 10:03 PM

Quote:

Originally Posted by franky69c10

What size if tires do u have on the steelie and what kind of adaptor r u use'n 2 make those wheels work on ur truck

+1

I know you are not using these anymore but am wondering about them. I like the simplicity and availability. What issues did you have and what adapters?

stepside83 · 01-29-2012, 06:37 PM

deff a cool build cant wait to see you get back on this one

c10addict · 01-30-2012, 09:22 AM

Now that my 54 is just about done Im ready to get on this one!!!

duallyjams · 02-14-2012, 08:50 AM

subscribe

stepside83 · 10-28-2012, 02:50 PM

any progress on this truck? def looking forward to seeing more, im curently coming up with a plan to do this with my 83 stepside

c10addict · 11-29-2012, 07:48 AM

Ok time to get this project done! Im back on it and excited to get it done! Here are a few pics of what I have goin on with it! I painted the doors and did the artwork on them... I scored some military taillights that I am going to run but I will move them around and sink them in to the side of the bed a little and I am messing around with a few different dog dish ideas... Stay tuned!

duallyjams · 11-29-2012, 08:42 AM

back to life

VA72C10 · 11-29-2012, 01:18 PM

Cool! Glad you're back on it and love that cap idea!
Posted via Mobile Device

**67cheby** · 11-29-2012, 01:20 PM

Awesome, cant wait to see all of your new plans !

Rusbuilt · 11-29-2012, 01:21 PM

Cool build!

Jimbabwe · 11-30-2012, 09:49 PM

Nice! Glad to see you're back on it. I am lovin' those taillights.

Congrats on the '54 in (Custom?) Classic Trucks, if you still own it, and I can't see why you wouldn't!

**thelonerife** · 12-01-2012, 12:48 AM

Cool! You need one of these in a 67 year.

04-16-2009, 01:18 PM	#1
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Project "Olive" 67 stepper... Well I don't have pics from the very start of this project but it is still very much of a project so here goes... Before I bought the 64 I was wanting a shop truck/rat and had just about enough parts laying around to build a complete truck.. All I needed was a frame and a title... I went on craigslist and bought a complete truck for $600.00... So the project begins... I wanted to build an Army themed truck.. Olive green with little twists here and there.. The original plan was to throw a big block I have in it but I am now leaning towards a 350/700r4 I have... I got my hands on a Vortech supercharger and want to build the big block around that.... Here are some pics... The pile of junk parts are whats left of the truck I bought for the frame and title... The dash is my creation... I was thinking Army jeeps have the speedo in the middle of the dash so.... KP notch in the rear and I Z'd the frame 3" in the front and am running drop spindles and a 73 up crossmember as well... Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

04-16-2009, 01:19 PM	#2
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Olive" 67 stepper... I was originally going to run steel 20"s from a ram but would not work with the stepside bed.... Here are more pics.. Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile Last edited by c10addict; 04-16-2009 at 01:20 PM.

04-16-2009, 01:25 PM	#3
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Olive" 67 stepper... More pics... Cab is very clean... just surface rust here and there due to being stored in a damp shed.. Long story pi$$ed me off!!! Motor was a strong runner out of a 72 4x4 I bought for parts... It will get torn apart cleaned up and painted.. I decided to go tan with the wheels but am going to run a polished COPO style dog dish.. The pics of it sitting outside were before the Z'd frame.. Lastly F-Bomb was my inspiration for the olive green Army theme... Stay tuned for more!! Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

04-16-2009, 02:36 PM	#4
72BlckButy Tot Roddin' Join Date: Apr 2005 Location: Mid-MO Posts: 24,461	Re: Project "Olive" 67 stepper... c10addict.... this is going to be one killer project (no military pun intended). Best of luck, and I can't wait to see how it turns out. __________________ -Nate 1969 CST SWB - Project Blank Slate (4.5/6" ECE Static Drop, 6-lug disc brake upgrade (manual), Billet Specialties Vintec 20x8.5 255/40 (F) 20x10 295/40 (R), 250 I-6) 1960 AMF Skylark - Tot Roddin' (Lowered with custom frame; soon to include custom push bar and interior) 2008 Silverado CrewCab 1LT (5.3L, 3:73, 4x4, LT1, Z-71, Towing Package)

04-16-2009, 09:04 PM	#5
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Olive" 67 stepper... found a few more pics of the notch and bag set up... plus a few of my 68 when it was a project since I never had a build thread for it... Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

04-17-2009, 12:47 AM	#6
nuke1 Registered User Join Date: Jun 2007 Location: Saskatoon, Saskatchewan,: Posts: 2,901	Re: Project "Olive" 67 stepper... i like the idea based around the F-Bomb camaro, but if you likethat car, do not watch the new fast and the furious, i repeat DO NOT, they destroy it in there, i cringed really bad. and cried a little too. __________________ James 1968 GMC "HAVOC" 1986 GMC "Frank" J.J.R.H. Design & Consulting My 68`Rebuild "HAVOC": http://67-72chevytrucks.com/vboard/s...d.php?t=316300 A 58' chev build thread: http://www.67-72chevytrucks.com/vboa...d.php?t=311238 1969 Camaro Pro Touring http://67-72chevytrucks.com/vboard/s...61#post3513361 Swiss Cheese: http://67-72chevytrucks.com/vboard/s...d.php?t=384390 Adjustable Trailing Arm How-To: http://67-72chevytrucks.com/vboard/s...d.php?t=321100 1968 Ford Farm Truck: http://67-72chevytrucks.com/vboard/s...=1#post6555587

01-13-2010, 09:47 AM	#8
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Project "Olive" 67 stepper... Any progress __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

01-14-2010, 04:23 PM	#10
OARNGESI Registered User Join Date: Sep 2008 Location: CASA GRANDE AZ Posts: 4,276	Re: Project "Olive" 67 stepper... Is the air bags in the rear the same as they are on your 64 __________________ 70 SWB STEPSIDE 70 BLAZER 09 challenger

02-04-2010, 01:06 AM	#12
stepside83 Registered User Join Date: Jan 2010 Location: butler pa Posts: 328	Re: Project "Olive" 67 stepper... cant wait to see more of this build looks awesome already and i love the armt thaem for as i am in the army reserves so thanks

02-04-2010, 02:02 AM	#13
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: Project "Olive" 67 stepper... What size if tires do u have on the steelie and what kind of adaptor r u use'n 2 make those wheels work on ur truck __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

01-29-2012, 06:37 PM	#15
stepside83 Registered User Join Date: Jan 2010 Location: butler pa Posts: 328	Re: Project "Olive" 67 stepper... deff a cool build cant wait to see you get back on this one

01-30-2012, 09:22 AM	#16
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Olive" 67 stepper... Now that my 54 is just about done Im ready to get on this one!!! __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile

02-14-2012, 08:50 AM	#17
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Project "Olive" 67 stepper... subscribe __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

10-28-2012, 02:50 PM	#18
stepside83 Registered User Join Date: Jan 2010 Location: butler pa Posts: 328	Re: Project "Olive" 67 stepper... any progress on this truck? def looking forward to seeing more, im curently coming up with a plan to do this with my 83 stepside

11-29-2012, 07:48 AM	#19
c10addict Registered User Join Date: Aug 2007 Location: pittsburgh pa Posts: 1,970	Re: Project "Olive" 67 stepper... Ok time to get this project done! Im back on it and excited to get it done! Here are a few pics of what I have goin on with it! I painted the doors and did the artwork on them... I scored some military taillights that I am going to run but I will move them around and sink them in to the side of the bed a little and I am messing around with a few different dog dish ideas... Stay tuned! Attached Images __________________ 68 C10 Shorty TPI,Bagged, and all the good stuff. Classic trucks feature June 06, On the cover of Jegs Christmas Catalog 08 67 C10 Shorty Shop truck project Bagged and Z'd under destruction and getting nowhere fast. 64 C10 Shop Truck/Daily driver, Bagged, Dropmember, SOLD!!!! Gone but not forgotten.. 54 GMC under the knife getting a S10 chassis swap and bagged. See my build thread... 07 GMC Sierra 5/7 drop, 22's and 24's Air ride on my mind.. http://67-72chevytrucks.com/vboard/s...d.php?t=339340 See pics of my trucks in my profile



Register or Log In To remove these advertisements.

11-29-2012, 08:42 AM	#20
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Project "Olive" 67 stepper... back to life __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

11-29-2012, 01:18 PM	#21
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Project "Olive" 67 stepper... Cool! Glad you're back on it and love that cap idea! Posted via Mobile Device __________________ Looking for a 67-72 swb or blazer project in or around VA.

11-29-2012, 01:20 PM	#22
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project "Olive" 67 stepper... Awesome, cant wait to see all of your new plans ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-29-2012, 01:21 PM	#23
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Project "Olive" 67 stepper... Cool build! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

11-30-2012, 09:49 PM	#24
Jimbabwe Registered User Join Date: Dec 2011 Location: New York City Posts: 648	Re: Project "Olive" 67 stepper... Nice! Glad to see you're back on it. I am lovin' those taillights. Congrats on the '54 in (Custom?) Classic Trucks, if you still own it, and I can't see why you wouldn't!

12-01-2012, 12:48 AM	#25
thelonerife Senior Member Join Date: Jul 2007 Location: Clarksville TN 37043 Posts: 8,702	Re: Project "Olive" 67 stepper... Cool! You need one of these in a 67 year. Attached Images __________________ Chuck 68swb Fleetside build ''Choncho'' http://67-72chevytrucks.com/vboard/s...d.php?t=374892 My trailer redo http://67-72chevytrucks.com/vboard/s...69#post5893869 Chuy my 59 bug http://67-72chevytrucks.com/vboard/s...d.php?t=653798 Putnam 87 GMC Shop truck http://67-72chevytrucks.com/vboard/s...d.php?t=707687

Register or Log In To remove these advertisements.