WTB - 8 lug wheel... need ASAP - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rippin-J · 09-25-2009, 08:03 PM

Hey everyone. sorry to pollute the regional page with business matters, but I am in desperate need of a matching 8-lug wheel for my c20. had a bad mishap with a uhaul trailer earlier this summer, and it left me down one wheel. including a couple pics of the busted wheel.

any leads or help much appreciated.

rlm316 · 09-28-2009, 07:08 AM

What is the size of the rim?

Hottrucks · 09-28-2009, 07:56 AM

I bet you caould straighten that one enough with a BFH to get the tire to seal until you find one?? I have beat them worse than that so they hold air....it wont be real pretty but it will work and then you'll have a spare

Rippin-J · 09-28-2009, 08:05 AM

Quote:

Originally Posted by rlm316

What is the size of the rim?

you know, I am not entirely sure. i'll check this evening and report back.

Quote:

Originally Posted by Hottrucks

I bet you caould straighten that one enough with a BFH to get the tire to seal until you find one?? I have beat them worse than that so they hold air....it wont be real pretty but it will work and then you'll have a spare

maybe a dumb question, but what is a BFH? wonder if a tire shop could do it?? I may try that until something else comes up. can't be any worse than the 42 year old spare tire I'm using now!

Thanks guys.

**special-K** · 09-28-2009, 08:06 AM

Is it a 16.5,8.25 or 9.75?

Rippin-J · 09-28-2009, 08:08 AM

Quote:

Originally Posted by special-K

Is it a 16.5,8.25 or 9.75?

if there are two choices, and the stock ones were thinner, then it is a 9.75. The BF tires that are one there (and on busted wheel) are about 1.5-2" wider than the spare tire is...

reading your comment more clearly the second time... it is def NOT a 16.5. and because of my above remark I speculate it is a 9.75. I can/will confirm this evening.

thanks.

Hottrucks · 09-28-2009, 08:39 AM

BFH = big f'n Hammer...a dead blow would work best also I use a very large adjustable clamp it down on steel parts and use the leveage to bend it back ..alittle heat may not hurt

Longhorn321 · 09-28-2009, 09:35 AM

Jordan,
You mentioned in the GOG thread that you were running your spare. Is the spare wheel the right size? Do you need wheel and tire or just wheel?
In regards to the size...go read the numbers off the side wall. The 9.75 does not refer to the same thing that the 16.5 refers to. If it is a 9.75 then it is prolly a 16.5 X 9.75. If it's not a 16.5, it may be something like a 235/85 R16.

JimmyFloyd · 09-28-2009, 10:44 AM

Once you find out the size, let me know. If the tires and rims I am looking at will work to hold my suburban up, I might consider selling one of the rims. Not sure what size I have yet, but can check this week sometime. Shipping might be a pain

Rippin-J · 09-28-2009, 12:42 PM

Quote:

Originally Posted by Longhorn321

Jordan,
You mentioned in the GOG thread that you were running your spare. Is the spare wheel the right size? Do you need wheel and tire or just wheel?
In regards to the size...go read the numbers off the side wall. The 9.75 does not refer to the same thing that the 16.5 refers to. If it is a 9.75 then it is prolly a 16.5 X 9.75. If it's not a 16.5, it may be something like a 235/85 R16.

Hey there Longhorn! I just need the wheel, I think the tire is okay. Eventually I will need to replace all four (five with spare), but no $$ right now for that! so 16.5 is the OD of the rim and 9.75 the width I assume?

in any case, I'll check them out in a few hours and report back tonight.

Longhorn321 · 09-28-2009, 12:45 PM

Quote:

Originally Posted by Rippin-J

so 16.5 is the OD of the rim and 9.75 the width I assume?

.

That is correct.

**special-K** · 09-28-2009, 07:06 PM

Sorry I wasn`t clear.The wide wheels that these trucks ran were 16.5" diameter and available in two widths,8.25" and 9.75".The size should be stamped into the rim.Maybe some weren`t.More recently there are custom built 16" diameter wheels offered in 8" and 10" width by companies like Stockton Wheel.

Rippin-J · 09-28-2009, 10:24 PM

Wheels are all stamped Dot "T" 16x6.5 L

not sure that that does to help us...

Longhorn321 · 09-28-2009, 11:38 PM

Quote:

Originally Posted by Rippin-J

Wheels are all stamped Dot "T" 16x6.5 L

not sure that that does to help us...

What does the tire say?

**special-K** · 09-29-2009, 06:29 AM

Oh OK,those are standard factory or factory-type wheels.They are much easier to find,yet have not been used for many years.It looked wider in the picture.They are heavy to ship,but you may get one offered as cheap as free.

Rippin-J · 09-29-2009, 09:31 AM

Quote:

Originally Posted by Longhorn321

What does the tire say?

BFGs - P25/75 R16

Longhorn321 · 09-29-2009, 09:47 AM

I will try to remember to look tonight when I get home but I may have one.

Rippin-J · 09-29-2009, 11:19 AM

Quote:

Originally Posted by Longhorn321

I will try to remember to look tonight when I get home but I may have one.

69lemans · 09-29-2009, 03:08 PM

This truck is in the new pullapart on Whitehorse Road in Greenville,SC. Maybe a Greenville member could check it out in the next day or so and see if there is a wheel in it somewhere. I'd do it for you but I'm going to be tied up the next few days and won't get a chance

gcburdic · 09-29-2009, 06:59 PM

OMG....Is that grill any good?!?!...I'd be interested in that!!!

Longhorn321 · 09-29-2009, 11:32 PM

Quote:

Originally Posted by Longhorn321

I will try to remember to look tonight when I get home but I may have one.

Well I forgot. I'll try to remember tomorrow night. Sorry.

69lemans · 09-30-2009, 01:27 AM

"OMG....Is that grill any good?!?!...I'd be interested in that!!! "

Best I can remember it has a small bung in the center on the bottom just above the bumper. Not bad though

Rippin-J · 09-30-2009, 10:13 AM

Quote:

Originally Posted by 69lemans

This truck is in the new pullapart on Whitehorse Road in Greenville,SC. Maybe a Greenville member could check it out in the next day or so and see if there is a wheel in it somewhere. I'd do it for you but I'm going to be tied up the next few days and won't get a chance

you know anyone in particular I should speak with?

Longhorn, no prob, let me know when you can.

I went to a couple of shops yesterday and they each told me that they couldn't 'repair' the busted wheel because the bent part extends onto the bead, which 'will never be trued again.'

the hunt continues...

Longhorn321 · 09-30-2009, 05:42 PM

Jordan,

I have 5 wheels to go on the '76. I just looked and I have 3 that are 16 X 6, 1 that is 16 X 7 and 1 that is 16 X 8.5. Looks like I need some help too. What size is your spare? Maybe we can do some trading?
Dwayne

Rippin-J · 09-30-2009, 09:40 PM

Quote:

Originally Posted by Longhorn321

Jordan,

I have 5 wheels to go on the '76. I just looked and I have 3 that are 16 X 6, 1 that is 16 X 7 and 1 that is 16 X 8.5. Looks like I need some help too. What size is your spare? Maybe we can do some trading?
Dwayne

spare is 16x6x6 (not sure what the last x6 is for but that's how it's stamped)

we've got a mixed batch!

09-25-2009, 08:03 PM	#1
Rippin-J OurLadyofBlessedAccelerat ion Join Date: Aug 2007 Location: Denver, CO Posts: 148	WTB - 8 lug wheel... need ASAP Hey everyone. sorry to pollute the regional page with business matters, but I am in desperate need of a matching 8-lug wheel for my c20. had a bad mishap with a uhaul trailer earlier this summer, and it left me down one wheel. including a couple pics of the busted wheel. any leads or help much appreciated. Attached Images __________________ _______________________________________________ 1968 Chevy C-20 w/ 396 1997 HD Sportster 1200 street tracker 1994 Chevy 1500 Silverado

09-28-2009, 07:08 AM	#2
rlm316 Registered User Join Date: Aug 2006 Location: Woodstown, NJ Posts: 669	Re: WTB - 8 lug wheel... need ASAP What is the size of the rim?

09-28-2009, 07:56 AM	#3
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: WTB - 8 lug wheel... need ASAP I bet you caould straighten that one enough with a BFH to get the tire to seal until you find one?? I have beat them worse than that so they hold air....it wont be real pretty but it will work and then you'll have a spare

09-28-2009, 08:06 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WTB - 8 lug wheel... need ASAP Is it a 16.5,8.25 or 9.75? __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-28-2009, 08:39 AM	#7
Hottrucks Redefining LowBudget Join Date: Mar 2009 Location: lebanon Cow Hampshire Posts: 4,538	Re: WTB - 8 lug wheel... need ASAP BFH = big f'n Hammer...a dead blow would work best also I use a very large adjustable clamp it down on steel parts and use the leveage to bend it back ..alittle heat may not hurt

09-28-2009, 09:35 AM	#8
Longhorn321 Size Matters Join Date: Aug 2007 Location: Lyman, SC Posts: 9,189	Re: WTB - 8 lug wheel... need ASAP Jordan, You mentioned in the GOG thread that you were running your spare. Is the spare wheel the right size? Do you need wheel and tire or just wheel? In regards to the size...go read the numbers off the side wall. The 9.75 does not refer to the same thing that the 16.5 refers to. If it is a 9.75 then it is prolly a 16.5 X 9.75. If it's not a 16.5, it may be something like a 235/85 R16. __________________ "Reading the owners manual is only for quitters." Jason Harper, Bloomberg News. ...WOOOO HOOOO!!!!

09-28-2009, 10:44 AM	#9
JimmyFloyd Registered User Join Date: Apr 2009 Location: Rochester, NY Posts: 1,458	Re: WTB - 8 lug wheel... need ASAP Once you find out the size, let me know. If the tires and rims I am looking at will work to hold my suburban up, I might consider selling one of the rims. Not sure what size I have yet, but can check this week sometime. Shipping might be a pain __________________ 1970 Blazer 350/SM465/205 SOLD! \| 1998 Z3

09-28-2009, 07:06 PM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WTB - 8 lug wheel... need ASAP Sorry I wasn`t clear.The wide wheels that these trucks ran were 16.5" diameter and available in two widths,8.25" and 9.75".The size should be stamped into the rim.Maybe some weren`t.More recently there are custom built 16" diameter wheels offered in 8" and 10" width by companies like Stockton Wheel. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-28-2009, 10:24 PM	#13
Rippin-J OurLadyofBlessedAccelerat ion Join Date: Aug 2007 Location: Denver, CO Posts: 148	Re: WTB - 8 lug wheel... need ASAP Wheels are all stamped Dot "T" 16x6.5 L not sure that that does to help us... __________________ _______________________________________________ 1968 Chevy C-20 w/ 396 1997 HD Sportster 1200 street tracker 1994 Chevy 1500 Silverado

09-29-2009, 06:29 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,861	Re: WTB - 8 lug wheel... need ASAP Oh OK,those are standard factory or factory-type wheels.They are much easier to find,yet have not been used for many years.It looked wider in the picture.They are heavy to ship,but you may get one offered as cheap as free. __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

09-29-2009, 09:47 AM	#17
Longhorn321 Size Matters Join Date: Aug 2007 Location: Lyman, SC Posts: 9,189	Re: WTB - 8 lug wheel... need ASAP I will try to remember to look tonight when I get home but I may have one. __________________ "Reading the owners manual is only for quitters." Jason Harper, Bloomberg News. ...WOOOO HOOOO!!!!

09-29-2009, 03:08 PM	#19
69lemans Registered User Join Date: Aug 2008 Location: simpsonville,sc Posts: 417	Re: WTB - 8 lug wheel... need ASAP This truck is in the new pullapart on Whitehorse Road in Greenville,SC. Maybe a Greenville member could check it out in the next day or so and see if there is a wheel in it somewhere. I'd do it for you but I'm going to be tied up the next few days and won't get a chance Attached Images

09-29-2009, 06:59 PM	#20
gcburdic Restoration Virgin! Join Date: Jan 2008 Location: Huntersville, NC Posts: 8,298	Re: WTB - 8 lug wheel... need ASAP OMG....Is that grill any good?!?!...I'd be interested in that!!! __________________ Geoff with a G 1968 Chevy C10 SWB The Mistress 1972 Custom Deluxe C20 Suburban A Suburban Named Isabella 1966 Ford Mustang Mama's High School Graduation Present

09-30-2009, 01:27 AM	#22
69lemans Registered User Join Date: Aug 2008 Location: simpsonville,sc Posts: 417	Re: WTB - 8 lug wheel... need ASAP "OMG....Is that grill any good?!?!...I'd be interested in that!!! " Best I can remember it has a small bung in the center on the bottom just above the bumper. Not bad though Last edited by 69lemans; 09-30-2009 at 01:30 AM.

09-30-2009, 05:42 PM	#24
Longhorn321 Size Matters Join Date: Aug 2007 Location: Lyman, SC Posts: 9,189	Re: WTB - 8 lug wheel... need ASAP Jordan, I have 5 wheels to go on the '76. I just looked and I have 3 that are 16 X 6, 1 that is 16 X 7 and 1 that is 16 X 8.5. Looks like I need some help too. What size is your spare? Maybe we can do some trading? Dwayne __________________ "Reading the owners manual is only for quitters." Jason Harper, Bloomberg News. ...WOOOO HOOOO!!!!



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.