IN FS: 63-72 LS swap motor mounts. - The 1947 - Present Chevrolet & GMC Truck Message Board Network

chevydog66 · 08-08-2010, 09:08 PM

LS swap motor mounts by Early Classic enterprises. Mocked up but never really used. All hardware included. ECE sells for $220, asking $165 shipped.

**dean jendro** · 08-09-2010, 02:04 PM

I have been looking at these mounts for some time now. Why didn't you use them? Did you find something that wouldn't quite work on the mounting?
Dean

chevydog66 · 08-09-2010, 10:30 PM

Quote:

Originally Posted by dean jendro

I have been looking at these mounts for some time now. Why didn't you use them? Did you find something that wouldn't quite work on the mounting?
Dean

The motor is a little too far forward than I would like. The a/c compressor fits in great. The LS clutch fan will also go on with the original 72 truck shroud if they are installed together. Its just that the motor is a little more forward than I would like.

**dean jendro** · 08-10-2010, 08:53 AM

I've got a '64' and I'm concerned with how much frame carving I might have to do. I've read where some guys have had to remove as much as 1/2 inch and others nothing at all. And of course, my frame is all powder coated.

chevydog66 · 08-10-2010, 09:40 AM

Quote:

Originally Posted by dean jendro

I've got a '64' and I'm concerned with how much frame carving I might have to do. I've read where some guys have had to remove as much as 1/2 inch and others nothing at all. And of course, my frame is all powder coated.

Probably none, it fit in my 72 with no problems. ECE makes a good product, many guys have recommended them, on www.ls1tech.com and www.performancetrucks.net

**Captainfab** · 08-10-2010, 11:15 PM

Yes you will have to trim the top flange of your frame to use these mounts. They will work with the '72 frame without trimming, because the '72's are narrower on the top flanges, since the '69-'72 trucks were available with big blocks. These are basically the '73-'87 mounts but with a different upper bracket to bolt up to the LSx engines.

Quote:

Originally Posted by dean jendro

I've got a '64' and I'm concerned with how much frame carving I might have to do. I've read where some guys have had to remove as much as 1/2 inch and others nothing at all. And of course, my frame is all powder coated.

**dean jendro** · 08-11-2010, 08:44 AM

Thanks CaptainFab. That's what I've been reading and I guess that's what I'll have to do. Chevydog66 I'll PM you on the purchase. Thanks.
Dean

chevydog66 · 08-17-2010, 07:35 PM

Sold.

**dean jendro** · 08-17-2010, 08:07 PM

I received the mounts today from UPS. Everything looks great, just as you advertised. I appreciate the good deal and prompt shipping. Now all I have to do is figure out how to trim the frame on the top rail without screwing up the powdercoat.
Dean

**Captainfab** · 08-17-2010, 09:43 PM

Post up some pics when you get them installed.

**dean jendro** · 08-17-2010, 10:03 PM

Captainfab,
I'll do that, but it'll be a while. It looks like we're both looking at chevydog66 post about which way do the mounts go. It also looks to me like he has left in right side and right in left side. I posted some pics.
Dean

08-08-2010, 09:08 PM	#1
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	FS: 63-72 LS swap motor mounts. LS swap motor mounts by Early Classic enterprises. Mocked up but never really used. All hardware included. ECE sells for $220, asking $165 shipped. Attached Images __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

08-09-2010, 02:04 PM	#2
dean jendro Old and crusty Join Date: Jan 2009 Location: Surprise, AZ Posts: 462	Re: FS: 63-72 LS swap motor mounts. I have been looking at these mounts for some time now. Why didn't you use them? Did you find something that wouldn't quite work on the mounting? Dean

08-10-2010, 08:53 AM	#4
dean jendro Old and crusty Join Date: Jan 2009 Location: Surprise, AZ Posts: 462	Re: FS: 63-72 LS swap motor mounts. I've got a '64' and I'm concerned with how much frame carving I might have to do. I've read where some guys have had to remove as much as 1/2 inch and others nothing at all. And of course, my frame is all powder coated.

08-11-2010, 08:44 AM	#7
dean jendro Old and crusty Join Date: Jan 2009 Location: Surprise, AZ Posts: 462	Re: FS: 63-72 LS swap motor mounts. Thanks CaptainFab. That's what I've been reading and I guess that's what I'll have to do. Chevydog66 I'll PM you on the purchase. Thanks. Dean

08-17-2010, 07:35 PM	#8
chevydog66 GM ONLY BABY!!! Join Date: Oct 2003 Location: Fort Wayne, IN. Posts: 1,998	Re: FS: 63-72 LS swap motor mounts. Sold. __________________ 2 wrongs don't make a right, but 3 lefts do. 66 Chevelle Malibu 406ci, 573hp, 10.99@121mph 96 Chevy Silverado Z71 72 GMC 1500 Super Custom LS 6.0/4L65 on airride http://www.cardomain.com/ride/707879...mc-c-k-pick-up

08-17-2010, 08:07 PM	#9
dean jendro Old and crusty Join Date: Jan 2009 Location: Surprise, AZ Posts: 462	Re: FS: 63-72 LS swap motor mounts. I received the mounts today from UPS. Everything looks great, just as you advertised. I appreciate the good deal and prompt shipping. Now all I have to do is figure out how to trim the frame on the top rail without screwing up the powdercoat. Dean

08-17-2010, 09:43 PM	#10
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,252	Re: FS: 63-72 LS swap motor mounts. Post up some pics when you get them installed. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

08-17-2010, 10:03 PM	#11
dean jendro Old and crusty Join Date: Jan 2009 Location: Surprise, AZ Posts: 462	Re: FS: 63-72 LS swap motor mounts. Captainfab, I'll do that, but it'll be a while. It looks like we're both looking at chevydog66 post about which way do the mounts go. It also looks to me like he has left in right side and right in left side. I posted some pics. Dean



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.