frenched in my side markers today - The 1947 - Present Chevrolet & GMC Truck Message Board Network

avysittinon22s · 08-29-2010, 02:16 PM

Decided to do the frenched in mod today to get a more slick look.

Sorry for bad pics

1LoC10 · 08-29-2010, 02:40 PM

looks cool

Andy4639 · 08-29-2010, 02:49 PM

What proccess did you use? I have thought of doing this also but my truck is already painted. Looks good though. Good job!

VA72C10 · 08-29-2010, 03:09 PM

another nice subtle mod for the truck!

c10seconds · 08-29-2010, 03:26 PM

Looks pretty slick! What are the details on the tail lights?

**GruntMoanCough** · 08-29-2010, 03:27 PM

Nice! Well done.

Bert W · 08-29-2010, 04:24 PM

Well Done! I was considering getting rid of mine, but this has me thinking otherwise.

ChevLoRay · 08-29-2010, 04:24 PM

Looks good for those who have to keep 'em. As for the taillights, that's cool, too. I've seen those on a website somewhere but forgot which one it was.

They're billet aluminum (if the same source I saw) and they fit within the "hole" and also take a special lens. Seems they were about $275 a pair.

avysittinon22s · 08-29-2010, 04:27 PM

thanks guys, as for my tail lights I cut the billet rings myself on a cnc mill, the lens is red plexiglass and a clear defusser lense.

big_al_71 · 08-29-2010, 07:35 PM

love the stance, mods, the whole truck!!!!

Hellbent · 08-29-2010, 09:06 PM

Suh-weeet. Man, what a sleek ride.

oldblue1968chevy · 08-29-2010, 09:45 PM

looks good, i did my rears now i need to get some front lenses..lol

colin_havens · 08-30-2010, 10:44 AM

I saw your truck at Showfest a couple of months ago. Looks great, with some suttle mods that you wouldnt notice unless you are into these trucks. It really made me wish I could have brought mine down. Are you coming to ///RA this weekend in Millington?

ChevLoRay · 08-30-2010, 11:25 AM

You know you could market those taillight "rings", right?

Nova70 · 08-30-2010, 02:54 PM

Quote:

Originally Posted by ChevLoRay

You know you could market those taillight "rings", right?

I'd buy a set.

Cbrown67 · 08-30-2010, 03:19 PM

i am in love with your truck

avysittinon22s · 08-30-2010, 03:37 PM

Quote:

Originally Posted by colin_havens

I saw your truck at Showfest a couple of months ago. Looks great, with some suttle mods that you wouldnt notice unless you are into these trucks. It really made me wish I could have brought mine down. Are you coming to ///RA this weekend in Millington?

Thanks, Ill be at Millington for sure, always a great show.

avysittinon22s · 08-30-2010, 03:38 PM

Quote:

Originally Posted by ChevLoRay

You know you could market those taillight "rings", right?

If I ever get my cnc software worked out , Ill get a membership and market them.

turner15 · 08-30-2010, 03:51 PM

I'll take a set too

c10seconds · 08-30-2010, 04:04 PM

Quote:

Originally Posted by avysittinon22s

If I ever get my cnc software worked out , Ill get a membership and market them.

Do it! Those are some nice pieces! I just bought some that look very similar from marquez designs. $250!!

I think they would be a great seller! Nice truck!

colin_havens · 08-30-2010, 05:12 PM

Quote:

Originally Posted by avysittinon22s

Thanks, Ill be at Millington for sure, always a great show.

I will be there in my 67 small window. Its bagged, lays frame, and is blue and silver 2 toned with a yellow stripe seperating the 2 colors. Give me a shout if you get a chance man!

mcbassin · 08-30-2010, 10:45 PM

Quote:

Originally Posted by avysittinon22s

If I ever get my cnc software worked out , Ill get a membership and market them.

I have CNC software at work, what do you need Fanuc? G-code, conversational? Do you have drawings or models? I would love to help if possible. Let me know

kcfirstbuild · 08-30-2010, 11:14 PM

OK so frenching the side markers is the greatest idea ever ! I have a 1968 c-10 can i french my original side markers or do i have to use the later model side markers?

Longhorn Man · 08-31-2010, 09:36 AM

its real easy, quick, and cheap to do.
http://67-72chevytrucks.com/vboard/s...d.php?t=363822

avysittinon22s · 09-01-2010, 09:55 PM

Quote:

Originally Posted by mcbassin

I have CNC software at work, what do you need Fanuc? G-code, conversational? Do you have drawings or models? I would love to help if possible. Let me know

Im using BobCad software on a Bridgeport machine. I have the post for my machine but doesnt use correct G codes or indicate clockwise or counter clockwise. Ive tried a few other posts and still doesnt do it correctly. I havnt messed with it in a while.

08-29-2010, 02:16 PM	#1
avysittinon22s Registered User Join Date: Jun 2006 Location: Paris, TN Posts: 376	frenched in my side markers today Decided to do the frenched in mod today to get a more slick look. Sorry for bad pics Attached Images

08-29-2010, 02:40 PM	#2
1LoC10 Insert Title Here Join Date: Feb 2006 Location: Dyer, Indiana Posts: 5,679	Re: frenched in my side markers today looks cool __________________ BOBBY _69 SWB_ 1000 pics of 67-72's>> http://s193.photobucket.com/albums/z...-72/?start=all <<

08-29-2010, 02:49 PM	#3
Andy4639 Old member Join Date: Jan 2002 Location: Liberty, & Garden City S.C. , U.S. Posts: 19,936	Re: frenched in my side markers today What proccess did you use? I have thought of doing this also but my truck is already painted. Looks good though. Good job! __________________ 1971 LWB Custom, 6.0LS & 4L80E, Speedhut.com GPS speedometer & gauges with A/C. 20" Boss 338's Grey wheels 4 wheel disc brakes. My Driver Seeing the USA in a 71 Upstate SC GM Truck Club 2013,14 and 2016 Hot Rod Pour Tour http://upstategmtrucks.com/ Get out and drive the truck this summer and have some fun! It sucks not being able to hear! LWB trucks rule, if you don't think so measure your SWB! After talking to tech support at Air Lift I have found out that the kit I need is 60811. Per the measurements I gave them. Ride height of truck inside spring and inside diameter of springs. Last edited by Andy4639; 08-29-2010 at 02:50 PM.

08-29-2010, 03:09 PM	#4
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: frenched in my side markers today another nice subtle mod for the truck! __________________ Looking for a 67-72 swb or blazer project in or around VA.

08-29-2010, 03:26 PM	#5
c10seconds Registered User Join Date: Oct 2009 Location: gilbert,AZ Posts: 947	Re: frenched in my side markers today Looks pretty slick! What are the details on the tail lights?

08-29-2010, 03:27 PM	#6
GruntMoanCough Registered User Join Date: May 2009 Location: Pemberton, BC Posts: 1,075	Re: frenched in my side markers today Nice! Well done. __________________ My goal in life is to be as good a person as my dog already thinks I am - Unknown

08-29-2010, 04:24 PM	#7
Bert W Registered User Join Date: Dec 2008 Location: Jackson, MS Posts: 373	Re: frenched in my side markers today Well Done! I was considering getting rid of mine, but this has me thinking otherwise.

08-29-2010, 04:24 PM	#8
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: frenched in my side markers today Looks good for those who have to keep 'em. As for the taillights, that's cool, too. I've seen those on a website somewhere but forgot which one it was. They're billet aluminum (if the same source I saw) and they fit within the "hole" and also take a special lens. Seems they were about $275 a pair. __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

08-29-2010, 04:27 PM	#9
avysittinon22s Registered User Join Date: Jun 2006 Location: Paris, TN Posts: 376	Re: frenched in my side markers today thanks guys, as for my tail lights I cut the billet rings myself on a cnc mill, the lens is red plexiglass and a clear defusser lense.

08-29-2010, 07:35 PM	#10
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: frenched in my side markers today love the stance, mods, the whole truck!!!! __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

08-29-2010, 09:06 PM	#11
Hellbent Don't blame the messenger Join Date: Nov 2009 Location: Summerville, SC Posts: 318	Re: frenched in my side markers today Suh-weeet. Man, what a sleek ride. __________________ On the Level Just a guy with a hammer and a grinder. OH!, and an HOA- enough said...: http://67-72chevytrucks.com/vboard/s...d.php?t=372525 "Some drink from the fountain of knowledge while others just gargle."

08-29-2010, 09:45 PM	#12
oldblue1968chevy Grandpa in the rustmobile... Join Date: Nov 2008 Location: Spokane WA/Viola TN Posts: 11,422	Re: frenched in my side markers today looks good, i did my rears now i need to get some front lenses..lol __________________ John Goose-1968 C10 355,9.32-1CR, Vortec Heads ,262 voodoo, 3.73:1 3OTT (HS ride/beater/farm truck) http://67-72chevytrucks.com/vboard/s...d.php?t=317684 Grams 53-1953 Chevrolet Belair http://67-72chevytrucks.com/vboard/s...=1#post4327784 1969 Chevy C10 Shortbed 4.5/6?" Frame off resto http://67-72chevytrucks.com/vboard/s...d.php?t=548136 1999 Toyota Tacoma 4x4

08-30-2010, 10:44 AM	#13
colin_havens Registered User Join Date: Dec 2007 Location: Mountain Home, AR Posts: 405	Re: frenched in my side markers today I saw your truck at Showfest a couple of months ago. Looks great, with some suttle mods that you wouldnt notice unless you are into these trucks. It really made me wish I could have brought mine down. Are you coming to ///RA this weekend in Millington?

08-30-2010, 11:25 AM	#14
ChevLoRay Old Skool Club Join Date: Jun 2001 Location: Benton, AR "The Heart of Arkansas" Posts: 10,880	Re: frenched in my side markers today You know you could market those taillight "rings", right? __________________ Member Nr. 2770 '96 GMC Sportside; 4.3/SLT - Daily driven....constantly needs washed. '69 C-10 SWB; 350/TH400 - in limbo The older I get, the better I was.

08-30-2010, 03:19 PM	#16
Cbrown67 Registered User Join Date: Jul 2010 Location: MASS Posts: 178	Re: frenched in my side markers today i am in love with your truck



Register or Log In To remove these advertisements.

08-30-2010, 03:51 PM	#19
turner15 Registered User Join Date: Jan 2007 Location: Toronto Canada Posts: 265	Re: frenched in my side markers today I'll take a set too

08-30-2010, 11:14 PM	#23
kcfirstbuild Registered User Join Date: Aug 2009 Location: Red Wing Mn Posts: 526	Re: frenched in my side markers today OK so frenching the side markers is the greatest idea ever ! I have a 1968 c-10 can i french my original side markers or do i have to use the later model side markers?

08-31-2010, 09:36 AM	#24
Longhorn Man its all about the +6 inches Join Date: Jan 2001 Location: Hilliard Ohio Posts: 2,693	Re: frenched in my side markers today its real easy, quick, and cheap to do. http://67-72chevytrucks.com/vboard/s...d.php?t=363822

Register or Log In To remove these advertisements.