UT Complete 1968 396 and 383 stroker shortblock - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Heavy Evy · 06-14-2011, 10:33 PM

Bear with me as this is my first time selling something on this forum. No pm's about the motors. Only ask quetions in this thread please. Shipping would cost a fortune on these and I'm not really not sure who I would use to do it. I have two motor's for sale. One complete big block 396 from intake to pan even has the orginal delco coil also has motor mounts alternator and powersteering brackets. This is a virgin block and is all together it spins freely but I would strongly recomend a rebuild. I'll take $500 firm for it 396 sold locally!. 383 shortblock I've had a for a few years and messed around with is now collecting dust in my garage. The block is a seasoned early 70's 350 four bolt main bored .40 over so technically 385 cubic inches one of the head bolts has been helicoiled. The crank is a steel eagle with gm rods and sealed power pistons, this set up is also balanced. Pete jackson noisy gear drive and a good size 292 duration cam also has oil pan and flexplate for auto trans. I have maybe put 3000 miles on this engine since I built it. Although this motor ran I would take it to a machine shop to get checked out before you do anything with it. The 383 with a smaller cam got my 5000 pound C20 to run 16.2's in the 1/4 mile with 3.54 gears. I'm asking $500 for it. I wanted to build the 396 for my 71 but work is slow and I could really use the cash. Let me know what's up guy's.

Thanks, Evan

Heavy Evy · 06-14-2011, 10:34 PM

383 pics

Heavy Evy · 06-14-2011, 11:55 PM

I also maybe interested in trades for 15inch 5 lug salt flat specials or tt2's rims.

astevens · 06-15-2011, 07:24 AM

I wish you were closer. Good prices.

m6z · 06-15-2011, 08:28 AM

Quote:

Originally Posted by astevens

I wish you were closer. Good prices.

Same here. Good prices.

Heavy Evy · 06-15-2011, 12:24 PM

everyone here in utah don't seem to like the prices. guess im asking too much haha.
Posted via Mobile Device
Posted via Mobile Device

dave666693 · 06-15-2011, 12:36 PM

do you have more details on the short block? Block number, pistons, cam number, etc...? Thanks

Heavy Evy · 06-15-2011, 09:28 PM

Quote:

Originally Posted by dave666693

do you have more details on the short block? Block number, pistons, cam number, etc...? Thanks

The block number is pictured but the partial vin and other numbers on the front are machined off it is 4 bolt main. 10 to 1 flattop piston. Cam is 292 duration and .488 lift. Pete Jackson noisy geardrive. high volume oil pump etc.

dave666693 · 06-16-2011, 12:35 AM

why do you think a shop should look at it? Do you suspect something is wrong?

Heavy Evy · 06-16-2011, 01:04 AM

no it ran fine. I just don't want you to put it together and have a surprise be cause I've had that happen to me.

dave666693 · 06-16-2011, 01:11 AM

I have been looking for a reason to take a road trip. Probably wouldn't be able to get there until early July. Would you hold it that long with a down payment?

Heavy Evy · 06-16-2011, 01:15 AM

Not a problem if you are serious then its yours. I would rather sell to a fellow 67/72 lover. How far are you from Seattle? I visit there often.

dave666693 · 06-16-2011, 01:25 AM

just north of Tacoma. Do you want to deliver?

dave666693 · 06-16-2011, 01:28 AM

How many hours is it to Reno from there?

Heavy Evy · 06-16-2011, 01:30 AM

I wont be up there till september for a concert and I'm not sure if im driving or flying yet. I love the country up there I just need to relocate.

Heavy Evy · 06-16-2011, 01:30 AM

Reno Is about 10-12 hours if I remember right

dave666693 · 06-16-2011, 01:36 AM

Let me look at the map and I will give you a definate answer tomorrow. Would we be able to load it in my SUV?

Heavy Evy · 06-16-2011, 01:39 AM

I can load it in anything man no worries

dave666693 · 06-16-2011, 10:50 PM

After a day to think about it and looking at the expense to get it, I am going to pass. Thanks

Heavy Evy · 06-16-2011, 11:16 PM

okie doke. if i drive to seattle in september and still have it i'll let you know.
Posted via Mobile Device

Heavy Evy · 06-18-2011, 12:31 AM

ttt

Heavy Evy · 06-20-2011, 01:09 PM

any takers???

Heavy Evy · 06-24-2011, 01:29 PM

Trades? Offers? World peace? I need some 3.07 rear gears for my burban

Heavy Evy · 07-02-2011, 10:02 PM

396 sold locally!! You will be happy to know it was picked up by a 70 C10 and it will be going into a 72 Cheyenne. Keeping it in the family hooray!

dave666693 · 07-13-2011, 05:16 PM

Quote:

Originally Posted by Heavy Evy

Trades? Offers? World peace? I need some 3.07 rear gears for my burban

I am taking the 3.07 rear end out of my Blazer if you want to come and get it for trade

06-14-2011, 10:33 PM	#1
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Complete 1968 396 and 383 stroker shortblock Bear with me as this is my first time selling something on this forum. No pm's about the motors. Only ask quetions in this thread please. Shipping would cost a fortune on these and I'm not really not sure who I would use to do it. I have two motor's for sale. One complete big block 396 from intake to pan even has the orginal delco coil also has motor mounts alternator and powersteering brackets. This is a virgin block and is all together it spins freely but I would strongly recomend a rebuild. I'll take $500 firm for it 396 sold locally!. 383 shortblock I've had a for a few years and messed around with is now collecting dust in my garage. The block is a seasoned early 70's 350 four bolt main bored .40 over so technically 385 cubic inches one of the head bolts has been helicoiled. The crank is a steel eagle with gm rods and sealed power pistons, this set up is also balanced. Pete jackson noisy gear drive and a good size 292 duration cam also has oil pan and flexplate for auto trans. I have maybe put 3000 miles on this engine since I built it. Although this motor ran I would take it to a machine shop to get checked out before you do anything with it. The 383 with a smaller cam got my 5000 pound C20 to run 16.2's in the 1/4 mile with 3.54 gears. I'm asking $500 for it. I wanted to build the 396 for my 71 but work is slow and I could really use the cash. Let me know what's up guy's. Thanks, Evan Attached Images __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck. Last edited by Heavy Evy; 07-02-2011 at 10:03 PM.

06-14-2011, 10:34 PM	#2
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock 383 pics Attached Images __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

06-14-2011, 11:55 PM	#3
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock I also maybe interested in trades for 15inch 5 lug salt flat specials or tt2's rims. __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

06-15-2011, 07:24 AM	#4
astevens Registered User Join Date: May 2008 Location: Clarksburg, WV Posts: 335	Re: Complete 1968 396 and 383 stroker shortblock I wish you were closer. Good prices.

06-15-2011, 12:24 PM	#6
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock everyone here in utah don't seem to like the prices. guess im asking too much haha. Posted via Mobile Device Posted via Mobile Device __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

06-15-2011, 12:36 PM	#7
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Complete 1968 396 and 383 stroker shortblock do you have more details on the short block? Block number, pistons, cam number, etc...? Thanks __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

06-16-2011, 12:35 AM	#9
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Complete 1968 396 and 383 stroker shortblock why do you think a shop should look at it? Do you suspect something is wrong? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

06-16-2011, 01:04 AM	#10
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock no it ran fine. I just don't want you to put it together and have a surprise be cause I've had that happen to me. __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

06-16-2011, 01:11 AM	#11
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Complete 1968 396 and 383 stroker shortblock I have been looking for a reason to take a road trip. Probably wouldn't be able to get there until early July. Would you hold it that long with a down payment? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

06-16-2011, 01:15 AM	#12
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock Not a problem if you are serious then its yours. I would rather sell to a fellow 67/72 lover. How far are you from Seattle? I visit there often. __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

06-16-2011, 01:25 AM	#13
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Complete 1968 396 and 383 stroker shortblock just north of Tacoma. Do you want to deliver? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

06-16-2011, 01:28 AM	#14
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Complete 1968 396 and 383 stroker shortblock How many hours is it to Reno from there? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

06-16-2011, 01:30 AM	#15
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock I wont be up there till september for a concert and I'm not sure if im driving or flying yet. I love the country up there I just need to relocate. __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

06-16-2011, 01:36 AM	#17
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Complete 1968 396 and 383 stroker shortblock Let me look at the map and I will give you a definate answer tomorrow. Would we be able to load it in my SUV? __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

06-16-2011, 01:39 AM	#18
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock I can load it in anything man no worries __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.



Register or Log In To remove these advertisements.

06-16-2011, 10:50 PM	#19
dave666693 Registered User Join Date: Jul 2005 Location: Edgewood, WA Posts: 899	Re: Complete 1968 396 and 383 stroker shortblock After a day to think about it and looking at the expense to get it, I am going to pass. Thanks __________________ 67 C20/ 68 C10 stepside/inline 250--current project 71 GMC 4x4 70 Blazer project-Zombie assault vehicle 67 4x4 Burb

06-16-2011, 11:16 PM	#20
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock okie doke. if i drive to seattle in september and still have it i'll let you know. Posted via Mobile Device __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

06-18-2011, 12:31 AM	#21
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock ttt __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

06-20-2011, 01:09 PM	#22
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock any takers??? __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

06-24-2011, 01:29 PM	#23
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock Trades? Offers? World peace? I need some 3.07 rear gears for my burban __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

07-02-2011, 10:02 PM	#24
Heavy Evy born to lose Join Date: Sep 2008 Location: Salt Lake City, Utah Posts: 842	Re: Complete 1968 396 and 383 stroker shortblock 396 sold locally!! You will be happy to know it was picked up by a 70 C10 and it will be going into a 72 Cheyenne. Keeping it in the family hooray! __________________ _____________________ '67 Chevy Belair Wagon 283 Powerglide '68 Chevy II Nova 2 door 350 TH400 Sold!! '71 Chevy C20 350 TH350 '71 Chevy C10 Burb 350 TH350 stolen totalled gone.... Burb Build http://67-72chevytrucks.com/vboard/s...d.php?t=475155 Nova Build http://67-72chevytrucks.com/vboard/s...d.php?t=498979 Wagon Build http://67-72chevytrucks.com/vboard/s...d.php?t=543052 Not giving a truck.

Register or Log In To remove these advertisements.