Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
04-12-2012, 11:35 AM | #1 |
Registered User
Join Date: Apr 2010
Location: Easton Ma
Posts: 53
|
Dash indicators? Burnt/melted?
Hey guys, not sure what these are so I will include pics. Truck is a 66 gmc.
Left side, toggle switch on bottom, I think is for the blinkers? What did the stock one look like? Right side, here you can better see the red colored things that appear to have been melted? What are these? Are replacements available? Posted via Mobile Device
__________________
1966 GMC stepdside shortbed- needs some love |
04-12-2012, 11:42 AM | #2 |
Registered User
Join Date: Nov 2011
Location: fayetteville nc
Posts: 10,338
|
Re: Dash indicators? Burnt/melted?
Turn signals are normally mounted on the steering column. You should see a slot for the lever just behind the wheel on the left side. ive never seen a toggle switch used for turn signals, as they normally are in the on or off position and turn signals would require two ons and an off. The red lenses you should be able to get used off someone here, I dont know of anybody repop'n them.
__________________
1963 Short bed step side SBW 427 big block and borg warner T-16 HD 3 speed manual http://67-72chevytrucks.com/vboard/s...d.php?t=519869 1963 Short bed fleetside BBW 348 1st gen big block w/Powerglide http://67-72chevytrucks.com/vboard/s...d.php?t=619024 1964 Short bed trailer |
04-12-2012, 11:44 AM | #3 |
Registered User
Join Date: Nov 2010
Location: roswell georgia
Posts: 164
|
Re: Dash indicators? Burnt/melted?
Hello Loud-
My 66 Suburban has a regular turn signal stalk to the left of the steering wheel... My dash bulb covers are also 'burned out'... I forget what someone else said, but top left is left turn signal, top right is right turn signal. One of the lower ones is the generator light. Not sure of the other- I'll check old posts. Good Luck! |
04-12-2012, 12:04 PM | #4 |
Registered User
Join Date: Apr 2012
Location: Cambridge, Ontario, Canada
Posts: 1,771
|
Re: Dash indicators? Burnt/melted?
the "lights, wiper, choke" labels are... quaint I will say! Sorry, I am new to the sport, and am learning the ropes on my 66 chev, good luck with the GMC, love to watch your progress
|
04-12-2012, 12:45 PM | #5 |
Registered User
Join Date: Nov 2010
Location: roswell georgia
Posts: 164
|
Re: Dash indicators? Burnt/melted?
Loud-
This was a reply to my question a while back: Dash lights on single dash models are as follows: Generator upper left (Lights up when ignition is turned on, goes out when engine runs and generator charges.), Hi Beam lower left (Goes on when headlight high beam is selected with foot dimmer switch.) Low Oil upper right (Lights up when ignition is turned on, goes out when engine starts. Buzzer sounds on some models. If tell-tale lights up when truck is operating, investigate!) Turn Signal lower right (Flashes on and off to show that directional signals are working.) |
04-12-2012, 01:41 PM | #6 | |
Registered User
Join Date: May 2010
Location: Visalia, CA
Posts: 376
|
Re: Dash indicators? Burnt/melted?
Quote:
Thanks two of mine are burnt out also. nice to know. |
|
04-12-2012, 01:50 PM | #7 |
Registered User
Join Date: Oct 2010
Location: Gresham, Oregon
Posts: 93
|
Re: Dash indicators? Burnt/melted?
Look What I Have, Intrested
__________________
GreshamP1GLET |
04-12-2012, 01:59 PM | #8 |
Registered User
Join Date: Apr 2010
Location: Easton Ma
Posts: 53
|
Re: Dash indicators? Burnt/melted?
How much for the indicators?
Thanks for all the replies guys, very helpful! I can't wait to get this thing running! Posted via Mobile Device
__________________
1966 GMC stepdside shortbed- needs some love |
04-12-2012, 02:11 PM | #9 |
Registered User
Join Date: Oct 2010
Location: Gresham, Oregon
Posts: 93
|
Re: Dash indicators? Burnt/melted?
Make me an offer for the whole thing
__________________
GreshamP1GLET |
04-12-2012, 02:13 PM | #10 |
Registered User
Join Date: Oct 2010
Location: Gresham, Oregon
Posts: 93
|
Re: Dash indicators? Burnt/melted?
Better picture
__________________
GreshamP1GLET |
04-12-2012, 02:15 PM | #11 |
Registered User
Join Date: Oct 2010
Location: Gresham, Oregon
Posts: 93
|
Re: Dash indicators? Burnt/melted?
Another picture
__________________
GreshamP1GLET |
04-12-2012, 02:44 PM | #12 |
Registered User
Join Date: Feb 2011
Location: Orient, Oregon
Posts: 722
|
Re: Dash indicators? Burnt/melted?
mtruckr is correct....
Chev and GMC differ in the idiot light/turn indicator department. The lower right green lamp indicates turn sig...blinks the same way wether you're using left or right. I guess the GMC engineering department figured we were sharp enough to tell which way we were turning..
__________________
Les Hunter '59 3803 someday to be 3853 '63 GMC K1000...351E, TH400 Daily '66 GMC 4000...351C, 5&2 |
04-12-2012, 02:52 PM | #13 | |
Registered User
Join Date: Feb 2011
Location: Orient, Oregon
Posts: 722
|
Re: Dash indicators? Burnt/melted?
Quote:
The problems that can cause melting of those lenses are .... #1 Wrong Bulbs...(too many amps) #2 Voltage Regulator Failure (usually, more than about 13 volts is too much. Often that will also start burning out the smaller dash bulbs.
__________________
Les Hunter '59 3803 someday to be 3853 '63 GMC K1000...351E, TH400 Daily '66 GMC 4000...351C, 5&2 |
|
Bookmarks |
|
|