ATCA Macungie 2016!! - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**special-K** · 06-23-2016, 07:14 AM

This year's show was bigger than ever, over 800 trucks. Good dry weather after rain, down here, Friday morning. We rolled up in Chuck's '58 Reo and arrived around 6pm. Took a walk through the swap meet, went out to Main St. for a pizza and a beer, then started looking at trucks at night and engaging in chitter chatter. Pretty much the same thing the next day, except started off at 6am over at the Bear Swamp Diner for breakfast and coffee.

I took a few pictures to share:

**special-K** · 06-23-2016, 07:30 AM

First one is a Model TT, the truck model. It has a 5th wheel platter. Check out the spring mount bumper, radiator shutters, and headlight visors (light dimmers) Second is a conversion called a Super T. Longer heavier frame, original axle solid mounted in original position, chain drive, extra big radiator, extra bracing on axle ans under transmission. Not sure what else, but purdy dang cool!

**special-K** · 06-23-2016, 07:37 AM

Mighty fine lettering job. Even Chuck was impressed. How about that GMC/Airstream combo?

**special-K** · 06-23-2016, 07:43 AM

Our hotel (Chuck's truck). And a Reo wrecker. This is the place to see rare trucks:

**special-K** · 06-23-2016, 07:54 AM

Check back for more. I'll let you know when I'm done

C10 - C90 Bill · 06-23-2016, 08:38 AM

As usual, great pictures Tim.

63 & 64 Bowties · 06-23-2016, 03:54 PM

Great lookin' trucks there. Thanks for sharing, Tim.

**special-K** · 06-23-2016, 11:27 PM

Thanks. It was a sea of trucks of all types

**special-K** · 06-24-2016, 05:36 AM

El Turbo, the famous west coast rig that has been around longer than I can recall. My favorite Peterbuilt rig. I've seen this guy's rig at all the shows for years. Not a spot spared yet not one doodad more than needed. Just a well thought out from front to back top to bottom no BS attention to detail piece. Very cool Chevy hauler and li'l Mack dump

**special-K** · 06-24-2016, 05:48 AM

On the lighter side, the finest father/son 67-72 combo I know. Rob71's C/10 Panel and his son's unrestored mostly original paint big block C/20. His son is in HS. Two pcs. of lower trim are missing on driver side. I offered to give some good used pieces and Rob said they had them, that his boy is saving up to paint lower area. I like hearing that. The boy has a great truck and doing it with his own money, nothing handed to him except a great father's influence (and a lent hand I'd guess)

**special-K** · 06-24-2016, 05:57 AM

Cool C10 with cool wheels that I am amazed aren't reproduced. I' guess they'd cost too much less than ugly junk they make, so no one would buy the junk. I learned to stay away from chrome wheels and went with aluminum slots. But that was daily year round driver days. Now with trucks sitting in garages, more miles on the washing//polishing hand than the truck, and fair weather driving I'd think chrome would hold up just fine

**special-K** · 06-24-2016, 06:04 AM

I've never been to a big truck museum with over 800 trucks on display. Or, I guess I have, just not the brick and mortar type.

Touching this truck would be a Federal offense:

**special-K** · 06-24-2016, 06:11 AM

This is going to take a lot of time to post all these pictures. I hope I get more out of it than a couple of Bills

**special-K** · 06-24-2016, 08:33 AM

These are all "snap shots". I took my time to look them all over all weekend. But when I got the camera out it was walk from truck to truck stopping in the right spot, aim, and shoot. Sometimes I'd have to wait for people to clear, but it was on down the line, snap, snap, snap. It would be nice to catch each one when the light was on the best side to show, but you have to break the rules of photography if you want to grab the shots on one go 'round. I guess I got about 1/8 of the trucks...100+. I try to get the variety and , of course, the ones that catch my particular fancy

**special-K** · 06-24-2016, 11:38 AM

I'll be away a couple/few days. Here are 5 more till I get back. Bill, I hope you don't mind looking at this one:

C10 - C90 Bill · 06-24-2016, 12:28 PM

Quote:

Originally Posted by special-K

Bill, I hope you don't mind looking at this one:

I was hoping there was some 9500's there, lol.

Real nice one to boot.

jumpsoffrock · 06-24-2016, 08:43 PM

Awesome coverage! Thank you very much Tim, there's even a late 1930's White!

flashed · 06-24-2016, 09:04 PM

Tim ,you have a good eye ,I like every truck you shot ,thanks for the pics .

junkmandan3 · 06-25-2016, 12:07 AM

Tim------Thanks for posting not too many Macks , as there would be an abundance .

In group # 12, the orange and white Pete looks like Tom Mullin's, 1st. VP of ATHS who was at Ashland............without his truck .

**GR8-68** · 06-26-2016, 07:48 AM

Some beautiful pics of some heavy haulers

**special-K** · 06-28-2016, 09:37 AM

Glad you all like 'em. I'm not done yet. keep checking back.

Dan, that truck I swear was owned by another feller my last time up, year before last, and he was from NJ. I couldn't be wrong because he had a wife that I liked looking at a hella lot more than that beautiful Peterbuilt. I Believe it was for sale then. This time it had lettering from a truck parts shop in PA and a younger guy with a shop t-shirt. Maybe it's the same truck as you think, passed along a couple times. See if Tom sold it. That thing is gorgeous!

I hear ya on the Macks. Not so many as usual this time. You'll see the LTLs, which I like a lot. But I do try to have a variety and didn't get but maybe 1/4 or less of the 800+

Here's your variety:

**special-K** · 06-28-2016, 09:47 AM

Another pretty needlenose

**special-K** · 06-28-2016, 09:53 AM

Hood sides (& a cowl)

**special-K** · 06-28-2016, 11:57 PM

5 more

**special-K** · 06-29-2016, 08:06 AM

Good morning

06-23-2016, 07:14 AM	#1
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	ATCA Macungie 2016!! This year's show was bigger than ever, over 800 trucks. Good dry weather after rain, down here, Friday morning. We rolled up in Chuck's '58 Reo and arrived around 6pm. Took a walk through the swap meet, went out to Main St. for a pizza and a beer, then started looking at trucks at night and engaging in chitter chatter. Pretty much the same thing the next day, except started off at 6am over at the Bear Swamp Diner for breakfast and coffee. I took a few pictures to share: Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-23-2016, 07:30 AM	#2
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! First one is a Model TT, the truck model. It has a 5th wheel platter. Check out the spring mount bumper, radiator shutters, and headlight visors (light dimmers) Second is a conversion called a Super T. Longer heavier frame, original axle solid mounted in original position, chain drive, extra big radiator, extra bracing on axle ans under transmission. Not sure what else, but purdy dang cool! Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-23-2016, 07:37 AM	#3
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! Mighty fine lettering job. Even Chuck was impressed. How about that GMC/Airstream combo? Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-23-2016, 07:43 AM	#4
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! Our hotel (Chuck's truck). And a Reo wrecker. This is the place to see rare trucks: Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-23-2016, 07:54 AM	#5
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! Check back for more. I'll let you know when I'm done Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-23-2016, 08:38 AM	#6
C10 - C90 Bill Registered User Join Date: Nov 2001 Location: Moneta, VA USA Posts: 3,070	Re: ATCA Macungie 2016!! As usual, great pictures Tim. __________________ '60-'72 Chev/GMC Fan GMC 9500 Fan Detroit Diesel Fan

06-23-2016, 03:54 PM	#7
63 & 64 Bowties and a few others Join Date: Jun 2007 Location: Blue Ridge Mountains of VA Posts: 5,638	Re: ATCA Macungie 2016!! Great lookin' trucks there. Thanks for sharing, Tim. __________________ Bill US Army Vet -193rd Infantry BlueRidgeMuscleCars.com “The greatness of a nation and its moral progress can be judged by the way its animals are treated” Gandhi

06-23-2016, 11:27 PM	#8
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! Thanks. It was a sea of trucks of all types Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-24-2016, 05:36 AM	#9
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! El Turbo, the famous west coast rig that has been around longer than I can recall. My favorite Peterbuilt rig. I've seen this guy's rig at all the shows for years. Not a spot spared yet not one doodad more than needed. Just a well thought out from front to back top to bottom no BS attention to detail piece. Very cool Chevy hauler and li'l Mack dump Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-24-2016, 05:48 AM	#10
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! On the lighter side, the finest father/son 67-72 combo I know. Rob71's C/10 Panel and his son's unrestored mostly original paint big block C/20. His son is in HS. Two pcs. of lower trim are missing on driver side. I offered to give some good used pieces and Rob said they had them, that his boy is saving up to paint lower area. I like hearing that. The boy has a great truck and doing it with his own money, nothing handed to him except a great father's influence (and a lent hand I'd guess) Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-24-2016, 05:57 AM	#11
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! Cool C10 with cool wheels that I am amazed aren't reproduced. I' guess they'd cost too much less than ugly junk they make, so no one would buy the junk. I learned to stay away from chrome wheels and went with aluminum slots. But that was daily year round driver days. Now with trucks sitting in garages, more miles on the washing//polishing hand than the truck, and fair weather driving I'd think chrome would hold up just fine Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-24-2016, 06:04 AM	#12
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! I've never been to a big truck museum with over 800 trucks on display. Or, I guess I have, just not the brick and mortar type. Touching this truck would be a Federal offense: Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-24-2016, 06:11 AM	#13
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! This is going to take a lot of time to post all these pictures. I hope I get more out of it than a couple of Bills Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-24-2016, 08:33 AM	#14
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! These are all "snap shots". I took my time to look them all over all weekend. But when I got the camera out it was walk from truck to truck stopping in the right spot, aim, and shoot. Sometimes I'd have to wait for people to clear, but it was on down the line, snap, snap, snap. It would be nice to catch each one when the light was on the best side to show, but you have to break the rules of photography if you want to grab the shots on one go 'round. I guess I got about 1/8 of the trucks...100+. I try to get the variety and , of course, the ones that catch my particular fancy Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-24-2016, 11:38 AM	#15
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! I'll be away a couple/few days. Here are 5 more till I get back. Bill, I hope you don't mind looking at this one: Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~



Register or Log In To remove these advertisements.

06-24-2016, 08:43 PM	#17
jumpsoffrock Registered User Join Date: Apr 2014 Location: California Posts: 928	Re: ATCA Macungie 2016!! Awesome coverage! Thank you very much Tim, there's even a late 1930's White!

06-24-2016, 09:04 PM	#18
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: ATCA Macungie 2016!! Tim ,you have a good eye ,I like every truck you shot ,thanks for the pics .

06-25-2016, 12:07 AM	#19
junkmandan3 Registered User Join Date: Dec 2013 Location: Northfield,Ohio Posts: 221	Re: ATCA Macungie 2016!! Tim------Thanks for posting not too many Macks , as there would be an abundance . In group # 12, the orange and white Pete looks like Tom Mullin's, 1st. VP of ATHS who was at Ashland............without his truck .

06-26-2016, 07:48 AM	#20
GR8-68 Senior Member Join Date: Jun 2009 Location: Belews Creek , NC Posts: 4,220	Re: ATCA Macungie 2016!! Some beautiful pics of some heavy haulers __________________ Larry It is easily overlooked that what is now called vintage was once brand new. "Project 68" paypal.me/ldgrant

06-28-2016, 09:37 AM	#21
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! Glad you all like 'em. I'm not done yet. keep checking back. Dan, that truck I swear was owned by another feller my last time up, year before last, and he was from NJ. I couldn't be wrong because he had a wife that I liked looking at a hella lot more than that beautiful Peterbuilt. I Believe it was for sale then. This time it had lettering from a truck parts shop in PA and a younger guy with a shop t-shirt. Maybe it's the same truck as you think, passed along a couple times. See if Tom sold it. That thing is gorgeous! I hear ya on the Macks. Not so many as usual this time. You'll see the LTLs, which I like a lot. But I do try to have a variety and didn't get but maybe 1/4 or less of the 800+ Here's your variety: Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-28-2016, 09:47 AM	#22
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! Another pretty needlenose Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-28-2016, 09:53 AM	#23
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! Hood sides (& a cowl) Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-28-2016, 11:57 PM	#24
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! 5 more Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

06-29-2016, 08:06 AM	#25
special-K Special Order Join Date: Nov 2004 Location: Mt Airy, MD Posts: 85,862	Re: ATCA Macungie 2016!! Good morning Attached Images __________________ "BUILDING A BETTER WAY TO SERVE THE USA"......67/72......"The New Breed" GMC '67 C1500 Wideside Super Custom SWB: 327/M22/3.42 posi.........."The '67" (project) GMC '72 K2500 Wideside Sierra Custom Camper: 350/TH350/4.10 Power-Lok..."The '72" (rolling) Tim "Don't call me a redneck. I'm a rough cut country gentleman" R.I.P. ~ East Side Low Life ~ El Jay ~ 72BLUZ ~ Fasteddie69 ~ Ron586 ~ 67ChevyRedneck ~ Grumpy Old Man ~

Register or Log In To remove these advertisements.