|
09-30-2018, 07:20 PM
|
#1 |
|
Registered User
Join Date: Sep 2018
Location: Sacramento,CA
Posts: 85
|
Gas tank clean
Just pulled my gas tank and of course it's got bad gas and it's a little red so yea.... I was just going to flush it with water... does any one recommend any thing?? Any help is good help thanks!!
__________________
70 custom10 swb fleet side 454 th400 |
|
|
|
09-30-2018, 07:51 PM
|
#2 |
|
Senior Member
 
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,975
|
Re: Gas tank clean
Recommend take it to a local radiator shop and have them clean it. Hard to get water out of it completely and can cause problems down the road. Homemade option is to buy a fuel tank cleaner and sealant kit and do it that way (I am pretty sure Eastwood sells a kit, but several places sell it). It converts the rust then puts a good seal on the inside - I think the kit I had was a two step process, but it's been awhile. I've done it with a few tractor fuel tanks and it works pretty well - but make sure to follow the directions to a T or you can end up with too much sealer inside and it will take forever to dry.
|
|
|
|
|
09-30-2018, 07:52 PM
|
#3 |
|
laying low
Join Date: Mar 2001
Location: Searcy, Ark. USA
Posts: 13,513
|
Re: Gas tank clean
__________________
Boog 69 Chevy stepside, 358/T350, 4.11 posi, 4.5/4 drop, rallys, poboy driver primer is finer 91 Chevy sportside, Tahoe, Yukon & GMC Crewcab All GM..'nuff said. I stand for the flag and kneel at the cross |
|
|
|
|
09-30-2018, 08:58 PM
|
#4 |
|
Senior Member
Join Date: Oct 2009
Location: Godley, TX
Posts: 17,975
|
Re: Gas tank clean
Thanks for sharing that Boog - I forgot about the alcohol step, that was part of the process even with Eastwood stuff I used. And that step would also make it ok to use water as well.
|
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
