Window channel - The 1947 - Present Chevrolet & GMC Truck Message Board Network

phlegm · 08-30-2020, 10:20 AM

I changed the vertical window channel a while back to stop rattling, but the window frame is digging into it and shredded it. This also hangs the window up, puts stress on the regulator and won't let the window go all the way up.

What am I missing? I left the channel in the truck and used a small metal scraper through the metal channel. Then put some of the black goo on it and pushed it in. What am I doing wrong? Did I just buy something that we're too thick? Any tips would be appreciated

08-30-2020, 10:20 AM	#1
phlegm Still Green but learning Join Date: Nov 2004 Location: Central NC Posts: 1,895	Window channel I changed the vertical window channel a while back to stop rattling, but the window frame is digging into it and shredded it. This also hangs the window up, puts stress on the regulator and won't let the window go all the way up. What am I missing? I left the channel in the truck and used a small metal scraper through the metal channel. Then put some of the black goo on it and pushed it in. What am I doing wrong? Did I just buy something that we're too thick? Any tips would be appreciated __________________ -- Cory 71 Cheyenne 10 - SWB, 350, "3 on the tree" AC cab 07 Suburban LTZ 4x4 2010 Acura TL 98 Mastercraft "FrankenStar" 225 27253 UPS/USPS IIOY....nope never was



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.