Where to buy bench seat hog rings and pliers?

[LockDoc]

-
My local tractor supply carries them. I don't know if you have any kind of a farm store near you or not. If you do give them a call.

LockDoc

[Mister-B]

Originally Posted by LockDoc

-
My local tractor supply carries them. I don't know if you have any kind of a farm store near you or not. If you do give them a call.

LockDoc

Yeah, we have IFA, Cal Ranch, etc. Wont that just be chain link fencing stuff, vs interior rings?

That's a great idea though. Hadn't thought of that. Is there just a standard type ring I can ask them if they have?
Posted via Mobile Device

[LockDoc]

Originally Posted by Mister-B

Yeah, we have IFA, Cal Ranch, etc. Wont that just be chain link fencing stuff, vs interior rings?

That's a great idea though. Hadn't thought of that. Is there just a standard type ring I can ask them if they have?
Posted via Mobile Device

All I know them by is hog rings. What is different about the fencing rings?

LockDoc

[Mister-B]

Originally Posted by LockDoc

All I know them by is hog rings. What is different about the fencing rings?

LockDoc

I've never used hog rings of any kind, so I'm trying to figure this out. I assumed when Home Depot said they are for fencing, that they must be different than interior rings, but maybe not.

This is a pic of the ones from Home Depot. Will that work?

Posted via Mobile Device

[LockDoc]

Originally Posted by Mister-B

I've never used hog rings of any kind, so I'm trying to figure this out. I assumed when Home Depot said they are for fencing, that they must be different than interior rings, but maybe not.

This is a pic of the ones from Home Depot. Will that work?

Yep.

[SS Tim]

Fence rings are larger and heavier wire. Automotive rings tend to be sharper as well. Try finding a on-line auto trim supplier. Good pliers are a must, cheap pliers are an absolute pita. If you want, email any item specific links for on-line or ebay and I'll take a look at them.

[Mister-B]

Originally Posted by SS Tim

Fence rings are larger and heavier wire. Automotive rings tend to be sharper as well. Try finding a on-line auto trim supplier. Good pliers are a must, cheap pliers are an absolute pita. If you want, email any item specific links for on-line or ebay and I'll take a look at them.

Harbor freight has these pliers
http://www.harborfreight.com/straigh...iers-3102.html

Would these rings work?
http://www.homedepot.com/p/Prime-Lin...6#.UUqim-69KSN
Posted via Mobile Device

[SS Tim]

Originally Posted by Mister-B

Harbor freight has these pliers
http://www.harborfreight.com/straigh...iers-3102.html

Would these rings work?
http://www.homedepot.com/p/Prime-Lin...6#.UUqim-69KSN

Actually the rings might work out well for your application. The reason I say this is your cover is a basic bag and attached at the edge. If it were say a styled cover like a bucket that uses listing wires on the seating and back faces to pull the cover into the foam shape and hog-ringed to molded in wire forms. Then I would want a small sharp ring.

The pliers might work. They may be too big at the tip end. The spring is a big help too. I'd buy some rings and run by HF to try a pair if they stock them. If they close the ring down to a round pencil size you are good to go. However the tips might need grinding, back toward the cups, to get into tight spots. Most pro pliers have a real high taper to make tips as small as possible. So forget any of the cast metal type pliers you see with a 1/8th or so flat ledge around the tip cups.

[Mister-B]

Originally Posted by SS Tim

Actually the rings might work out well for your application. The reason I say this is your cover is a basic bag and attached at the edge. If it were say a styled cover like a bucket that uses listing wires on the seating and back faces to pull the cover into the foam shape and hog-ringed to molded in wire forms. Then I would want a small sharp ring.

The pliers might work. They may be too big at the tip end. The spring is a big help too. I'd buy some rings and run by HF to try a pair if they stock them. If they close the ring down to a round pencil size you are good to go. However the tips might need grinding, back toward the cups, to get into tight spots. Most pro pliers have a real high taper to make tips as small as possible. So forget any of the cast metal type pliers you see with a 1/8th or so flat ledge around the tip cups.

Thanks for your help!
Posted via Mobile Device