Other Location Not Listed Wanted: 12 Bolt rearend (for leaf spring truck) - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Russ.W. · 02-06-2016, 02:05 AM

Edit: Found one! Thanks folks.

**1rippen6** · 02-06-2016, 09:28 AM

I have several 12 bolts out of blazers may have to move the spring pad width. I would ship through fastenal so someone would need to pick it up at the other end is that doable? If that is possible I can get you some pictures.

gpgofast · 02-06-2016, 12:35 PM

Quote:

Originally Posted by Russ.W.

G'day folks.

Looking for a 12 Bolt rearend for a '67 C10.

Housing must have leaf spring mounts/brackets

Axles/lugs/ratio etc not important. They will be replaced unless it's a perfect combo in great condition.

A bare housing would be ideal.

Seller needs to be willing to have it shipped to my shipping agents in Kelso, Washington. 98626.

I live in Australia so I can't pick it up

I can only pay via PayPal, and I will absolutely need pics.

Thanks for your time.

Cheers,
Russ

I will have one out of my 1971 1/2 ton K10 4X4. In relatively good shape. Please PM me for details. PS. I live in Washington state, so I may be able to deliver for a fee.

Russ.W. · 02-06-2016, 09:56 PM

Quote:

Originally Posted by gpgofast

I will have one out of my 1971 1/2 ton K10 4X4. In relatively good shape. Please PM me for details. PS. I live in Washington state, so I may be able to deliver for a fee.

Unfortunately, I believe 71's are a different width. I'm not interested in modifying housings (with the exception of relocating leaf mounts). Sorry.

Russ.W. · 02-06-2016, 09:58 PM

Quote:

Originally Posted by 1rippen6

I have several 12 bolts out of blazers may have to move the spring pad width. I would ship through fastenal so someone would need to pick it up at the other end is that doable? If that is possible I can get you some pictures.

I'm not sure that's possible but I will send them an email and check.

**1rippen6** · 02-06-2016, 10:02 PM

Quote:

Originally Posted by Russ.W.

I'm not sure that's possible but I will send them an email and check.

The ones I have are out of 72 blazers if that will work.

Russ.W. · 02-06-2016, 10:27 PM

Quote:

Originally Posted by 1rippen6

The ones I have are out of 72 blazers if that will work.

I'm under the impression 72's are a different width. Sorry. I can't use them.

**1rippen6** · 02-06-2016, 10:28 PM

No problem I can get a measurement if you know what you need

Russ.W. · 02-21-2016, 03:52 AM

Bump.

Still in desperate need of one.

HONDAWASAKI · 02-21-2016, 07:40 PM

I have a leaf spring rear end already pulled, but I am not sure if it is a '69, or '70 it measures 58 1/4 flange to flange. Do you have measurements? I also have a '67 coil spring rear end next to it for reference, were they the same width? The coil spring housing measures 56 3/4 flange to flange. So its probably from an '70.

un4gvn! · 02-21-2016, 08:35 PM

I have one with a flip kit if you are lowering it. 100 for just the bare housing. I also have the rest of this rear-end like the series 4 carrier with 4:10 gears, Kal-tech traction, and new shocks. I wouldn't know where to begin on shipping it.

Russ.W. · 02-22-2016, 09:01 PM

Thanks for the response guys. My diff measures exactly 57" from outside of flange, to outside of flange, or 56.5" from inside of flange to inside of flange.

When measuring from outside of flange: 57" (57inch / 4ft 9inch / 1448mm)

When measuring from inside of flange: 56 1/2" (56.5inch / 4ft 8.5inch / 1433mm)

**richard2717** · 02-23-2016, 12:00 AM

I think I have one from my 69 GMC I will measure in the morning. Even if correct , not sure how to go about the shipping but can check on that as well

Russ.W. · 02-23-2016, 02:49 AM

Quote:

Originally Posted by richard2717

I think I have one from my 69 GMC I will measure in the morning. Even if correct , not sure how to go about the shipping but can check on that as well

I appreciate that. Thanks.

**richard2717** · 02-26-2016, 09:59 AM

Russ
The rear end I have is correct but it has some heavy gouges and pitting in the axle tubes on both sides. I tried several times to get some decent pictures but they are not showing up well in the pics. I did attach the best one

.

Russ.W. · 02-27-2016, 02:59 AM

Quote:

Originally Posted by richard2717

Russ
The rear end I have is correct but it has some heavy gouges and pitting in the axle tubes on both sides. I tried several times to get some decent pictures but they are not showing up well in the pics. I did attach the best one.

Thanks Richard. Unfortunately I will have to pass. That doesn't look a whole lot better than the one I already have. Surface rust is fine, but pitting I need to keep away from.

I appreciate the effort though. Thank you.

Sklptrljay · 02-27-2016, 04:04 AM

Name: Screenshot_2016-02-26-23-59-16.jpg
Views: 182
Size: 106.9 KB

Give this guy a call.

02-06-2016, 02:05 AM	#1
Russ.W. Registered User Join Date: Aug 2009 Location: Australia Posts: 275	Found: 12 Bolt rearend (for leaf spring truck) Edit: Found one! Thanks folks. __________________ *Show Me How To Live* *"Wrongside"* My factory right-hand drive '67 C10 build Last edited by Russ.W.; 09-14-2016 at 08:43 AM. Reason: Item found.

02-06-2016, 09:28 AM	#2
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: Wanted: 12 Bolt rearend (for leaf spring truck) I have several 12 bolts out of blazers may have to move the spring pad width. I would ship through fastenal so someone would need to pick it up at the other end is that doable? If that is possible I can get you some pictures.

02-06-2016, 10:28 PM	#8
1rippen6 Senior Member Join Date: May 2011 Location: Greencastle PA Posts: 6,807	Re: Wanted: 12 Bolt rearend (for leaf spring truck) No problem I can get a measurement if you know what you need

02-21-2016, 03:52 AM	#9
Russ.W. Registered User Join Date: Aug 2009 Location: Australia Posts: 275	Re: Wanted: 12 Bolt rearend (for leaf spring truck) Bump. Still in desperate need of one. __________________ *Show Me How To Live* *"Wrongside"* My factory right-hand drive '67 C10 build

02-21-2016, 07:40 PM	#10
HONDAWASAKI Registered User Join Date: Feb 2015 Location: SLC, UT Posts: 114	Re: Wanted: 12 Bolt rearend (for leaf spring truck) I have a leaf spring rear end already pulled, but I am not sure if it is a '69, or '70 it measures 58 1/4 flange to flange. Do you have measurements? I also have a '67 coil spring rear end next to it for reference, were they the same width? The coil spring housing measures 56 3/4 flange to flange. So its probably from an '70. __________________ '67 C10 shortie. Last edited by HONDAWASAKI; 02-21-2016 at 07:48 PM.

02-21-2016, 08:35 PM	#11
un4gvn! Registered User Join Date: Mar 2006 Location: Latrobe, Pa. 15650 Posts: 351	Re: Wanted: 12 Bolt rearend (for leaf spring truck) I have one with a flip kit if you are lowering it. 100 for just the bare housing. I also have the rest of this rear-end like the series 4 carrier with 4:10 gears, Kal-tech traction, and new shocks. I wouldn't know where to begin on shipping it.

02-22-2016, 09:01 PM	#12
Russ.W. Registered User Join Date: Aug 2009 Location: Australia Posts: 275	Re: Wanted: 12 Bolt rearend (for leaf spring truck) Thanks for the response guys. My diff measures exactly 57" from outside of flange, to outside of flange, or 56.5" from inside of flange to inside of flange. When measuring from outside of flange: 57" (57inch / 4ft 9inch / 1448mm) When measuring from inside of flange: 56 1/2" (56.5inch / 4ft 8.5inch / 1433mm) __________________ *Show Me How To Live* *"Wrongside"* My factory right-hand drive '67 C10 build

02-23-2016, 12:00 AM	#13
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,135	Re: Wanted: 12 Bolt rearend (for leaf spring truck) I think I have one from my 69 GMC I will measure in the morning. Even if correct , not sure how to go about the shipping but can check on that as well __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-26-2016, 09:59 AM	#15
richard2717 Equal opportunity joke ofender Join Date: Oct 2011 Location: Eastern Shore of MD Posts: 10,135	Re: Wanted: 12 Bolt rearend (for leaf spring truck) Russ The rear end I have is correct but it has some heavy gouges and pitting in the axle tubes on both sides. I tried several times to get some decent pictures but they are not showing up well in the pics. I did attach the best one . Attached Images __________________ Members I have met. Dually Jams, OlBlue60, ScottH, Tommyboy24, Dujobo, Warbucket, 2003 Silverado, Notsolo, my90k5, 6t727t2, Special-K ,Jack_71C10, tabarcus,72blazer_mud_bogger,pwdcougar,RSavage,EricSean,1Rippen6,invicta455,tennaragtop71,arks, Kendal,Bennett68C10, Perpendicular, Chainsawman, McGeesCustomMinis,ShortbedClayton,longblue72,6768chevylover,Tim71,Travisarmenta,Ol' Drippy,fleetmitch,georgieb51,Dave,bcnya2,Dadsburb https://paypal.me/6772GMtruckparts Most women like the strong, silent type… Fortunately for me, my wife prefers the out-of-shape, mouthy type.

02-27-2016, 04:04 AM	#17
Sklptrljay Registered User Join Date: Apr 2012 Location: Stillwater, Oklahoma Posts: 874	Re: Wanted: 12 Bolt rearend (for leaf spring truck) Give this guy a call. __________________ 1971 C/10 SWB, 15x8 Rallys, 4.5" X 7" static drop, C-notched, 350/350, 3.73 Posi. .........A 383 and Gear Vendors are on my bucket list. 1972 GMC 4X4 K1500 Survivor - Sold No matter what problems life throws at you, your time on Earth can be incredibly fulfilling and rewarding.....if you just lower your expectations. -Phil Dunphy



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.