PS bracket - The 1947 - Present Chevrolet & GMC Truck Message Board Network

rod1701 · 04-25-2020, 12:07 AM

Where can I get one of these?

Part number?

Off 67-72 or 73-87?

Pontiac1976 · 04-25-2020, 12:11 AM

look like 73-87 try rockauto,LMC,CLASSICPARTS

rod1701 · 04-25-2020, 12:35 AM

Quote:

Originally Posted by Pontiac1976

look like 73-87 try rockauto,LMC,CLASSICPARTS

Started there. No suck luck. Only found a couple of Google images. Nothing in any diagrams or part numbers.
Posted via Mobile Device

Pontiac1976 · 04-25-2020, 08:58 AM

#25 The front bracket S/P mounting is 73-78- C,K 350.
The rear bracket S/P support ASM ADJ is 73-78 C,K,P 350.<(This one not the most command used.)
would need more info: what it came in, what option on motor for belts run.
Then lots of Part # them to pick and that still hit miss un till can cross off a few.
This is just one book for 73-78 truck I checked. Group 6.606

**Rickysnickers** · 04-25-2020, 10:51 AM

Try Fred, specialty retail, here on the board. He sells lots of stuff

rod1701 · 04-25-2020, 09:37 PM

Quote:

Originally Posted by Rickysnickers

Try Fred, specialty retail, here on the board. He sells lots of stuff

I think that part would’ve perfect for what I am working on but improvised with old parts. Weak link seems to be the one bolt that that is mounting everything to the manifold. Seem strong enough. We’ll see when I drive a little.
Posted via Mobile Device

Pontiac1976 · 04-26-2020, 08:11 PM

If it work. But looking at your bracket it not the right one for the ex-manifold I think the one in the center works them.http://www.2040-parts.com/70-76-chev...elle-i2040599/

rod1701 · 04-26-2020, 10:29 PM

Thanks. Like I said not happy with it but going to see if holds while keeping my eyes open at the local pick-a-part yards.

Tryouts g to get it back to pretty close to correct for the period. Seems like previous owners kept it up pretty good but maybe improvised with salvage yard parts available. Finding a few Impala and Chevelle pieces as well as 81-87 parts.

Going for a survivor/patina truck so definitely like used OEM stuff.

So far just under $300 under tff grr e hood with a few brackets, maintenance items, hoses, spray paint, plus gobs of carb cleaner/oven cleaner/degreaser, and tons of elbow grease.

Greasey Harley · 04-27-2020, 01:19 AM

I used an Alan Grove 400L in my 68' with a 327 and short water pump. I am quite happy with the quality and fit.
http://www.alangrovecomponents.com/S...Short_Pump.htm
Yours probably needs the bracket for the long water pump.
402L :
http://www.alangrovecomponents.com/S..._Long_Pump.htm

04-25-2020, 12:07 AM	#1
rod1701 Registered User Join Date: Nov 2012 Location: los angeles,ca Posts: 115	PS bracket Where can I get one of these? Part number? Off 67-72 or 73-87? Attached Images __________________ 1979 C-10 LWB

04-25-2020, 08:58 AM	#4
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 752	Re: PS bracket #25 The front bracket S/P mounting is 73-78- C,K 350. The rear bracket S/P support ASM ADJ is 73-78 C,K,P 350.<(This one not the most command used.) would need more info: what it came in, what option on motor for belts run. Then lots of Part # them to pick and that still hit miss un till can cross off a few. This is just one book for 73-78 truck I checked. Group 6.606 __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

04-25-2020, 10:51 AM	#5
Rickysnickers Senior Member Join Date: Oct 2014 Location: Eagle, ID Posts: 2,984	Re: PS bracket Try Fred, specialty retail, here on the board. He sells lots of stuff

04-26-2020, 08:11 PM	#7
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 752	Re: PS bracket If it work. But looking at your bracket it not the right one for the ex-manifold I think the one in the center works them.http://www.2040-parts.com/70-76-chev...elle-i2040599/ __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

04-26-2020, 10:29 PM	#8
rod1701 Registered User Join Date: Nov 2012 Location: los angeles,ca Posts: 115	Re: PS bracket Thanks. Like I said not happy with it but going to see if holds while keeping my eyes open at the local pick-a-part yards. Tryouts g to get it back to pretty close to correct for the period. Seems like previous owners kept it up pretty good but maybe improvised with salvage yard parts available. Finding a few Impala and Chevelle pieces as well as 81-87 parts. Going for a survivor/patina truck so definitely like used OEM stuff. So far just under $300 under tff grr e hood with a few brackets, maintenance items, hoses, spray paint, plus gobs of carb cleaner/oven cleaner/degreaser, and tons of elbow grease. __________________ 1979 C-10 LWB

04-25-2020, 12:11 AM	#2
Pontiac1976 Registered User Join Date: Oct 2015 Location: Ottawa, Ontario, Canada Posts: 752	Re: PS bracket look like 73-87 try rockauto,LMC,CLASSICPARTS __________________ 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.

04-27-2020, 01:19 AM	#9
Greasey Harley Registered User Join Date: May 2013 Location: Post Falls, ID Posts: 885	Re: PS bracket I used an Alan Grove 400L in my 68' with a 327 and short water pump. I am quite happy with the quality and fit. http://www.alangrovecomponents.com/S...Short_Pump.htm Yours probably needs the bracket for the long water pump. 402L : http://www.alangrovecomponents.com/S..._Long_Pump.htm Last edited by Greasey Harley; 04-27-2020 at 01:27 AM.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.