![]() |
Register or Log In To remove these advertisements. |
|
|
|
|||||||
|
|
Thread Tools | Display Modes |
|
|
#16 |
|
Registered User
![]() Join Date: Jul 2007
Location: Toppenish, WA
Posts: 16,391
|
Re: Trying to piece together a project, have questions
Don't get your undies in a knot when the grammer police show up and flat state that your run on sentences and what not are hard to read. Even on a phone one can take the time to use proper punctuation and write a readable sentence or paragraph. I won't say anyting about spelling if you are on a phone though. If you have read enough of what I write as the other guys have you know that often as not I go back and correct spelling or wording to make things read right or some times make sence. Many of us here come from the age long before computers showed up and learned to make proper sentences and paragraphs and not short cut.
Side note: if you were to lay a 51 3100 frame and a 54 3100 frame side by side on saw horses you will see two differences. The crossmember that goes under the bellhousing and the kickup over the rear axle. The big deal being that you can't lower the back of a 54 frame much without a C notch.
__________________
Founding member of the too many projects, too little time and money club. My ongoing truck projects: 48 Chev 3100 that will run a 292 Six. 71 GMC 2500 that is getting a Cad 500 transplant. 77 C 30 dualie, 454, 4 speed with a 10 foot flatbed and hoist. It does the heavy work and hauls the projects around. |
|
|
| Bookmarks |
|
|